In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block gro
btrfs: do not force reloc root creation during qgroup_account_snapshot()
In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not force reloc root creation during qgroup_account_snapshot()
[BUG]
When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota",
it has a high chance to trigger the following kernel warning and flips
the fs RO:
BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup
------------[ cut here ]------------
WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173
CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe109538581
btrfs: zstd: fix lost wakeup when waiting for a workspace
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zstd: fix lost wakeup when waiting for a workspace
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm->wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
O
In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks.
netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()
sip_skip_whitespace() returns dptr unchanged when its own loop
exhausts the buffer (dptr == limit), instead of NULL like its sibling
sip_follow_continuation() returns on its own "no more data" path.
ct_sip_get_header() only checks for NULL after calling it:
dptr = sip_skip_whitespace(dptr, limit);
if (dptr == NULL)
break;
if (*dptr != ':' || ++dptr >= limit)
break;
so a recognized header name followed only by spaces/tabs running to
the exact end of the SIP payload, with no colon,
tracing/probes: Fix use-after-free on field name/type of events with multiple probes
In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Fix use-after-free on field name/type of events with multiple probes
The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and
fprobe events) are created in traceprobe_define_arg_fields() by handing
the probe_arg name/type strings to trace_define_field(), which only
stores the pointers without copying. Those strings are owned by the
trace_probe and are freed when that probe is removed.
An event can have several probes attached. The field list is defined
only once, by the first probe that registers the event, but it is kept
alive by any surviving
bpf: reject BPF_PSEUDO_FUNC reference to the main program
In the Linux kernel, the following vulnerability has been resolved:
bpf: reject BPF_PSEUDO_FUNC reference to the main program
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementati
bonding: do not clear curr_active_slave prematurely when releasing all slaves
In the Linux kernel, the following vulnerability has been resolved:
bonding: do not clear curr_active_slave prematurely when releasing all slaves
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond->curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a
net/rds: use wq_has_sleeper() in release_in_xmit()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in release_in_xmit()
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CP
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
rds_tcp_reset_callbacks() quiesces the transmit path by setting the
path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to
be sampled clear before swapping the underlying socket and calling
rds_send_path_reset().
Sampling the bit clear is not the same as owning it: rds_send_xmit()
can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its
state recheck after taking the lock is a store-buffering pattern (the
resetter writes the state and reads the bit, the sender writes the
bit and reads the
net/rds: acquire the fastpath locks in rds_conn_shutdown()
In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that rech
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op.
In the Linux kernel, the following vulnerability has been resolved:
erofs: disable LZ4 rolling decompression for now
LZ4 rolling decompression [1] was introduced to reduce the memory
footprint of temporary pages:
For many cases, it is needed for users to read small data within
a compressed extent (pcluster), either due to random small read, or
since uptodate folios (typically order-0) cannot be reused for
decompression again since decompression algorithm refills
already-uptodate folios.
Rolling decompression works because LZ4 is LZ77-based and only refers
to the most recent 64 KiB of decompressed data, so in theory only a
bounded rol
ALSA: caiaq: Fix potential double-free at error path
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potential double-free at error path
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared.
bpf: Fix NULL-ptr-deref when showing a void BTF type
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref when showing a void BTF type
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)->show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (ker
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark syscall helpers as sleepable
bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, su