linux vulnerabilities · Page 51

watchdog: msc313e: Avoid division by zero

In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic.

• Update to 6.12.111-1

watchdog: msc313e: Fix clock leak and spurious timer in settimeout()

In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running

• Update to 6.12.111-1

hwmon: (corsair-cpro) Create debugfs entries after hwmon registration

In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave the

• Update to 6.12.111-1

hwmon: (corsair-cpro) Remove debugfs entries when probe fails

In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through

• Update to 6.12.111-1

octeontx2-pf: reset HTB scheduler topology before freeing queues

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Sk

• Update to 6.12.111-1

vxlan: initialize _md in vxlan_xmit_one()

In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_

• Update to 6.12.111-1

ppp_synctty: ensure a writeable skb header

In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepending the address and control bytes, but does not ensure that the skb header is writable. A received skb can reach this function through PPP channel bridging without passing through ppp_start_xmit(), which calls skb_cow_head(). For example, a PPPoE frame may share its buffer with a clone queued to an AF_PACKET socket. If it is bridged to a synchronous tty channel, the address/control bytes can overwrite data still visible to that socket. Use skb_cow_head() to ensure both sufficient h

• Update to 6.12.111-1

net: stmmac: initialize ptp_lock at probe time

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: initialize ptp_lock at probe time priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs during __stmmac_open(). However, the lock is also used while the interface is down and has never been opened: tc_taprio_configure() invokes the PTP gettime64() callback to compute the EST base time when offloading a TAPRIO schedule, and stmmac_get_time() takes priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour. Move the rwlock_init() to __stmmac_dvr_probe(), together with the other private locks, so that ptp_lock is always valid regardless

• Update to 6.12.111-1

net/mlx5e: Move representor vnic reporter to eswitch devlink port

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted

perf/core: Allow list_del during perf_event_overflow()

In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow()

• Update to 6.12.111-1

perf/x86/intel: Prevent drain_pebs() reentry

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still

net/sched: cls_route: free emptied bucket on filter move

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: free emptied bucket on filter move route4_change can move an existing filter to a different top-level bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/ FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so for an existing filter the new handle may differ from the old one and land in a different bucket. When this happens, the filter is unlinked from the old bucket, but the bucket itself is never freed once it goes empty. The stale empty bucket remains in head->table[], causing route4_delete to report *last=false even af

• Update to 6.12.111-1

net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the lab

• Update to 6.12.111-1

net: hinic: fix mailbox segment buffer overflow

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remainin

• Update to 6.12.111-1

net/rds: fix tcp stream corruption with large pages

In the Linux kernel, the following vulnerability has been resolved: net/rds: fix tcp stream corruption with large pages rds_message_map_pages() assigns PAGE_SIZE bytes to every scatterlist entry, even when total_len ends in a partial page. The RDS congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE greater than 8192 the scatterlist maps bytes beyond the end of the congestion map. RDS-TCP transmits the SG contents according to those lengths, so the extra bytes become part of the TCP RDS stream and are interpreted as subsequent RDS message headers, corrupting the stream. Limit the final scatterlist mapping to the number of

• Update to 6.12.111-1

net: stmmac: fix TX descriptor availability check for TSO traffic

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS

• Update to 6.12.111-1

sunvdc: unmap LDC cookies when the descriptor send fails

In the Linux kernel, the following vulnerability has been resolved: sunvdc: unmap LDC cookies when the descriptor send fails __send_request() maps the request's pages into the LDC channel's map table (ldc_map_sg()), fills in the descriptor and marks it VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger(). When the trigger fails, the error path only prints a message: the descriptor stays READY and the cookies are never unmapped. The mapping is normally released in vdc_end_one() when the peer completes the descriptor - but a descriptor whose doorbell was never sent will never complete, and since dr->prod is not advanced on failur

• Update to 6.12.111-1

scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands When a LUN_RESET aborts a WRITE command that is in the TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and waits for the frontend to finish processing. If the initiator subsequently sends the remaining dataout PDUs, __iscsit_check_dataout_hdr() catches the payload, stops the dataout timer if the sequence is final and finally dumps the data. However, the iSCSI target doesn't trigger the completion process for these aborted commands. Because of this, the abort path hangs indefinitely in targe

• Update to 6.12.111-1

configfs: pin the symlink target's dirent instead of chasing ->ci_dentry

In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reads the target's configfs_dirent from item->ci_dentry->d_fsdata, relying on the item reference taken by get_target(). That reference pins the item, not its dentry: the dentry is pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via simple_rmdir() while the item is still alive. A symlink racing with rmdir of its target can therefore find ->ci_dentry freed and its dirent released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get(). Take the dirent in get_t

• Update to 6.12.113-1

configfs: unhash the dentry before dropping the item in rmdir

In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline

• Update to 6.12.113-1