ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
Patch series "ocfs2: cluster: o2hb_region_pin() fixes", v2.
This series fixes three related issues in o2hb_region_pin(), all are from
the original implementation in commit: 58a3158a5d17 ("ocfs2/cluster:
Pin/unpin o2hb regions"):
1) It is called with o2hb_live_lock (a spinlock) held, but the
underlying configfs_depend_item() sleeps (takes inode rwsem and
pins the filesystem). This triggers BUG under
CONFIG_DEBUG_ATOMIC_SLEEP.
2) When called from the configfs drop_item callback, it crea
ocfs2: fix readdir position truncation on 32-bit kernels
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix readdir position truncation on 32-bit kernels
In ocfs2_dir_foreach_blk_el(), the directory cookie position is
rebuilt with
ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) | offset;
`ctx->pos` is loff_t (signed 64-bit), while `sb->s_blocksize` is
unsigned long. On 32-bit kernels unsigned long is 32-bit, so the mask
~(sb->s_blocksize - 1)
is computed as a 32-bit unsigned value (e.g. 0xfffff000 for a 4 KiB
block size). In the AND expression with the 64-bit `ctx->pos`, that
unsigned operand is zero-extended to 64 bits per the usual arithmetic
conversions, yiel
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
In the Linux kernel, the following vulnerability has been resolved:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write pr
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Kee
High · CVSS 7.8EPSS 0.13%Public exploitFix available
openvswitch: only skb_tx_error() a packet we are about to drop
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: only skb_tx_error() a packet we are about to drop
queue_userspace_packet() borrows the packet skb -- it only copies it into
a private netlink message (user_skb) and does not own it; on return
do_execute_actions() keeps forwarding it through the flow's remaining
actions. Its error path nevertheless calls skb_tx_error(skb), which via
skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY,
stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc
says "skb must be freed afterwards").
For a MSG_ZEROCOPY skb carrying page-cache frags,
lockd: pin next file across nlm_inspect_file lock-drop
In the Linux kernel, the following vulnerability has been resolved:
lockd: pin next file across nlm_inspect_file lock-drop
nlm_traverse_files() pins the current file with f_count++ across
a mutex_unlock for nlm_inspect_file(), but nothing pins the saved
next pointer. A concurrent nlm_release_file() can kfree the next
file during the unlock window, and the iterator dereferences freed
memory on the next loop step.
Pin both current and next before the lock-drop. Advance by
swapping the pinned cursors at the end of each iteration so next
is always held alive across the unlock.
Always call nlm_file_release() after dropping the iteration pin,
lockd: fix NULL dereference on lockowner allocation failure
In the Linux kernel, the following vulnerability has been resolved:
lockd: fix NULL dereference on lockowner allocation failure
nlmclnt_locks_init_private() installs NLM file lock operations even when
nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc()
then returns -ENOMEM, but the VFS still tears down the partially
initialized file_lock and calls locks_release_private().
That invokes nlmclnt_locks_release_private(), which dereferences
fl->fl_u.nfs_fl.owner and crashes because the owner was never installed.
Clear fl_ops before attempting to initialize the NLM private state, and
install the NLM lock operations only after
In the Linux kernel, the following vulnerability has been resolved:
nvme: zero the discard fallback page
nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) *
NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges
the command declares, because some devices ignore the 'Number of Ranges'
field - the Fixes: commit records two that read past the declared ranges.
A single-range discard fills only the first 16 bytes.
Normally the buffer comes from kzalloc() and the other 4080 bytes are
zero. When that allocation fails the code falls back to the
per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with
al
nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
Commit 25e5cb780e62 ("nvme-tcp: fix possible crash in write_zeroes
processing") established that blk_rq_payload_bytes() must not be read
without first checking blk_rq_nr_phys_segments(), and recorded the
result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side
was left as it was.
The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments
but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched
while the receive gate lets a C2HData through and nvme_tcp_recv_data()
copies
nvme-tcp: fix host memory disclosure on R2T for a read command
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix host memory disclosure on R2T for a read command
nvme_tcp_handle_r2t() does not check the direction of the request the
R2T refers to. A malicious controller can send an R2T for a READ and
the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the
H2CData header and nvme_tcp_try_send_data() sends the request's data
buffer. That buffer is the READ destination, so its contents go to the
controller.
The command then completes normally and nothing is logged.
Against a test controller that answers every READ with an R2T, a 4096
byte buffered read returned a
nvme-tcp: reject a read that transferred too few bytes
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: reject a read that transferred too few bytes
nvme_tcp_recv_data() completes a request once the current C2HData PDU
has been consumed. Nothing compares the total bytes received against
the length the command asked for: struct nvme_tcp_request has no
receive-side counter, queue->data_remaining is per queue, and
blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally
with no residual concept anywhere above.
A controller can therefore answer a 4096-byte read with 512 bytes and
have it reported as a complete read; user space then gets 4096 bytes of
which 3
sctp: stop processing a packet once its association is deleted
In the Linux kernel, the following vulnerability has been resolved:
sctp: stop processing a packet once its association is deleted
sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is
NULL, and caches the result in chunk->asoc and chunk->transport without
taking a reference.
A packet that matches no association is handed to the endpoint, so a peer
can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The
COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and
with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(),
so the association and its transports are freed.
The endpoint l
In the Linux kernel, the following vulnerability has been resolved:
sctp: drop a chunk if its transport was removed
sctp_rcv() resolves the transport once per packet and leaves it in
chunk->transport. The lookup reference, or the one sctp_add_backlog() takes
if the socket is owned by userspace, keeps it around until the chunk has
been processed.
An authenticated ASCONF DEL-IP can remove it in the meantime.
sctp_assoc_rm_peer() takes the transport out of the association and calls
sctp_transport_free(), which tags it dead and drops the reference the
association held. There is a window on both paths: the packet can sit on
the socket backlog,
sctp: fix NULL deref on untransmitted RECONF completion
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix NULL deref on untransmitted RECONF completion
sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and
sctp_process_strreset_resp() complete a pending stream reconfiguration
request by stopping the reconf timer on the transport it was sent on:
t = asoc->strreset_chunk->transport;
if (timer_delete(&t->reconf_timer))
sctp_transport_put(t);
chunk->transport is assigned by __sctp_packet_append_chunk() when the
chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms
the reconf timer at that same point. A request already published i
sctp: fix stream->outcnt underflow on duplicate RECONF responses
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix stream->outcnt underflow on duplicate RECONF responses
A cached RECONF chunk may contain more than one request parameter. A
duplicate response can therefore find and process the same ADD_OUT request
again while another parameter is still outstanding, rolling back outcnt
twice and possibly underflowing it.
Track outstanding request types as bits and clear each bit after its first
response. Later responses for the same request are then ignored.
power: supply: bq24257: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work
power: supply: bq256xx: drain usb_work before freeing the charger
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: drain usb_work before freeing the charger
The USB-PHY notifier queues usb_work, whose handler calls
power_supply_changed(bq->charger). The reset devm action only unregisters
the notifier and was registered before the power supplies, so devm frees
bq->charger on unwind before the action runs; a usb_work still queued can
then dereference it.
Register the reset action after the power supplies, so it unregisters
the notifiers and drains usb_work before the supplies are released.
Initialize usb_work and obtain the PHY references before registering
the no
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25890: Fix power_supply reference leak
bq25890_fw_probe() acquires a reference to a secondary charger using
power_supply_get_by_name(), but the reference is not released on later
probe failures or on driver detach.
In particular, failures after bq25890_fw_probe() returns successfully,
such as a failure in bq25890_hw_init(), also leak the reference.
Register a device-managed cleanup action immediately after acquiring
the secondary charger. This releases the reference on all subsequent
probe failures and on driver detach.
Found by code review.
power: supply: charger-manager: register regulators before exposing sysfs
In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: register regulators before exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
power: supply: cros_usbpd-charger: bound the EC-reported port count
In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd-charger: bound the EC-reported port count
cros_usbpd_charger_probe() reads two port counts from the EC and uses
one of them, num_charger_ports, as the loop bound when populating a
fixed-size array:
struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */
...
for (i = 0; i < charger->num_charger_ports; i++)
charger->ports[charger->num_registered_psy++] = port;
Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports
(from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The
only validation is a sanity check that c