linux vulnerabilities · Page 73

irqchip/renesas-irqc: Fix generic interrupt chip leak on remove

In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-irqc: Fix generic interrupt chip leak on remove The driver allocates domain generic chips probe. However, on driver removal, the generic chips are not automatically freed when the interrupt domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, pote

• Update to 6.12.111-1

media: bcm2835-unicam: Fix asc leaked in error/remove path

In the Linux kernel, the following vulnerability has been resolved: media: bcm2835-unicam: Fix asc leaked in error/remove path v4l2_async_nf_add_fwnode_remote() allocates the asc, which is freed when v4l2_async_nf_cleanup() is called. Call v4l2_async_nf_cleanup() properly in the driver paths. Discovered with kmemleak after rmmod: unreferenced object 0xffff000084526b80 (size 64): comm "modprobe", pid 185, jiffies 4295013512 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 e8 0d ff bf 00 00 ff ff ................ 40 83 bc 84 00 00 ff ff 60 83 bc 84 00 00 ff ff @.......`....... backtrace (crc ac584083): [<00000000ffb08

• Update to 6.12.111-1

media: ipu6: Do not free aux device pdata after init

In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Do not free aux device pdata after init ipu6_bus_initialize_device() stores the isys/psys pdata pointer in struct ipu6_bus_device and initializes the auxiliary device. After that point, error unwinding must drop the auxiliary device reference and let ipu6_bus_release() free both the bus device and adev->pdata. The isys and psys init paths already call put_device() when MMU initialization fails, and ipu6_bus_add_device() calls auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths therefore run the bus release callback. The extra kfree(pdata) i

• Update to 6.12.111-1

drm/bridge: tc358767: clamp the reported AUX read size to the request

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clamps an AUX read to the payload limit: size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size); After the transfer it replaces size with the byte count the controller reports in AUX_BYTES: if (size) size = FIELD_GET(AUX_BYTES, auxstatus); AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it back to the request. tc_aux_read_data() reads that many bytes into the 16-byte auxrdata stack buffer, then copies them into the caller buffer. A reported count

• Update to 6.12.111-1

wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was declared as u8 while num_pc is u32. If firmware advertises more than 255 PC entries the counter wraps back to zero and the loop never terminates potentially causing an infinite loop or reading past the allocated pc_data array. Change the declaration to u32 to match num_pc.

• Update to 6.12.111-1

wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser iwl_mvm_frob_txf_key_iter() tracks the last matched byte position in loop variable 'i'. When a full key match is found (match == keylen), 'i' points at the last byte of the matched key. The memset start offset should therefore be i + 1 - keylen, not i - keylen; the current code zeroes one byte before the match and leaves the final key byte un-sanitised.

• Update to 6.12.111-1

wifi: iwlwifi: mei: check SAP message length before reading it

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message size is not larger than the local buffer before reading the message to avoid buffer overflow.

• Update to 6.12.111-1

wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we don't end-up with a num_frags = 0 situation. For that, check that the required size is not 0 and put a checker on num_frags as well.

• Update to 6.12.111-1

gpu: host1x: Avoid stack over-read in debug output helpers

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which returns the length the formatted string would have reached with an unbounded buffer. That return value was passed straight to o->fn as the number of bytes to emit. This could cause a read past end of the output buffer if a call to host1x_debug_* produced a string longer than 256 bytes. This only affected the debugfs files as the printk debug sink ignores the number of bytes. In practice, this is very unlikely to occur. Fix by switching to vscnpr

• Update to 6.12.111-1

drm/msm: Only fini scheduler after successful init

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and conf

usb: gadget: f_uac1_legacy: remove broken string configfs attributes

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: remove broken string configfs attributes The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for the fn_play, fn_cap, and fn_cntl string options. The store function contains an inverted null check on the kstrndup() return value. This means every write attempt returns -ENOMEM on success and dereferences a NULL pointer on allocation failure. The attributes have been broken and unused for many years. Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE,

• Update to 6.12.111-1

UDF symlink pathComponent header OOB read

In the Linux kernel, the following vulnerability has been resolved: UDF symlink pathComponent header OOB read udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header. Validate that enough input remains for a complete pathComponent header before accessing it. Reject malformed symlink data that would otherwise make udf_pc_to_char() perform an out-of-bounds read.

• Update to 6.12.111-1

uio: Fix stale info pointer in failed registration path

In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO device is visible to userspace and /dev/uioX can be opened. If a later setup step fails, __uio_register_device() unwinds the device but leaves idev->info pointing at the caller-owned struct uio_info. That is unsafe when an opener races with the failed registration path. The open file keeps a reference to the uio_device, while the caller sees registration failure and may free its struct uio_info. Later file operations can then follow idev->info and dereference freed memory. Handle post-devi

• Update to 6.12.111-1

speakup: keyhelp: guard letter_offsets possible out-of-range indexing

In the Linux kernel, the following vulnerability has been resolved: speakup: keyhelp: guard letter_offsets possible out-of-range indexing help_init() builds letter_offsets[] by using the first byte of each function name as an index via `(start & 31) - 1`. If function_names are overridden from sysfs (root) with a name starting outside [a–z], the index underflows or exceeds the array, leading to OOB write. Function names can be overridden with the following commands as root: modprobe speakup_soft echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names # then press Insert+2 on /dev/tty This fix checks the first letter in

• Update to 6.12.111-1

misc: bcm-vk: Use acquire/release for msgq_inited

In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queue information and then sets msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the message queues and their cached queue information. atomic_set()/atomic_read() do not order those accesses. A reader can see msgq_inited set while still seeing stale queue information. Use release when publishing the initialized queues and acquire when checking the gate. Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the gate and does not publish queue state to read

• Update to 6.12.111-1

misc: ad525x_dpot: use driver core groups for sysfs files

In the Linux kernel, the following vulnerability has been resolved: misc: ad525x_dpot: use driver core groups for sysfs files ad_dpot_probe() creates per-RDAC sysfs files manually and then optionally creates the command sysfs group. This leaves probe responsible for rolling back partial sysfs state and makes remove responsible for matching every file that probe created. Move the device attributes into driver core dev_groups for the I2C and SPI drivers and use an is_visible() callback to expose only the attributes supported by the probed device. With this shape, the driver core creates the sysfs files only after probe succeeds and removes t

• Update to 6.12.111-1

ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove

In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove Three issues arise when the device is removed while a tty session is still active: 1. UAF of struct ipoctal: the remove callback frees ipoctal via kfree() while tty ops may still access it. Fix by introducing kref-based lifetime management — kref is taken in install() when a tty is opened and released in cleanup() when the tty is finally destroyed; remove() uses kref_put() instead of kfree(). 2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove() frees xmit_buf via tty

• Update to 6.12.111-1

mtd: mtdswap: Avoid freeing registered blktrans device twice

In the Linux kernel, the following vulnerability has been resolved: mtd: mtdswap: Avoid freeing registered blktrans device twice In mtdswap_add_mtd(), debugfs setup failure after successful blktrans registration can free mbd_dev twice. add_mtd_blktrans_dev() initializes the blktrans device reference and publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the disk down and drops the blktrans reference; when that reference reaches zero, blktrans_dev_release() frees the mtd_blktrans_dev. The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell through the common cleanup label and called kfree(mbd_dev) again.

• Update to 6.12.111-1

mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()

In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPA

• Update to 6.12.111-1

drm/v3d: Associate BOs with every job that accesses them

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Associate BOs with every job that accesses them A submission can expand into a chain of jobs (e.g. bin + render + cache clean). Implicit synchronization in v3d_submit_lock_reservations() is gated on each job's bo[], but the BO list was only ever attached to the last job of the chain. When that last job is a trailing CACHE_CLEAN job, the job that actually consumes the BOs (that is, a RENDER or CSD job) was left with bo_count == 0 and picked up no implicit dependencies. It could therefore be dispatched to the hardware and read a BO while another context was still wri