linux vulnerabilities · Page 16

Bluetooth: hci_conn: Lock parent access during enhanced SCO setup

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_loc

• Update to 6.12.113-1

Bluetooth: hci_core: Serialize ACL scheduling with channel deletion

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free i

• Update to 6.12.113-1

Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent()

• Update to 6.12.113-1

Bluetooth: hci_core: Serialize fragmented ISO packet queueing

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue.

• Update to 6.12.113-1

Bluetooth: btintel: fix buffer over-read in btintel_hw_error()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1.

• Update to 6.12.113-1

Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame() plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the "skb->len < plen" check and letting skb_trim() truncate the packet. Widen plen to u32 so the addition cannot wrap.

• Update to 6.12.113-1

Bluetooth: btintel_pcie: reject oversized TX packets in send_frame()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_frame() eventually copies skb->data into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended. A user-space process with HCI_CHANNEL_USER access can inject an oversized packet and overflow the buffer. Reject packets larger than BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry.

• Update to 6.12.113-1

tpm: fix off-by-four bounds check in tpm2_get_random()

In the Linux kernel, the following vulnerability has been resolved: tpm: fix off-by-four bounds check in tpm2_get_random() When the response carries the TPM2_ST_SESSIONS tag, tpm2_get_random() skips the 4-byte parameter size field before locating the random data, but the bounds check still validates the response length against TPM_HEADER_SIZE. A truncated response can pass the check and make memcpy() read up to 4 bytes past the response end, so stale buffer contents end up in the caller's random bytes. Fix this by checking the response length against 'offset', which already includes the skipped parameter size field.

• Update to 6.12.113-1

nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known

In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head is marked zoned at allocation time based only on the command set identifier. If the zone info query reports a zero zone size, the path namespace is registered without zoned limits while the head still advertises the zoned capability with a zone size of zero, and reporting zones or writing to the head then shifts by ilog2(0). Drop the zoned feature from the head allocation and let the head limits refresh stack it in from the path namespace instead.

• Update to 6.12.113-1

nvme-multipath: fix underflow in ANA log bounds checks

In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the re

• Update to 6.12.113-1

nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge()

In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge() nvmet_auth_challenge() receives its output buffer as a void pointer. sizeof(*d) therefore evaluates to one with GCC and undercounts the fixed challenge header by 15 bytes. A short AUTH_RECEIVE buffer can pass the check before the challenge is copied past the end of its allocation. Use the typed challenge pointer when calculating the response size. BUG: KASAN: slab-out-of-bounds in nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) Write of siz

• Update to 6.12.113-1

mtd: block2mtd: Fix divide error when erase_size is zero

In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+

• Update to 6.12.113-1

mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler.

• Update to 6.12.113-1

KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR.

• Update to 6.12.113-1

KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode

• Update to 6.12.113-1

KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information.

• Update to 6.12.113-1

KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_

KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails, because as per AMD: there's no explicit architectural guarantee about the behavior in the presence of VMRUN failures. So the best thing to do would be to assume that if VMRUN fails, the actions requested in the control fields may not have been performed.

KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT FGUs don't actually require hardware support, so don't gate fgt trap config insertion on FGT. This is the only action required to allow FGUs always, as kvm_calculate_traps() already computes the FGU bits with or without FEAT_FGT. This also fixes a spurious WARN when a TLBI OS is run on a guest in vEL1 without FEAT_TLBIOS on non FEAT_FGT hardware. In this configuration the course-grained HCR_EL2.TTLBOS trap reaches the handler handle_tlbi_el1(), which expects an EL1 TLBI only from vEL2. With FGUs enabled the UNDEF w

• Update to 6.12.113-1

wifi: cw1200: fix TX padding OOB read leaking heap data to device

In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_le

• Update to 6.12.113-1