linux vulnerabilities · Page 56

platform/x86: lg-laptop: Fix LED resource handling

In the Linux kernel, the following vulnerability has been resolved: platform/x86: lg-laptop: Fix LED resource handling The event notification callback might access kbd_backlight even when it was not successfully registered with the LED subsystem. The same happens inside acpi_remove(), where the LED devices are unregistered unconditionally. Fix this by tracking the availability of the kbd_backlight LED device and use devm_led_classdev_register() to let devres take care of unregistering the LED devices during removal. For this the parent device of the LED devices is changed to the native platform device.

bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max check_kfunc_args() detects a kfunc argument named rdonly_buf_size or rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64, and does not bound it. check_kfunc_call() later copies that value into the returned register's mem_size field: meta->r0_size = reg->var_off.value; ... regs[BPF_REG_0].mem_size = meta.r0_size; regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set gets truncated instead of causing a load-time rejection, so the verifier records a PTR_TO_MEM regis

usb: gadget: uac: validate rate list length before storing

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UA

usb: gadget: configfs: fix out-of-bounds read of qw_sign

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: fix out-of-bounds read of qw_sign os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input length to utf16s_to_utf8s(), but that argument counts UTF-16 code units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[]. The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the conversion reads up to 7 units (14 bytes) past the end of qw_sign[] into the following members of struct gadget_info when the stored signature fills the array without a NUL terminator, exposing those bytes through the configfs attribute. The store pat

• Update to 6.1.190-1

usb: gadget: aspeed_udc: check endpoint DMA allocation

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed_udc: check endpoint DMA allocation ast_udc_probe() allocates a coherent DMA buffer used as the backing store for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer pointers from udc->ep0_buf, so a failed allocation is dereferenced during probe. Check the allocation before endpoint setup. The existing probe error path called ast_udc_remove(), which unregisters the gadget unconditionally and is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup helper for probe failures so pre-registration failures only unwind the resources th

• Update to 6.1.190-1

usb: fix UAF when probe runs concurrent to dyn ID removal

In the Linux kernel, the following vulnerability has been resolved: usb: fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held, as remove_id_store can free the node. Thus, make a copy in usb_probe_interface. Clarify the documentation that the id parameter is only valid during the probe. USB serial has the same pattern, but it does not need fixing as the IDs cannot be removed via sysfs.

• Update to 6.1.190-1

platform/x86: asus-wmi: fix resource leaks on probe failure

In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix resource leaks on probe failure During driver initialization in asus_wmi_add(), various subsystems are registered sequentially. However, the error path labels are out of order relative to the registration sequence. Specifically: 1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to fail_custom_fan_curve. Because this label is placed below fail_sysfs, it bypasses the cleanup calls for the input device and sysfs groups, which were successfully registered before, leaking those resources. 2. If asus_screenpad_init() fails, the d

platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL

In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to acpi_device_hid(), which dereferences it, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. Accordingly, add a requisite ACPI_COMPANION() check again

• Update to 6.1.190-1

platform/surface: acpi-notify: Check ACPI companion before use

In the Linux kernel, the following vulnerability has been resolved: platform/surface: acpi-notify: Check ACPI companion before use Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. san_probe() dereferences the result of ACPI_COMPANION() when installing the GSBUS address space handler, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. The dereference was introduced when the probe function

• Update to 6.1.190-1

RDMA/core: Wait for RCU callbacks before unloading ib_core

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with call_rcu() and implemented in ib_core. Stopping the workqueues does not drain callbacks already queued, so RCU could invoke it after the module code has been unloaded. synchronize_rcu() does not wait for callbacks. Wait for them after all producers have stopped.

• Update to 6.1.190-1

RDMA/mlx5: Drain RCU callbacks during module teardown

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain queued after the last DevX event file drops its module reference or an auxiliary driver detaches its devices. mlx5_ib can then unload before the callback runs. Registration error unwind has the same risk because driver registration can attach existing devices before failing. Wait after all drivers have stopped.

• Update to 6.1.190-1

RDMA/ipoib: Drain RCU callbacks during module teardown

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can be signaled from inside an RCU callback. Teardown can wake before the callback returns and unload ib_ipoib while its code is still executing. Client registration failure can also remove already-added devices and queue callbacks. Wait after client and workqueue teardown.

• Update to 6.1.190-1

esp: do not unref managed frag pages in esp_ssg_unref()

In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page references held on the source scatterlist after the AEAD operation completes. It calls skb_page_unref() on every frag page for an out-of-place transform (req->src != req->dst), and in the error path of esp_output_tail() (already_unref == true) on the request's own scatterlist. This is wrong when the skb carries managed frags (SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf and the skb does not hold a per-frag page reference; io_uring SEND_ZC with a registered bu

RDMA/rvt: Return NULL after port allocation failure

In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure.

RDMA/hfi1: Preserve unit 0 on allocation failure

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the device was inserted into the unit table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the zero-initialized unit remains zero, so full cleanup can remove an unrelated device from index 0. Release only the rdmavt allocation and return immediately while the unit table has not acquired the device.

• Update to 6.1.190-1

RDMA/hfi1: Free RX data on late probe failure

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Free RX data on late probe failure hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning. If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears down the device data without calling hfi1_free_rx(). This leaks netdev_rx and its dummy netdev. Free the RX support after IB unregistration and before postinit_cleanup(), as done on normal device removal.

• Update to 6.1.190-1

fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()

In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that need the structure to remain valid across a sleep (while waiting on acquiring rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with rdtgroup_kn_put(). The release path is intended to serve as the fallback freer: if the count drops to zero and the group has already been marked RDT_DELETED, rdtgroup_kn_put() frees the structure. The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting from a resctrl d

fs/resctrl: Fix UAF from worker threads when domains are removed

In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix UAF from worker threads when domains are removed The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters and may sleep while doing so. They are scheduled via delayed_work embedded in struct rdt_l3_mon_domain. Architecture allocates and frees these domains from CPU hotplug callbacks under cpus_write_lock(), and the workers acquire cpus_read_lock() to keep the domain alive across their access. A use-after-free can occur when a worker is blocked waiting for cpus_read_lock() while the hotplug core holds cpus_write_lock(): the architecture f

rpmsg: glink: fix deadlock in endpoint destroy during driver detach

In the Linux kernel, the following vulnerability has been resolved: rpmsg: glink: fix deadlock in endpoint destroy during driver detach During driver detach, the device core holds the device mutex throughout the driver's remove callback chain. When the rpmsg endpoint is destroyed as part of that teardown, the GLINK endpoint destroy implementation attempts to unregister the underlying rpmsg device. That unregistration calls device_del(), which tries to re-acquire the same device mutex already held higher up the stack, causing rmmod to hang indefinitely. The deadlock manifests with the following call chain: [<0>] device_del+0x44/0x414  <-

• Update to 6.1.190-1

hfsplus: validate thread record before delete key rebuild

In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread n

• Update to 6.1.190-1