linux vulnerabilities · Page 71

platform/x86: lg-laptop: Fix LED resource handling

In the Linux kernel, the following vulnerability has been resolved: platform/x86: lg-laptop: Fix LED resource handling The event notification callback might access kbd_backlight even when it was not successfully registered with the LED subsystem. The same happens inside acpi_remove(), where the LED devices are unregistered unconditionally. Fix this by tracking the availability of the kbd_backlight LED device and use devm_led_classdev_register() to let devres take care of unregistering the LED devices during removal. For this the parent device of the LED devices is changed to the native platform device.

• Update to 6.12.111-1

remoteproc: qcom_q6v5_adsp: Fix reference leak for device node

In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_q6v5_adsp: Fix reference leak for device node When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In adsp_map_carveout, it does not release the reference.

• Update to 6.12.111-1

bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max check_kfunc_args() detects a kfunc argument named rdonly_buf_size or rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64, and does not bound it. check_kfunc_call() later copies that value into the returned register's mem_size field: meta->r0_size = reg->var_off.value; ... regs[BPF_REG_0].mem_size = meta.r0_size; regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set gets truncated instead of causing a load-time rejection, so the verifier records a PTR_TO_MEM regis

serial: qcom-geni: do not advance stale DMA completions

In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: do not advance stale DMA completions The qcom GENI serial DMA TX completion path advances the transmit fifo by the number of bytes recorded in port->tx_remaining. If uart_flush_buffer() runs after the hardware has completed a DMA transfer but before the DMA completion interrupt has been handled, the serial core resets the transmit fifo while port->tx_remaining still describes the old DMA transfer. A previous fix avoided advancing an empty fifo by checking that the fifo length is at least tx_remaining. That still does not distinguish the old DMA payload

• Update to 6.12.111-1

usb: gadget: uac: validate rate list length before storing

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UA

usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which calls dma_fence_put() on the fence. However, at that point the fence has only been kmalloc'd — dma_fence_init() has not been called yet, so the refcount and the fence ops are uninitialized. Calling dma_fence_put() on such an object leads to undefined behavior. Use kfree() instead, since the fence is just a plain allocation at this stage, and rename the label t

• Update to 6.12.111-1

usb: gadget: configfs: fix out-of-bounds read of qw_sign

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: fix out-of-bounds read of qw_sign os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input length to utf16s_to_utf8s(), but that argument counts UTF-16 code units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[]. The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the conversion reads up to 7 units (14 bytes) past the end of qw_sign[] into the following members of struct gadget_info when the stored signature fills the array without a NUL terminator, exposing those bytes through the configfs attribute. The store pat

• Update to 6.12.111-1

usb: ljca: bound bank_num in ljca_enumerate_gpio()

In the Linux kernel, the following vulnerability has been resolved: usb: ljca: bound bank_num in ljca_enumerate_gpio() ljca_enumerate_gpio() reads desc->bank_num from the device and loops valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[] holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries. Two checks run before the loop. The reply length must match struct_size(desc, bank_desc, bank_num). The product pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one bounds bank_num against the size of valid_pin[]. The reply is capped at LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits bank_num to 9. A devi

• Update to 6.12.111-1

usb: gadget: aspeed_udc: check endpoint DMA allocation

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed_udc: check endpoint DMA allocation ast_udc_probe() allocates a coherent DMA buffer used as the backing store for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer pointers from udc->ep0_buf, so a failed allocation is dereferenced during probe. Check the allocation before endpoint setup. The existing probe error path called ast_udc_remove(), which unregisters the gadget unconditionally and is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup helper for probe failures so pre-registration failures only unwind the resources th

• Update to 6.12.111-1

usb: fix UAF when probe runs concurrent to dyn ID removal

In the Linux kernel, the following vulnerability has been resolved: usb: fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held, as remove_id_store can free the node. Thus, make a copy in usb_probe_interface. Clarify the documentation that the id parameter is only valid during the probe. USB serial has the same pattern, but it does not need fixing as the IDs cannot be removed via sysfs.

• Update to 6.12.111-1

platform/x86: asus-wmi: fix resource leaks on probe failure

In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix resource leaks on probe failure During driver initialization in asus_wmi_add(), various subsystems are registered sequentially. However, the error path labels are out of order relative to the registration sequence. Specifically: 1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to fail_custom_fan_curve. Because this label is placed below fail_sysfs, it bypasses the cleanup calls for the input device and sysfs groups, which were successfully registered before, leaking those resources. 2. If asus_screenpad_init() fails, the d

platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL

In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to acpi_device_hid(), which dereferences it, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. Accordingly, add a requisite ACPI_COMPANION() check again

• Update to 6.12.111-1

platform/surface: acpi-notify: Check ACPI companion before use

In the Linux kernel, the following vulnerability has been resolved: platform/surface: acpi-notify: Check ACPI companion before use Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. san_probe() dereferences the result of ACPI_COMPANION() when installing the GSBUS address space handler, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. The dereference was introduced when the probe function

• Update to 6.12.111-1

clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK With the introduction of sync_state support in the clk and pmdomain subsystems, the following warning happens when the unused clocks are shutdown in camcc-sc8280xp: [ 15.408367] titan_top_gdsc status stuck at 'on' [ 15.408429] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x14c/0x160, CPU#2: kworker/u32:1/14 [ 15.408462] Modules linked in: bnep vfat fat ath11k_pci(+) ath11k mac80211 cfg80211 mhi libarc4 snd_soc_wcd938x snd_soc_wcd938x_sdw snd_soc_wcd_classh hci_uart snd_soc_wcd_common sn

• Update to 6.12.111-1

RDMA/core: Wait for RCU callbacks before unloading ib_core

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with call_rcu() and implemented in ib_core. Stopping the workqueues does not drain callbacks already queued, so RCU could invoke it after the module code has been unloaded. synchronize_rcu() does not wait for callbacks. Wait for them after all producers have stopped.

• Update to 6.12.111-1

RDMA/mlx5: Drain RCU callbacks during module teardown

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain queued after the last DevX event file drops its module reference or an auxiliary driver detaches its devices. mlx5_ib can then unload before the callback runs. Registration error unwind has the same risk because driver registration can attach existing devices before failing. Wait after all drivers have stopped.

• Update to 6.12.111-1

RDMA/ipoib: Drain RCU callbacks during module teardown

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can be signaled from inside an RCU callback. Teardown can wake before the callback returns and unload ib_ipoib while its code is still executing. Client registration failure can also remove already-added devices and queue callbacks. Wait after client and workqueue teardown.

• Update to 6.12.111-1

RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state When do_complete() finds the QP in the error state it returns RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup reset state handling in rxe_resp.c") this was the flush loop: check_resource() had an error-state branch that fetched each remaining recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching the current packet. That commit removed the error-state branch from check_resource() (draining is now done at rxe_receiver() entry) but kept the do_complete() erro

• Update to 6.12.111-1

esp: do not unref managed frag pages in esp_ssg_unref()

In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page references held on the source scatterlist after the AEAD operation completes. It calls skb_page_unref() on every frag page for an out-of-place transform (req->src != req->dst), and in the error path of esp_output_tail() (already_unref == true) on the request's own scatterlist. This is wrong when the skb carries managed frags (SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf and the skb does not hold a per-frag page reference; io_uring SEND_ZC with a registered bu

RDMA/rvt: Return NULL after port allocation failure

In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure.