linux vulnerabilities · Page 35

netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details?

• Update to 6.1.190-1

wifi: mt76: mt7921: validate CLC firmware records

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying.

• Update to 6.1.190-1

ppp_async: drop the errored frame instead of resetting its headroom

In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocat

• Update to 6.1.190-1

EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation

In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU.

• Update to 6.1.190-1

drm/virtio: use the DMA API for resource backing on Xen

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api

nvme-rdma: fix -EIO cleanup order in queue_rq

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path.

• Update to 6.1.190-1

drm/gud: validate GUD_ROTATION_0 is present in supported rotations

In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit

drm/cirrus-qemu: Validate BAR0 size during probe

In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copi

net: stmmac: fix dma mapping leak in stmmac_tso_xmit()

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma mapping leak in stmmac_tso_xmit() In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the frame is dropped but the DMA mappings already created for the linear part and for the fragments mapped before the failure are never unmapped, leaking DMA mappings. Fix the leak by walking back over the descriptors used by the frame and releasing each of them with stmmac_free_tx_buffer(). Moreover, release the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers.

sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START

In the Linux kernel, the following vulnerability has been resolved: sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START The SCTP_CMD_TIMER_START handler checks timer_pending() before calling timer_reduce(). The timer can expire and detach between these operations, causing timer_reduce() to rearm the timer without taking the association reference required for the newly armed timer. The timer callback later unconditionally drops its association reference, which can leave the association reference count unbalanced and result in use-after-free during association teardown. Use the return value of timer_reduce() to determine whether the timer was a

• Update to 6.1.190-1

scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add() sas_port_alloc_num() can return NULL on memory allocation failure. The return value is passed directly to sas_port_add() without a NULL check, which causes a NULL pointer dereference. Additionally, if sas_port_add() fails, the allocated port is not freed before jumping to out_fail, leaking the sas_port structure. Call sas_port_free() to properly release it.

• Update to 6.1.190-1

scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add() mpi3mr_get_tgtdev_by_addr() increments the target device kref when it returns a device. If a subsequent error triggers a goto out_fail after the tgtdev reference is acquired, the reference is never released because the out_fail path does not call mpi3mr_tgtdev_put(). This prevents the target device structure from ever being freed. Add a tgtdev put in the out_fail path, guarded by a NULL check since tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup path is shared by earlier error case

• Update to 6.1.190-1

smb/client: validate new EOF for insert range

In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for insert range smb3_insert_range() does not check if the new file size (i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t range. Use check_add_overflow() to calculate the new EOF. Validate it with inode_newsize_ok() before modifying the file. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB # A regular write is stopped at 3 MiB. dd if=/dev/zero of="$FILE" bs=1M c

smb/client: validate new EOF for zero range

In the Linux kernel, the following vulnerability has been resolved: smb/client: validate new EOF for zero range When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE, smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing the file to grow beyond the caller's file-size limit. Fix this by calling inode_newsize_ok() before sending the zero-range request when the operation would extend EOF. Reproducer, using a file on a CIFS mount: bash -c ' FILE=/mnt/cifs/repro trap "" SIGXFSZ ulimit -f 3072 truncate -s 2M "$FILE" fallocate --zero-range -o 0 -l 4M "$FILE" ech

smb/client: fix stale page cache in insert/collapse range

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix stale page cache in insert/collapse range smb3_insert_range() and smb3_collapse_range() use truncate_pagecache_range() to invalidate the affected page cache. However, if off or old_eof is not page-aligned, the boundary pages are only partially zeroed and remain uptodate. As a result, the client may return stale data after a successful insert/collapse range operation. For example, with 4K pages: page 0 page 1 page 2 0------4K 4K------8K 8K------12K ^ ^ off=2K

smb/client: invalidate fscache for fallocate range operations

In the Linux kernel, the following vulnerability has been resolved: smb/client: invalidate fscache for fallocate range operations smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and smb3_collapse_range() modify file contents through server-side range operations. These operations discard the affected page cache, but leave the FS-Cache cookie valid, so a later read may return data cached before the range operation. Fix this by invalidating FS-Cache after outstanding I/O has completed and before modifying the file on the server. Run the following as root on a CIFS mount with fsc enabled and an active CacheFiles backend: b

sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration

In the Linux kernel, the following vulnerability has been resolved: sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration sctp_verify_asconf() walks ASCONF-ACK parameters with sctp_walk_params(), which advances by SCTP_PAD4(length), while the consumer sctp_get_asconf_response() iterates the same parameters advancing by the raw length, without padding. A single odd-length parameter desynchronises the two walks and makes the consumer interpret attacker-controlled bytes at a misaligned offset. When those bytes yield a length of zero, the while loop over asconf_ack_len makes no progress, spinning forever in softirq context, and th

• Update to 6.1.190-1

watchdog: msc313e: Fix NULL pointer dereference in PM callbacks

In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix NULL pointer dereference in PM callbacks msc313e_wdt_probe() doesn't set the driver data for the platform device. As a result, dev_get_drvdata() in msc313e_wdt_suspend() and msc313e_wdt_resume() will return NULL, leading to a NULL pointer dereference afterward. Set the platform device driver data in msc313e_wdt_probe().

• Update to 6.1.190-1

ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation with an mmap_count check performed under the PCM stream lock, but the lock is released long before the buffer is actually freed: snd_pcm_sync_stop(), constraint refinement and do_free_pages() all happen in between. snd_pcm_mmap_data(), on the other hand, takes no lock at all: it validates against the old buffer's state and dma_bytes, remaps its pages into the VMA, and only then increments mmap_count. A concurrent mmap() can therefore s

• Update to 6.1.190-1

ksmbd: propagate DACL parsing errors

In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated.