p PatchFirst

PatchFirst · Latest vulnerabilities

linux vulnerabilities · Page 62

Vulnerabilities published for linux in the last 30 days: 1050. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 20122

  1. CVE-2026-98003

    Not ratedEPSS 0.17%Fix available

    iommu/amd: Do not reallocate GA log buffers on resume

    In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Do not reallocate GA log buffers on resume Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement") moved the GA log allocation from iommu_init_pci() to enable_iommus_vapic(), which is called on every resume. iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail unconditionally. Each resume therefore replaces the boot-time pointers and leaks both old allocations. The function also uses GFP_KERNEL from a syscore resume callback, where interrupts are disabled and the non-boot CPUs are offline. Return early if both buff

    • Update to 7.2.7-1
    Published Updated
  2. CVE-2026-98002

    High · CVSS 7.8EPSS 0.11%Fix available

    iommu/amd: Fix ineffective error check in nested domain allocation

    In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID t

    • Update to 7.2.7-1
    Published Updated
  3. CVE-2026-98001

    Not ratedEPSS 0.17%Fix available

    hwmon: (ltc4282) Make sure clk_init_data is fully initialized

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. ltc428_clk_provider_setup() does not fill in any parent clocks, and assumes that init.num_parents is NULL. However, the latter in uninitialized, and thus may

    • Update to 7.2.7-1
    Published Updated
  4. CVE-2026-98000

    Not ratedEPSS 0.17%Fix available

    hwmon: Fix potential UAF in pec_store

    In the Linux kernel, the following vulnerability has been resolved: hwmon: Fix potential UAF in pec_store Sashiko reports: In pec_store(), a guard(mutex)(&hwdev->lock) is taken. If the chip write operation returns an error other than -EOPNOTSUPP, the code jumps to the put label, which calls put_device(hdev). If this drops the final reference, the device is freed. When the function then returns, the guard cleanup function runs and attempts to unlock the freed mutex. Use scoped_guard() instead of guard() to avoid the problem.

    • Update to 7.2.7-1
    Published Updated
  5. CVE-2026-97998

    Not ratedEPSS 0.22%Fix available

    netfilter: nfnetlink_log: cope with concurrent instance destruction

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0

    • Update to 7.2.7-1
    Published Updated
  6. CVE-2026-97997

    Medium · CVSS 5.7EPSS 0.17%Fix available

    virtio_ring: fix stale descriptor flags after a failed packed add

    In the Linux kernel, the following vulnerability has been resolved: virtio_ring: fix stale descriptor flags after a failed packed add In a packed ring the AVAIL and USED bits sit in the descriptor itself, so writing them makes that descriptor available. Those bit combinations flip meaning on every round of the ring, tracked by a wrap counter, so invalidating or validating a descriptor means inverting both bits. Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has virtqueue_add_packed() make every descriptor of a chain available as it maps the chain, and write the head last. The device consumes the ring in order and stops

    • Update to 7.2.7-1
    Published Updated
  7. CVE-2026-97996

    Not ratedEPSS 0.17%Fix available

    virtio: fix use-after-free in unregister_virtio_device()

    In the Linux kernel, the following vulnerability has been resolved: virtio: fix use-after-free in unregister_virtio_device() device_unregister() is device_del() plus put_device(). When the caller holds no extra reference, that drops the last one and runs the release callback, which for several transports frees the memory the embedded struct virtio_device sits in. unregister_virtio_device() then calls virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed object. Affected transports are the ones whose release callback frees and whose remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml, mlxbf-tmfifo and vi

    • Update to 7.2.7-1
    Published Updated
  8. CVE-2026-97995

    Not ratedEPSS 0.18%Fix available

    virtio_console: do not free control-out buffers on remove

    In the Linux kernel, the following vulnerability has been resolved: virtio_console: do not free control-out buffers on remove __send_control_msg() publishes &portdev->cpkt as the control-out virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover cookies to free_buf(), which treats them as struct port_buffer and reads sgpages. If a control message is still on c_ovq when the device is unbound, free_buf() reads past the ports_device object. KASAN reported slab-out-of-bounds in free_buf(): free_buf remove_vqs virtcons_remove unbind_store The object was the ports_device allocated in virtcons_probe(). Drain c_ovq withou

    • Update to 7.2.7-1
    Published Updated
  9. CVE-2026-97994

    Not ratedEPSS 0.21%Fix available

    vhost/vdpa: reject VRING_NUM larger than device max

    In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: reject VRING_NUM larger than device max vhost_vring_set_num() accepts any non-zero power-of-two queue size that fits in 16 bits. vhost-vdpa then passes that value to set_vq_num() without comparing it with get_vq_num_max(). A process with access to /dev/vhost-vdpa-* can therefore configure a queue larger than the device advertises. With vdpa_sim, the worker can walk descriptors beyond the mapped descriptor ring. KASAN reports a 16-byte out-of-bounds read, corresponding to one vring_desc, in the vringh IOTLB path: BUG: KASAN: out-of-bounds in _copy_from_iter

    • Update to 7.2.7-1
    Published Updated
  10. CVE-2026-97993

    Not ratedEPSS 0.22%Fix available

    vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx

    In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value into v->config_ctx before checking it, so on failure the field briefly holds an ERR_PTR: ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd); swap(ctx, v->config_ctx); if (!IS_ERR_OR_NULL(ctx)) eventfd_ctx_put(ctx); if (IS_ERR(v->config_ctx)) { long ret = PTR_ERR(v->config_ctx); v->config_ctx = NULL; return ret; } Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails") adde

    • Update to 7.2.7-1
    Published Updated
  11. CVE-2026-97992

    Not ratedEPSS 0.2%Fix available

    vhost-vdpa: protect config_ctx from being freed under the config callback

    In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback th

    • Update to 7.2.7-1
    Published Updated
  12. CVE-2026-97991

    High · CVSS 7.8EPSS 0.12%Fix available

    vdpa_sim_blk: reject out-of-range sector starts

    In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out

    • Update to 7.2.7-1
    Published Updated
  13. CVE-2026-97990

    High · CVSS 7.5EPSS 0.12%Fix available

    vdpa_sim_net: check TX pull result before RX copy

    In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_net: check TX pull result before RX copy vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is currently added to the unsigned byte counter and then passed as a size_t length to receive_filter() and vringh_iov_push_iotlb(). A negative error can therefore become a large length in the RX path. Handle non-positive pull results before every length use. Count the TX error and complete the consumed TX descriptor with zero bytes. I found this bug myself, though the patch was written with AI assistance.

    • Update to 7.2.7-1
    Published Updated
  14. CVE-2026-97989

    Not ratedEPSS 0.17%Fix available

    vduse: validate virtqueue alignment

    In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reac

    • Update to 7.2.7-1
    Published Updated
  15. CVE-2026-97988

    High · CVSS 8.4EPSS 0.17%Fix available

    vhost: invalidate vring access on IOTLB transitions

    In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's

    • Update to 7.2.7-1
    Published Updated
  16. CVE-2026-97987

    Not ratedEPSS 0.17%Fix available

    virtio_input: reset device if input_register_device() fails

    In the Linux kernel, the following vulnerability has been resolved: virtio_input: reset device if input_register_device() fails Probe marks the device DRIVER_OK with virtio_device_ready() before calling input_register_device(). If registration fails, the error path cleared vi->ready and called del_vqs() while the device was still live, so the device could keep DMA to queues that were already torn down. Match remove/freeze: call virtio_reset_device() on that path before tearing down the virtqueues.

    • Update to 7.2.7-1
    Published Updated
  17. CVE-2026-97986

    Not ratedEPSS 0.17%Fix available

    virtio_input: stop callbacks before unregistering input device

    In the Linux kernel, the following vulnerability has been resolved: virtio_input: stop callbacks before unregistering input device virtinput_remove() unregisters the input device before resetting the virtio device. virtinput_recv_events() drops vi->lock around input_event(), so clearing vi->ready does not stop a callback that passed the entry check. It can still use vi->idev, requeue buffers and kick the queue. Reset first, as virtinput_freeze() already does. With the preceding core change, reset waits for callbacks before input_unregister_device() can free vi->idev. Recheck vi->ready after taking the lock again: keep draining completed ev

    • Update to 7.2.7-1
    Published Updated
  18. CVE-2026-97985

    Medium · CVSS 6.8EPSS 0.17%Fix available

    af_unix: Update last skb marker in manage_oob().

    In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0],

    • Update to 7.2.7-1
    Published Updated
  19. CVE-2026-97984

    Medium · CVSS 4.8EPSS 0.17%Fix available

    net: ipv6: Fix UDP length overflow with PMTU discover and big MTU

    In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_

    • Update to 7.2.7-1
    Published Updated
  20. CVE-2026-97983

    Not ratedEPSS 0.15%Fix available

    vduse: return compat ioctl results directly

    In the Linux kernel, the following vulnerability has been resolved: vduse: return compat ioctl results directly The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but then calls the native handler. Their different command sizes make native dispatch return -ENOIOCTLCMD. For GET_FD, this overwrites receive_fd()'s return value after the descriptor is installed, leaking one fd per call. Return handled compat results directly and use native dispatch only for other commands.

    • Update to 7.2.7-1
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →