linux vulnerabilities · Page 85

ASoC: xilinx: formatter_pcm: fix stream_data leak on open error

In the Linux kernel, the following vulnerability has been resolved: ASoC: xilinx: formatter_pcm: fix stream_data leak on open error In xlnx_formatter_pcm_open(), stream_data is allocated and adata->play_stream or adata->capture_stream is assigned early. If a later step, such as snd_pcm_hw_constraint_step() or snd_pcm_hw_constraint_integer(), fails, the function returns the error immediately. ALSA does not call the close callback when open fails, so stream_data is leaked and the stream pointer is left dangling, pointing to a substream that ALSA frees. A later interrupt would then call snd_pcm_period_elapsed() on the freed substream. Free

• Update to 6.12.111-1

firewire: core: fix memory leak in error path of build_tree()

In the Linux kernel, the following vulnerability has been resolved: firewire: core: fix memory leak in error path of build_tree() In the error path of build_tree(), node instances can remain in the local linked list when the function returns. Whenever an invalid value is detected in the self ID sequence, each allocated node instance is either an entry in the linked list or an entry in the ports array of its parent node. Therefore, the allocate node instances can be safely released by traversing the linked list from its head. Release the remaining node instances with for_each_fw_node() before returning to the caller.

• Update to 6.12.111-1

bpf, s390: Clear fetch destination on faulting arena atomic

In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Clear fetch destination on faulting arena atomic Same missing register clear as on riscv64. A RMW atomic on an arena pointer is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but bpf_jit_probe_atomic_pre() only fills in the arena base and the probe offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads back as "there is nothing to clear". That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory, but an RMW carrying BPF_FETCH also reads

s390/debug: Fix deadlock during unregister

In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one of the associated debugfs files is being written to can cause a deadlock: $ echo >.../vmur/level $ rmmod vmur =================================================== debugfs write debugfs_file_get() debug_unregister() mutex_lock(debug_mutex) debugfs_remove() wait for debugfs_file_put() debug_file_ops.write() debug_input() mutex_lock(debug_mutex) ==> DEADLOCK Fix this by splitting deb

• Update to 6.12.111-1

clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type

In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type Samsung PWM timer might be used as a clock source on some legacy systems. When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a sleeping lock (mutex-based), which must not be used in atomic context such as hard interrupt handlers. Switch the samsung_pwm_lock to the raw_spinlock, which remains a true non-sleeping spinlock even under PREEMPT_RT.

ALSA: seq: midi: Serialize input teardown with event_input

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize input teardown with event_input snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event l

• Update to 6.12.111-1

nvmet: fix max_qid race between configfs and controller allocation

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix max_qid race between configfs and controller allocation The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it has

ocfs2: validate orphan slot during inode read

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation b

ocfs2: validate DIO orphan slot during inode read

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:11

Squashfs: check block offset is not negative

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user ca

• Update to 6.12.111-1

scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers _base_release_memory_pools() unconditionally frees every ioc->pcie_sg_lookup[] entry, including ones the setup loop never allocated after a partial failure, causing a "bad dma" warning on debug kernels or a NULL pointer dereference otherwise.

• Update to 6.12.111-1

net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race

In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race This bug was discovered while testing the hns3 driver under channel reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on arm64. The race is intermittently triggered when page_pool_destroy() runs page_pool_scrub() concurrently with page return via page_pool_put_netmem() on a different CPU. A WARN in page_pool_clear_pp_info() surfaced the dangling DMA index bits left by the cmpxchg loser, which led to the investigation. page_pool_scrub() iterates pool->dma_mapped via xa_for_each() wi

• Update to 6.12.111-1

fs/ntfs3: fix integer overflow in MFT cluster validation

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix integer overflow in MFT cluster validation In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are validated against the volume size with: if (mlcn * sct_per_clst >= sectors || mlcn2 * sct_per_clst >= sectors) goto out; mlcn and mlcn2 are u64 fields read directly from the boot sector. sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus the is_power_of_2() check below it), but the multiplication is done in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn near 2^62 with sct_per_clst == 4 wraps to 0, which com

• Update to 6.12.111-1

fs/ntfs3: reject out-of-range evcn in mi_enum_attr()

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject out-of-range evcn in mi_enum_attr() In mi_enum_attr(), the start/end VCN validation for non-resident attributes is: if (svcn > evcn + 1) goto out; When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn passes the check. For evcn values close to U64_MAX (but not equal to it) the right-hand side is still a meaningless near-wrap upper bound, so a malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass mi_enum_attr() unrejected. VCN (virtual cluster number) is a cluster index, so any valid evcn is bounded by the volume's to

• Update to 6.12.111-1

ALSA: core: Fix use-after-free in snd_card_do_free()

In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix use-after-free in snd_card_do_free() A use-after-free was detected in snd_card_do_free() when a sound card managed by devres is unbound while a user-space application still holds an open file descriptor. For managed cards, the memory is allocated using devres_alloc(), and its release function is set to __snd_card_release(), which calls snd_card_free(). When the device is unbound, the unbind thread calls snd_card_free(), which drops a reference to the card's device. If the user thread still has an open file descriptor, the reference count does not reach zero

• Update to 6.12.111-1

ASoC: SOF: validate topology volume range before allocation

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: validate topology volume range before allocation SOF treats the topology mixer min and max values as non-negative indices into its volume table. It stores them in signed fields, allocates max + 1 entries through an int argument, and later indexes the table with the stored range. An inverted range is invalid, while a maximum at or above INT_MAX cannot be represented safely after the increment or in the signed fields. Validate the complete range before storing it or allocating the table.

• Update to 6.12.111-1

riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args

In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix missing sign-ext for signed 1-byte and 2-byte kfunc args On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc args. However, the RV64 JIT currently does not perform sign-extension for such kfunc args. Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register liveness analysis"), state pruning could potentially omit zero-extension of 32-bit subregisters, which inadvertently masked the above issue by making the args appear as if they had been properly sign-extended. After that commit, the problem is exposed, causing the

• Update to 6.12.111-1

ACPI: scan: fix bus ID cleanup on device_add() failures

In the Linux kernel, the following vulnerability has been resolved: ACPI: scan: fix bus ID cleanup on device_add() failures When device_add() fails after acpi_device_set_name() has allocated an instance ID and a new acpi_device_bus_id has been linked into acpi_bus_id_list, the rollback path only removes wakeup_list and detaches the ACPI handle data. That leaves the bus-ID bookkeeping behind and keeps the allocated instance number consumed. Move the bus-ID cleanup and wakeup-list removal into a single helper. Use it from both the normal device teardown path and the device_add() rollback path. The wakeup list node is initialized before reg

• Update to 6.12.111-1

mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler

In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler qcom_cpucp_mbox_irq_fn() calls mbox_chan_received_data() while holding chan->lock. Under PREEMPT_RT, spin_lock_irqsave() is converted to an rt_spinlock (rtmutex-based), which tracks ownership and can sleep. The callback chain triggered by mbox_chan_received_data() eventually reaches mailbox_clear_channel() -> mbox_send_message() -> add_to_rbuf(), which attempts to re-acquire the same chan->lock. Since rtmutex detects the re-entrant lock attempt by the same owner, the thread blocks waiting for a lock it alread

• Update to 6.12.111-1

mailbox: qcom-cpucp: handle NULL data in send_data callback

In the Linux kernel, the following vulnerability has been resolved: mailbox: qcom-cpucp: handle NULL data in send_data callback mailbox_clear_channel() calls mbox_send_message() with NULL data to notify the remote side that the RX channel has been cleared. qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer, causing a NULL pointer dereference kernel panic when invoked from this path under PREEMPT_RT. Add an explicit NULL check and return early without writing to the TX register, which is the correct behaviour for a channel-clear notification.

• Update to 6.12.111-1