linux vulnerabilities · Page 17

drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl()

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl() virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create() error paths instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead.

• Update to 6.1.190-1

drm/virtio: release the GEM object on virtio_gpu_vram_create() errors

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: release the GEM object on virtio_gpu_vram_create() errors virtio_gpu_vram_create() frees the object with a bare kfree(vram) on both error paths after drm_gem_private_object_init() has run, and on the second one after drm_gem_create_mmap_offset() has linked obj->vma_node into the device's VMA offset manager. The freed object stays in that interval tree, so a later lookup or insertion walks freed memory, and the dma_resv and gpuva lock are never destroyed. Call drm_gem_object_release() before kfree() on both paths.

• Update to 6.1.190-1

Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough Fix multiple out-of-bounds reads in Bluetooth BNEP frame processing: 1. In bnep_rx_frame() and bnep_ctrl_frame() (net/bluetooth/bnep/core.c), use pskb_may_pull() to verify the BNEP header, control type byte, filter count, and extension headers exist before reading them, and return 0 after handling BNEP_CONTROL instead of falling through to Ethernet frame submission when no extension headers follow. 2. In bnep_net_xmit() (net/bluetooth/bnep/netdev.c), verify skb->len >= ETH

• Update to 6.1.190-1

ipv6: Prevent rt6_insert_exception() for dying fib6_info.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info. Before the cited commit, fib6_nh_flush_exceptions() always set from->exception_bucket_flushed = 1 under rt6_exception_lock to prevent rt6_insert_exception() from inserting a new exception for a dying fib6_info. The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED bit stored in nh->rt6i_exception_bucket. The problem is that now the bit is only set when the bucket is not NULL and fib6_nh_flush_exceptions() is called from fib6_nh_release() after fib6_ref has already reached zero. If rt6_insert_exception() is

net: usb: sr9700: include receive overhead in the length check

In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtracts the Ethernet CRC from the reported packet length, but compares that payload length against the whole remaining receive buffer. The following copy starts after the three-byte header, and the cursor advance consumes both that header and the four-byte CRC. Require the payload to fit after SR_RX_OVERHEAD before copying it or advancing to the next packet. The loop already ensures that the remaining buffer is larger than the overhead, so the subtraction is safe. The issue was found by our

• Update to 6.1.190-1

tg3: clean up PHYLIB resources on probe failure

In the Linux kernel, the following vulnerability has been resolved: tg3: clean up PHYLIB resources on probe failure tg3_get_invariants() can register an MDIO bus and connect a PHY for USE_PHYLIB devices. If tg3_init_one() later fails, its common error path releases the mappings and netdev without undoing those PHYLIB resources. Disconnect the PHY and unregister the MDIO bus before the remaining teardown. Guard PHY cleanup with USE_PHYLIB to match tg3_phy_init(), and call tg3_mdio_fini() unconditionally to match tg3_mdio_init(). The existing IS_CONNECTED and MDIOBUS_INITED flags make both helpers safe when initialization only completed part

• Update to 6.1.190-1

s390/debug: Fix NULL pointer dereference in debug_info_copy()

In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_info_copy() When debug_register_static() fails, it clears areas, active_pages and active_entries but leaves the area bounds unchanged. Copying such an area, either by opening its view file or via debug_dump(), makes debug_info_copy() dereference the NULL pointers. Skip the copy loop when the source has no areas.

• Update to 6.1.190-1

bpf: Fix bpf_sock context code generation

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sock context code generation Currently, the ctx access code reads the rx_queue_mapping field with either a 4-byte or 2-byte load. The rest of the bits in the register are marked known zero by the verifier. However, the emitted ctx access code places in the register on certain the special value (-1) using BPF_MOV_IMM64, which gets sign-extended to turn on all the bits in the register. By shifting this value right, the program ends up with a value at runtime above what the verifier assumes is possible. Fix this by ensuring the read value is as wide as the assume

• Update to 6.1.190-1

bpf: Reject pkt arguments in mutating subprogs

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject pkt arguments in mutating subprogs The verifier tracks changes in how PTR_TO_PACKET registers' bounds are modified across subprog boundaries. PTR_TO_PACKET registers are actually passed as PTR_TO_MEM, which is assumed valid for the entire call. This is not the case with packet memory, where a pskb_* call may invalidate its memory region. Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET because we would also need to somehow pass the PTR_TO_PACKET_META or PTR_TO_PACKET_END

bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject max_entries > INT_MAX in sock_map_alloc sock_map_alloc() only rejects max_entries == 0 and otherwise allows any u32 value. sock_map_free() then walks the sks[] array with a signed int iterator: int i; for (i = 0; i < stab->map.max_entries; i++) struct sock **psk = &stab->sks[i]; When a SOCKMAP is created with max_entries = 0xffffffff (UINT_MAX), the allocation of 32 GiB can succeed on large-memory hosts. During free the counter reaches 0x80000000, wraps to INT_MIN, is sign-extended by movslq and turned into a ~16 GiB negative offset from stab->s

• Update to 6.1.190-1

sctp: hold asoc or transport before mod_timer() in timer handlers

In the Linux kernel, the following vulnerability has been resolved: sctp: hold asoc or transport before mod_timer() in timer handlers Take the association or transport reference before rearming a timer in the timer handlers. The existing code calls mod_timer() before taking the reference needed by the rearmed timer without holding the sock lock. This creates a race with timer cleanup: if the timer is deleted after mod_timer() returns but before the reference is taken, the cleanup path can drop the timer's reference and destroy the transport or association. The timer handler then takes a reference on the already freed object and eventually

• Update to 6.1.190-1

nfc: nfcmrvl: validate helper command length before pull

In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header.

• Update to 6.1.190-1

nfc: st21nfca: validate received frame size

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate received frame size st21nfca_hci_i2c_repack() trims a received frame at its EOF marker before removing byte stuffing. It then assumes the truncated frame contains the LLC header and two CRC bytes, and it unconditionally reads the byte after an escape marker. A malformed frame can place EOF immediately after the start marker or can end its data portion with an escape marker. The former leaves too few bytes for check_crc(), while the latter makes the unstuffing loop read past the current skb length. Require the minimum framing bytes both before and

• Update to 6.1.190-1

nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm()

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix list corruption / refcount desync in nfc_llcp_recv_dm() nfc_llcp_recv_dm() handles DM(NOBOUND)/DM(REJ) for a socket that is still linked on local->connecting_sockets: it looks the socket up with nfc_llcp_connecting_sock_get(), sets sk->sk_state = LLCP_CLOSED and returns, without taking the socket lock and without unlinking the socket from the connecting_sockets list. llcp_sock_release() selects the list to unlink from by sk_state: a socket in LLCP_CONNECTING is unlinked from connecting_sockets, otherwise from the sockets list. Because recv_dm left the socke

• Update to 6.1.190-1

nfc: llcp: Fix race condition in accept_queue lifecycle

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation r

• Update to 6.1.190-1

nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix sdreq TLV list leak on parse/alloc/send failure nfc_genl_llc_sdreq() builds a list of TLV nodes while walking nested netlink attrs, but 3 error paths (nested-attr parse failure, TLV alloc ENOMEM, nfc_llcp_send_snl_sdreq() failure) all skip freeing what was already queued. Route them through a new free_list label, mirroring the SDRES path in the same file which already does this. Harmless on the success path too -- send_snl_sdreq() drains the list as it moves nodes, so it's already empty by the time free_list runs.

• Update to 6.1.190-1

nfc: st21nfca: validate ISO15693 inventory length

In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ISO15693 inventory length The ISO15693 inventory helper removes a two-byte prefix without checking that it exists, then accepts a one-byte remainder before reading data[1] as the DSFID. Require the prefix and at least two remaining bytes before copying the UID data and reading the DSFID.

• Update to 6.1.190-1

nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap()

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix WKS SAP hijacking via prefix match in nfc_llcp_wks_sap() nfc_llcp_wks_sap() compares only service_name_len bytes, so a short service_name like "u" matches longer WKS strings like "urn:nfc:sn:snep". Fix by requiring exact length match before strncmp().

• Update to 6.1.190-1

nfc: llcp: fix slab-out-of-bounds reads when logging service names

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix slab-out-of-bounds reads when logging service names nfc_llcp_wks_sap() and nfc_llcp_build_sdreq_tlv() pass non-null- terminated strings to pr_debug() using the %s format specifier. The buffers are allocated via kmemdup() or come from netlink attributes and are not guaranteed to be null-terminated, causing __dynamic_pr_debug() to read beyond the allocated region: KASAN: slab-out-of-bounds Read in __dynamic_pr_debug Fix both call sites by using %.*s with the explicit length to limit the output to the actual length of the string.

• Update to 6.1.190-1

nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid()

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" off

• Update to 6.1.190-1