scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task
and copies the PDU's data segment into that command's scatterlist without
asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same
file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.
A target that answers a WRITE command's ITT with a Data-In therefore has
the initiator write target-supplied bytes into the pages that write was
about to send. Those are the caller's own pinned pages for an O_DIRECT
write,
scsi: ufs: core: Keep internal commands dispatchable during error handling
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Keep internal commands dispatchable during error handling
Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
switched UFS internal commands to allocate requests on
hba->host->pseudo_sdev->request_queue, which shares the host tagset with
regular LUNs.
During error recovery, ufshcd_err_handling_prepare() calls
blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the
tagset as quiesced, including pseudo_sdev->request_queue. When
ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP
OUT UPIU) via blk_exec
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and
cpc->task_epc is only non-NULL while a task context is scheduled in on
this CPU. __perf_pmu_sched_task() therefore always passes NULL:
Unable to handle kernel NULL pointer dereference at virtual address 00
pc : armv8pmu_sched_task+0x14/0x50
Call trace:
armv8pmu_sched_task+0x14/0x50 (P)
perf_pmu_sched_task+0xac/0x108
__perf_event_task_sched_out+0x6c/0xe0
Pass &cpc->epc instead, the CPU-wide context for this PMU, which the
function alr
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix NULL pointer dereference in ccw_device_get_util_str()
The channel path registry entry associated with a CHPID may be removed
while the subchannel's PMCW still references that CHPID. In this case,
chpid_to_chp() can return NULL, leading to a NULL pointer dereference.
Add the missing NULL check before dereferencing the returned pointer.
s390/cmf: Fix virtual vs physical address confusion
In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y.
s390/pci: Fix missing device lock in zpci_report_status()
In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix missing device lock in zpci_report_status()
When pdev is non-NULL, zpci_report_status() accesses the device's driver.
To get a consistent state matching the recovery, the device lock needs to
be held. Do so by expanding the existing device lock critical section.
The lock only needs to be held when the pdev is non-NULL, so extract
the pdev-specific reporting into a helper function which also adds a
lockdep assertion to detect calls without the device lock held.
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
Three related problems exist in the handling of KVM interrupt and page
resources when a queue is removed from the host's AP configuration
while assigned to a mediated device (mdev).
Problem 1:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue()
When the AP bus removes a queue device whose adapter or domain has
been removed from the host's AP configuration,
vfio_ap_mdev_remove_queue() is called. If the queue is still in the
host's AP configuration at that point, it calls
vf
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also no
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Do cache maintenance on the source VM during intra-host migration
Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed. Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.
Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't
find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls
it for every number the generic code doesn't handle, so
ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it
under panic_on_warn. The lookup is fed userspace input: return false,
and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that
number on a host without pKVM.
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior.
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix spurious warning for benign stage 2 teardown race
kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an
L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB
of RAM, all of which was then exited.
Under memory pressure in the L0 host warnings were observed due to
migration triggered by compaction:
WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80,
CPU#5: kcompactd0/66
Which was, in turn, triggered by an MMU notifier for the host invalidation:
mmu_notifier_invalidate_range_start()
-> ... -> kvm
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race
Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU
notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap()
and kvm_nested_s2_wp().
However at the point of this being performed concurrent stage 2 teardown of
a nested guest can cause kvm->arch.mmu.pgt to be set to NULL.
This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() ->
kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock.
Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow s
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Transfer the hyp stack pages out of the host stage-2
fix_host_ownership() walks only the linear-map alias of each memblock
region, and the per-CPU hyp stack, mapped in the private VA range for
its guard page, has none.
Walk each stack's VA range with the same walker.
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
t
RISC-V: KVM: Synchronize hrtimer callback during teardown
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Synchronize hrtimer callback during teardown
The non-Sstc hrtimer callback clears next_set before its final uses of
the enclosing vCPU. If teardown observes next_set as false while the
callback is still running, kvm_riscv_vcpu_timer_cancel() skips
hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the
callback enters kvm_riscv_vcpu_set_interrupt().
A guest can arm the timer with SBI TIME and request shutdown with SBI
legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and
destroys the VM supplies the teardown side of the race; no
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a lo
Bluetooth: hci_conn: fix CIS hold ownership on reuse
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix CIS hold ownership on reuse
Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via
hci_conn") made hci_bind_cis() and hci_connect_cis() return a
connection with one hold for the ISO layer. hci_bind_cis() currently
takes that hold only after configuring a CIS, so its BT_CONNECTED and
matching BT_BOUND paths return a bare lookup result. Its configuration
failure path can likewise call hci_conn_drop() before taking a hold.
Take the hold before any state-dependent return or configuration error
so every successful return follows the docume
Bluetooth: hci_sock: validate event length before filtering
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: validate event length before filtering
is_filtered_packet() reads the event code from skb->data[0] without first
checking that the skb is nonempty. When an opcode filter is configured,
it also reads the command opcode at offsets 3 or 4 without checking that
a Command Complete or Command Status event is long enough.
hci_send_to_sock() invokes the filter before hci_event_packet() validates
the event header. A malformed event supplied by a controller or a vhci
device can therefore cause an out-of-bounds read.
Keep the unmasked event code for the opcode c
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: reject out-of-range OCF values
The raw HCI socket security filter has 128 OCF bits per supported OGF,
but masks the 10-bit OCF with 127 before looking up the command. An
unprivileged socket can therefore submit a reserved OCF that aliases an
allowlisted command modulo 128.
A conforming controller should reject reserved opcodes. Nevertheless,
the security decision must apply to the opcode that will actually be
sent, especially since controller-specific behavior is outside the host
stack's control.
Reject OCF values that cannot be represented by the sec