drm/ttm: Drop tt->restore after successful restore
In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x3
drm/amdgpu: clamp the isolation index for rings outside a partition
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: clamp the isolation index for rings outside a partition
adev->isolation[] has one slot per partition, but a ring that is not
assigned to one keeps AMDGPU_XCP_NO_PARTITION, which is ~0, so indexing
the array with it is out of bounds. SDMA submissions hit this on both
the isolation enforcement and the VM flush path and trip UBSAN.
Fall back to the first slot the way the cleaner shader path already
does, and stop taking the address before the ring type check that makes
it relevant.
drm/amdgpu: force complete the KIQ ring fences on reset
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the KIQ ring fences on reset
Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a
polling fence, so it is skipped by the force-completion loop in
amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and
survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a
reset the first KIQ submission can poll forever on a seq that is never written
back.
Force complete the KIQ ring fences too so their hw fence is realigned to
sync_seq.
drm/amdgpu: force complete the MES ring fences on reset
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
wri
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
If page migration from device to sys ram fails for some reasons driver needs
release and unlock allocated system pages. To do that driver should use page
physical address, or pfn, then get struct page*. Current driver uses dma
address(for adev) that is not correct with IOMMU enabled, or even in general.
The patch releases and unlocks allocated system pages based on where migration
failed by struct page* of sys ram pages. Also dma_unmap correspodent system
ram pages at error path.
drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds
Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD
queue triggers a NULL pointer dereference because the for loop that
calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the
if (pqn->q) block that initializes mqd_mgr.
The queue list can contain entries where pqn->q is NULL (kernel queues
where only pqn->kq is valid). In the original code:
if (pqn->q) {
...
mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type];
size = mqd_mgr->mqd_stride(...);
}
for (xcc = 0; x
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set +
MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no
dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart()
will return an uninitialized r. That can trigger out_free_vram_pages to drop
all VRAM just set up.
Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0.
Current code postponed the last page to the final copy. This patch flushes on
the last page when reach to t
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
Both create_queue_cpsch() and create_queue_nocpsch() unconditionally
call mqd_mgr->restore_mqd() when a CRIU restore is in progress
(qd != NULL), with no NULL guard. On any system where restore_mqd is
not implemented for the given queue type, a user holding
CAP_CHECKPOINT_RESTORE can trigger a kernel NULL pointer dereference
and panic the machine by issuing KFD_IOC_CRIU_OP_RESTORE with a
crafted queue restore object. Note that checkpoint_mqd is likewise
unimplemented on GFX12, so no legitimate CRIU image can r
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c.
drm/pagemap: Fix folio allocation fallback and use-after-put
In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Fix folio allocation fallback and use-after-put
drm_pagemap_migrate_populate_ram_pfn() had two issues when populating
RAM PFNs with higher-order folios:
1. The higher-order vma_alloc_folio()/folio_alloc() calls did not pass
__GFP_NOWARN, so a THP allocation failure under memory pressure
would spam the kernel log, and there was no fallback path despite a
TODO comment stating one was needed. Add __GFP_NOWARN to the
higher-order allocation and, on failure, fall back to order-0
allocations for the entire range originally covered by the failed
hig
drm/nouveau/dmem: fix mismatched DMA unmap size for large folios
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix mismatched DMA unmap size for large folios
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migr
drm/nouveau: unsubscribe the channel-kill event before the fence context
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: unsubscribe the channel-kill event before the fence context
nouveau_channel_del() tears the fence context down first and only drops
the channel-kill subscription later, in the middle of the nvif object
teardown:
if (chan->fence)
nouveau_fence(chan->cli->drm)->context_del(chan);
...
nvif_object_dtor(&chan->vram);
nvif_event_dtor(&chan->kill);
The subscribed handler is nouveau_channel_killed(), which calls
nouveau_channel_kill() and from there nouveau_fence_context_kill() on
chan->fence. A kill event delivered in that window takes fctx->lock and
walks fct
drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix NULL deref unwinding an OP_MAP_SPARSE op
Each bind_job_op is zeroed by kzalloc_obj() in bind_job_op_from_uop(),
and the OP_MAP_SPARSE case in nouveau_uvmm_bind_job_submit() only creates
a region, so op->ops stays NULL for a successfully processed sparse map.
If a later op in the same job fails, the reverse unwind loop revisits that
op and calls drm_gpuva_ops_free(&uvmm->base, op->ops) unconditionally.
drm_gpuva_ops_free() dereferences its argument right away
(list_for_each_entry_safe on &ops->list), so a NULL op->ops oopses. The
path is reachable by a
drm/nouveau/uvmm: fix premature region free on failed OP_UNMAP_SPARSE
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix premature region free on failed OP_UNMAP_SPARSE
In nouveau_uvmm_bind_job_submit()'s OP_UNMAP_SPARSE arm, op->reg is set
from nouveau_uvma_region_find(), which only looks the region up and takes
no reference; a region's sole reference is its membership in
uvmm->region_mt. Two failure paths leave op->reg set: the -ENOENT check
when the region is busy, and the drm_gpuvm_sm_unmap_ops_create() failure.
The sibling nouveau_uvmm_sm_unmap_prepare() failure just below clears
op->reg; these two do not.
unwind_continue steps back one op, so the failing op is ski
drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE
A successful OP_UNMAP_SPARSE marks its region dirty with
nouveau_uvma_region_dirty() and defers the teardown to
nouveau_uvmm_bind_job_cleanup(); it does not remove the region from
uvmm->region_mt.
If a later op in the job fails, the unwind path never clears reg->dirty
(set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup
skips the teardown. The region is left in the tree with dirty set and its
completion never signalled. Later binds over that range then fail
permanently -- -ENOENT or
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled.
rpcrdma: arm rn_done before publishing the notification
In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray
power: supply: ab8500_fg: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500_fg: fix use-after-free on remove
ab8500_fg_remove() destroys the driver workqueue while the threaded
interrupt handlers are still armed; they are devm-managed and freed
only after ->remove() returns, so a handler that fires in that
window queues work on the freed workqueue.
Tear the workqueue down through devm instead, registering its cleanup
after the power supply and before the interrupt requests. devm then
frees the interrupts first, so the handlers can no longer queue work,
before disabling the delayed and plain work items and destroying the
work
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: avoid infinite kdamond_merge_regions() internal loop
Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and
races", v1.1.
Sashiko found a few issues in DAMON that could cause infinite loop, NULL
dereference and monitoring results degradation. The first two sounds
scary but the infinite loop happens only under unreasonable user setup.
The NULL dereference is only in a unit test. Monitoring results
degradation is trivial since it is only best-effort, and those happens
from only unlikely races. Still those are bugs that better to fix if
p