PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux in the last 30 days: 1050. Listed in the KEV catalogue: 0.
Vulnerabilities: 20122
In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_refcount field as unique BPF_REFCOUNT is not marked as a unique field, while it should be. Fix this oversight.
In the Linux kernel, the following vulnerability has been resolved: ext4: fix transaction overflow during writeback Commit 95ad8ee45cdb ("ext4: correct the reserved credits for extent conversion") was correct to note that we need to reserve enough credits for all extents possibly underlying a large folio. However it was too eager to reduce the number of reserved credits. Extent conversion may not only need to touch several leaf extent blocks, it may also need to split extents - for example a single large unwritten extent may need to be split into many small written ones in case of sparse folio dirtying. This can thus result not only in exte
In the Linux kernel, the following vulnerability has been resolved: ACPI: platform: Use acpi_bus_get_primary_device() The acpi_get_first_physical_node() usage in acpi_platform_fill_resource() and acpi_create_platform_device() is generally unsafe because in theory the device returned by it may be freed at any time [1]. It is also inefficient because acpi_get_first_physical_node() is called multiple times for the same argument which can be avoided. Address these issues by using acpi_bus_get_primary_device() instead of acpi_get_first_physical_node() and adjusting the code to call it just once at the beginning of and acpi_create_platform_devi
In the Linux kernel, the following vulnerability has been resolved: net: hsr: free learned nodes on device setup failure hsr_dev_finalize() can fail after a lower-device RX handler has already been registered (slave A is added before the failable slave B and interlink adds). RX handlers run in softirq regardless of the master's state, so frames received in that window can learn dynamic nodes into node_db, and the error unwind never releases them. Free both owned dynamic databases in the unwind, mirroring hsr_dellink(). proxy_node_db is provably empty on every current error exit (only interlink RX feeds it, and the interlink add is the last
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details?
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying.
In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocat
In the Linux kernel, the following vulnerability has been resolved: EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned long, but the target field (poll_msec) is unsigned int. On 64-bit systems, a value > UINT_MAX is silently truncated when stored. Fix the mismatch by using kstrtouint() instead. This rejects values larger than UINT_MAX at parse time, making truncation impossible. Also add a check for value < 1 to reject the 0-delay case, which would cause the poll work to spin without delay and consume 100% CPU.
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api
In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Address potential out-of-bounds read in resp_worker() Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")' fixes the scenario it was intended for by walking the message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it skipped over the bounds checking code that is included in decode_message(). This could lead to issues such as reading past the slab allocation's end, infinite loops or kernel panics. For those issues to happen, a malformed wire message is needed to be sent from the device. Instead of duplica
In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path.
In the Linux kernel, the following vulnerability has been resolved: nvme: fix racy access to FDP placement id array nvme_query_fdp_info() is called per-path and therefore prone to races. It populates head->nr_plids/head->plids for fdp registration. But nothing protects that pair from concurrent access - two paths scanning the same namespace can race to populate it. Avoid the race by moving this initialization work to nvme_alloc_ns_head() which is called once per shared namespace.
In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic Take the following unprivileged program as an example: r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */ ... 14: r0 += r1 /* r1 is a bounded scalar */ 15: r9 = r0 Loading it triggers a verifier warning from reg_bounds_sanity_check(): verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out of sync with range bounds r64={.base=0x0, .size=0x0} r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0) What happens: 1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(),
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 i
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix percpu map update indexing with sparse CPU IDs Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in possible-CPU order. The buffer is sized as: round_up(value_size, 8) * num_possible_cpus() The update paths iterate over possible CPUs, but use the logical CPU ID to calculate the source offset: value + size * cpu This only works when possible CPU IDs are contiguous starting at zero. For example, with a possible CPU mask of 0,2-3, the buffer contains three slots correspond
In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit
In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure.
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain struct amdxdna_cmd_chain contains a flexible array annotated with __counted_by(command_count). Since the structure is stored in shared AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently. If command_count is changed to zero, the bounds check generated from __counted_by may fail and trigger a kernel panic. Remove __counted_by to avoid relying on the userspace-controlled command_count for the flexible array bounds check.
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_c
Check your installed stack and versions against the current vulnerability feeds.