p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux · Seite 38

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux: 671. Davon im KEV-Katalog: 0.

Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 15186

  1. CVE-2026-98056

    Hoch · CVSS 7.5EPSS 0,61%Keine Korrektur veröffentlicht

    nvme: remove stale namespaces by NSID range during scan

    In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_cor

    Veröffentlicht Aktualisiert
  2. CVE-2026-98055

    Nicht bewertetEPSS 0,17%Korrektur verfügbar

    ASoC: Intel: avs: Clean up the bus when fetching ML caps fails

    In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Clean up the bus when fetching ML caps fails snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code shall be checked and accounted for. Address the issue by updating the error-path for avs_pci_probe(). At the same time, if the function in question succeeds but the next part of avs_pci_probe() fails, the hlink list shall be cleaned up before leaving the scope.

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  3. CVE-2026-98046

    Nicht bewertetEPSS 0,17%Korrektur verfügbar

    bpf: Mark bpf_btf_find_by_name_kind() as sleepable

    In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_btf_find_by_name_kind() as sleepable When bpf_btf_find_by_name_kind() finds a type in module BTF, it returns a new BTF object fd through __btf_new_fd(). This reaches anon_inode_getfd(), which can sleep while allocating or expanding the current task fd table. The helper prototype does not set might_sleep, so the verifier allows the helper in non-sleepable contexts such as BPF timer callbacks. The fd allocation can then sleep in softirq context and install the fd into the interrupted task. Mark the helper as sleepable. This preserves calls from the main body o

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  4. CVE-2026-98044

    Mittel · CVSS 4.6EPSS 0,17%Keine Korrektur veröffentlicht

    bpf: Reject legacy packet loads from callbacks

    In the Linux kernel, the following vulnerability has been resolved: bpf: Reject legacy packet loads from callbacks check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a subprogram as an implicit return with R0 set to zero. It calls prepare_func_exit() to explore this synthesized path. When the load is reached directly from a synchronous callback, prepare_func_exit() enforces the callback return contract and marks R0 precise. R0 is not derived from a real instruction on this path, so precision backtracking reaches the callback call with R0 still requested and triggers the "callback unexpected regs" verifier bug. A privileged program

    Veröffentlicht Aktualisiert
  5. CVE-2026-98043

    Mittel · CVSS 6.8EPSS 0,2%Keine Korrektur veröffentlicht

    bpf: Don't infer non-NULL from a pointer with an unbounded offset

    In the Linux kernel, the following vulnerability has been resolved: bpf: Don't infer non-NULL from a pointer with an unbounded offset reg_not_null() decides that a register holds a non-NULL value by looking at its type alone. For pointer types that allow arithmetic the type only guarantees a non-NULL base, in case of an unbound offset the runtime offset value might still add up to NULL. Consider the followng program: r6 = bpf_map_lookup_elem(map, &0); /* present */ if (r6 == 0) return 0; r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */ r8 = r7; r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */ r8 <<=

    Veröffentlicht Aktualisiert
  6. CVE-2026-98041

    Hoch · CVSS 7EPSS 0,15%Keine Korrektur veröffentlicht

    bpf: Don't predict JMP32 pointer vs zero comparisons

    In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'.

    Veröffentlicht Aktualisiert
  7. CVE-2026-98034

    Hoch · CVSS 8.5EPSS 0,2%Keine Korrektur veröffentlicht

    bpf: Mark NULL kptr stores precise

    In the Linux kernel, the following vulnerability has been resolved: bpf: Mark NULL kptr stores precise check_map_kptr_access() permits a scalar store into an untrusted kptr field only when the register is known to contain zero. Unlike other verifier checks whose outcome depends on a scalar value, it does not mark that register precise. A state checkpoint reached with an imprecise zero can therefore prune a second path that reaches the store with an arbitrary nonzero scalar. The program can write attacker-controlled bits into the kptr field and load them back as a PTR_TO_BTF_ID. Call mark_chain_precision() before accepting a known-zero reg

    Veröffentlicht Aktualisiert
  8. CVE-2026-98033

    Hoch · CVSS 7.1EPSS 0,2%Keine Korrektur veröffentlicht

    bpf: Preserve inner map identity in callback frames

    In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve inner map identity in callback frames Callback frame constructors initialize map-typed argument registers with __mark_reg_known_zero() and then restore map_ptr. This clears map_uid, which is the only field distinguishing inner maps that share an inner_map_meta template. When a timer callback invokes bpf_for_each_map_elem() on a second inner map, both the saved first map and the second map value can reach the nested callback as the same template with map_uid zero. bpf_timer_init() then accepts pairing the timer from the second map with the first map. The runt

    Veröffentlicht Aktualisiert
  9. CVE-2026-98031

    Nicht bewertetEPSS 0,17%Korrektur verfügbar

    nexthop: Initialize extack in remove_nh_grp_entry()

    In the Linux kernel, the following vulnerability has been resolved: nexthop: Initialize extack in remove_nh_grp_entry() remove_nh_grp_entry() prints the extack message when a listener fails to replace the reduced nexthop group. However, extack is not initialized and listeners are not required to set a message when returning an error. Neither netdevsim nor mlxsw do so when an allocation fails, resulting in the dereference of an uninitialized stack pointer. Fix by zero-initializing extack, as was done in commit 6347c5314cee ("nexthop: initialize extack in nh_res_bucket_migrate()").

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  10. CVE-2026-98030

    Hoch · CVSS 7EPSS 0,12%Korrektur verfügbar

    net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size

    In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it.

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  11. CVE-2026-98027

    Hoch · CVSS 7EPSS 0,12%Korrektur verfügbar

    net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size

    In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while dumping the policy IDR, clobbering the input value before it has been looked at. That input is the number of entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed policy rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer point

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  12. CVE-2026-98026

    Mittel · CVSS 5.8EPSS 0,17%Keine Korrektur veröffentlicht

    net: bridge: mcast: properly convert mglist to rcu

    In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multicast_del_port_group unlists the port group not using proper rcu helper that preserves the next pointer and after that immediately frees the port group without waiting for rcu grace period. The only rcu walker of mglist is br_multicast_list_adjacent() and it turns out that function has always been buggy because mglist was never properly converted to RCU. Fix it by converting it to rcu and moving its initialization after eth_addr's. Initializing p->next can use RCU_INIT_POINTER because

    Veröffentlicht Aktualisiert
  13. CVE-2026-98025

    Nicht bewertetEPSS 0,23%Korrektur verfügbar

    net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow

    In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow The 0xffff length sentinel detects a router reboot and schedules re-enabling of ethernet mode, but then falls through to the rest of the loop body. The next check is } else if (len > CX82310_MTU) { which is the else of the just-matched if -- it never fires for len == 0xffff. The MTU bound that normally caps the incomplete-packet save path is silently bypassed. With 0xffff > skb->len always true (rx_urb_size is 4096), the incomplete-packet branch saves dev->partial_len =

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  14. CVE-2026-98023

    Hoch · CVSS 7.8EPSS 0,13%Korrektur verfügbar

    vxlan: reject dynamic fdb entries that reference a nexthop id

    In the Linux kernel, the following vulnerability has been resolved: vxlan: reject dynamic fdb entries that reference a nexthop id The commit cited in the Fixes tag allowed VXLAN FDB entries to point to FDB nexthops so that overlay traffic could be load balanced across multiple VTEPs. Such entries can only be configured from user space, cannot be learned and cannot roam. They only make sense with a user space control plane such as E-VPN where data plane learning is disabled. Despite that, the VXLAN driver does not currently prevent such entries from being configured with the "dynamic" flag. The per-nexthop FDB list is only protected by the

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  15. CVE-2026-98022

    Nicht bewertetEPSS 0,18%Korrektur verfügbar

    net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations

    In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize()

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  16. CVE-2026-98021

    Mittel · CVSS 6.8EPSS 0,18%Keine Korrektur veröffentlicht

    net: reject oversized tx_queue_len at netlink parse time

    In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range

    Veröffentlicht Aktualisiert
  17. CVE-2026-98019

    Hoch · CVSS 8.4EPSS 0,17%Keine Korrektur veröffentlicht

    bpf: mark a NULL call argument precise

    In the Linux kernel, the following vulnerability has been resolved: bpf: mark a NULL call argument precise check_func_arg() allows bpf_register_is_null() for nullable arguments w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. check_helper_call() enforces second parameter of the bpf_get_local_storage() to be zero, w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. Grouping these two into one patch, as they share the same fixes tag.

    Veröffentlicht Aktualisiert
  18. CVE-2026-98017

    Hoch · CVSS 7.8EPSS 0,13%Korrektur verfügbar

    net/sched: defer qdisc freeing after failed creation

    In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain.

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  19. CVE-2026-98016

    Nicht bewertetEPSS 0,17%Korrektur verfügbar

    net/mlx5e: Fix use-after-free race in sample_restore_put()

    In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free race in sample_restore_put() Concurrent teardown of TC sample rules sharing the same restore context may re-read restore->count after dropping restore_lock. At that point another thread may already have completed cleanup and freed the restore object. Use the result of the refcount decrement while holding restore_lock to determine whether cleanup is needed.

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert
  20. CVE-2026-98015

    Nicht bewertetEPSS 0,18%Korrektur verfügbar

    net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put

    In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is

    • Auf 6.1.190-1 aktualisieren
    Veröffentlicht Aktualisiert

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →