linux vulnerabilities · Page 64

IB/isert: post the full-feature receive buffers after session registration

In the Linux kernel, the following vulnerability has been resolved: IB/isert: post the full-feature receive buffers after session registration isert_put_login_tx() posts the full-feature receive buffers before __transport_register_session() runs, so an initiator that does not wait for the final Login Response can still have a SCSI command executed against an se_session whose se_tpg is NULL - the same oops as the previous patch, at target_submit+0xbe. Post them from isert_get_rx_pdu(), which the previous patch already uses to send that response, and post them before that send: the receive queue is filled at the moment the initiator is told

• Update to 6.1.190-1

RDMA/siw: Fix use-after-free in siw_accept()

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix use-after-free in siw_accept() siw_accept() looks up the QP supplied by userspace. If that QP is already in RTS, the function jumps to error cleanup before associating the incoming CEP with it. The cleanup tests whether qp->cep is non-NULL and assumes the current call installed the association. However, qp->cep can point to the CEP of an existing connection. The cleanup then drops a reference from the incoming cep, not qp->cep. Once the incoming endpoint loses its remaining references, this can free it before the subsequent cep->qp store, causing a use-after-

• Update to 6.1.190-1

arm64: hibernate: Restore DAIF state on error

In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Restore DAIF state on error Sashiko AI has reported that if swsusp_mte_save_tags() for some reason fails we return from swsusp_arch_suspend() with DAIF being masked - that is not what we'd expect. Restore the saved DAIF state before returning from the error path.

• Update to 6.1.190-1

drm/amd/display: Resize MST HDCP per-connector arrays to 32

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Resize MST HDCP per-connector arrays to 32 AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of 32 connectors. But the way it's used is like MAX_DISPLAY_COUNT. Hence we're off by one with DRM core, which supports a max of 32 connectors. Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT to match its actual use, and increase the size to 32 to match the originally intended size.

phy: sunplus: fix error handling in sp_uphy_init()

In the Linux kernel, the following vulnerability has been resolved: phy: sunplus: fix error handling in sp_uphy_init() Fix the error paths of sp_uphy_init() to undo exactly what each stage did: return directly if clk_prepare_enable() fails, release only the clock if reset_control_deassert() fails, and jump to err_reset if update_disc_vol() fails so the clock and reset are not leaked.

• Update to 6.1.190-1

drm/amdgpu/gfx6: Use PFP on the compute queues too

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: Use PFP on the compute queues too On GFX6, the compute rings use the same CP path as the graphics ring. The only difference is that they don't support draw commands. (As opposed to GFX7 and newer which have a separate command parser that is called MEC for compute queues.) This means that we have to take into consideration that the PFP also exists on compute queues on GFX6: Use PFP for register writes on both graphics and compute queues. In the pipeline sync, use the PFP to wait for the previous fence (and not the ME) to prevent the PFP from starting to e

• Update to 6.1.190-1

scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time after releasing optrom_mutex. The repeated read is redundant and, unlike the first, runs without optrom_mutex held, exposing flash access to concurrent optrom operations. Drop the duplicate call.

• Update to 6.1.190-1

firmware_loader: do not queue completed sysfs fallback requests

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: do not queue completed sysfs fallback requests fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to pending_fw_head. device_add() publishes the fallback loading interface, so a userspace helper which discovers the device by scanning sysfs can write 0 to the loading attribute and complete the request before it is queued as pending. In that interleaving firmware_loading_store() calls fw_state_done() while pending_list still points to itself, so it cannot remove an entry from pending_fw_head. The subsequent unconditional list_add() then qu

• Update to 6.1.190-1

hugetlbfs: release subpool on fill_super failure

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: release subpool on fill_super failure hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size mount options are specified. hugepage_new_subpool() may also reserve huge pages for min_size. If root dentry creation fails after the subpool is created, the failure path frees the subpool with kfree(). This bypasses hugepage_put_subpool() and can leave min_size reservations charged. Use hugepage_put_subpool() on the failure path, matching the normal put_super path.

• Update to 6.1.190-1

phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend Runtime PM must be enabled before creating the PHY, since phy_create() only enables runtime PM on the PHY device if it is already enabled on this parent device. However, the runtime PM callbacks dereference the hsphy instance, which is not yet ready, leaving a window where a suspend callback may trigger a NULL pointer dereference. Take a runtime PM usage reference with pm_runtime_get_noresume() before enabling runtime PM and release it once the PHY has been created, so that no runtime suspend can ru

• Update to 6.1.190-1

coresight: etm4x: fix underflow for usage of (nrseqstate - 1)

In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS

• Update to 6.1.190-1

coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable

In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths.

scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bvec() allocates a special payload page for UNMAP and WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI midlayer does not call uninit_command() because RQF_DONTPREP is not set yet, leaking the page. Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after freeing the page.

btrfs: defrag: fix deadlock between defrag and delalloc space reservation

In the Linux kernel, the following vulnerability has been resolved: btrfs: defrag: fix deadlock between defrag and delalloc space reservation While running fsstress with autodefrag and flushoncommit, hit a deadlock due to the fact that defrag reserves delalloc space while it's holding dirty and locked folios, besides the extent range lock. The stack traces are the following: [958.624] task:kworker/u50:3 state:D stack:0 pid:20365 tgid:20365 ppid:2 task_flags:0x4208060 flags:0x00080000 [958.626] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [958.627] Call Trace: [958.628] <TASK> [958.628] __

btrfs: always wait for ordered extents to avoid OE races

In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384

btrfs: check if root is readonly when setting posix acl

In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs read-only property set to true, all write operations including acl and xattr should be denied. However, acl can still be set even if btrfs ro property is true. This happens because no function on the set_acl code path checks the root is readonly or not. It was checked in btrfs_setxattr_trans() but got removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root check in btrfs_setxattr_trans") That commit didn't check if all the callers properly check the root's read-only fla

btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data() In that function, we round down the start position and round up the ending position. But during the calculation of @len, we use "round_up(start + len, sectorsize)", which is the rounded up end position, not the rounded up length. Which results a much larger length, and later we are still using "start + len", which is completely incorrect. Fix it by declaring a local @aligned_start and @aligned_len and use them instead.

Bluetooth: virtio_bt: avoid OOB read of build info string

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read Build Information) and hands the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length. A backend that answers with status only leaves that pointer past the end of the received data, so the walk reads adjacent slab memory until it meets a NUL. Those bytes reach the kernel log and the firmware-info debugfs file. To fix this, print the string with a bounded "%.*s" limited to skb->len

• Update to 6.1.190-1

Bluetooth: hci_conn: fix the SCO setup context lifetime

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix the SCO setup context lifetime hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so the context is only freed if hci_enhanced_setup_sync() actually runs. An entry that is cancelled instead is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. The context also stores a bare hci_conn pointer, so the connection can be freed while the work is queued. The dequeue in hci_conn_del() does not cov

• Update to 6.1.190-1

Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths adv_timeout_expire() hands a kmalloc()ed instance byte to hci_cmd_sync_queue() with a NULL destroy callback, and only adv_timeout_expire_sync() frees it. That leaks on two paths: - the return value is not checked, and hci_cmd_sync_queue() does not take ownership when it fails (-ENETDOWN, -ENODEV, -ENOMEM); - a cancelled entry is not released, as _hci_cmd_sync_cancel_entry() does not free entry->data when there is no destroy callback. hci_cmd_sync_clear() cancels every pending ent

• Update to 6.1.190-1