svcrdma: Reject oversized Read segments at decode time
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segm
svcrdma: Reject Read lists that exceed the page budget
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Read lists that exceed the page budget
Individual Read segment lengths are validated at decode time, but
nothing prevents a requester from sending multiple segments whose
cumulative length exceeds the rq_pages array budget. When one
segment fills the page array exactly, the runtime guard in
svc_rdma_build_read_segment() is bypassed because len reaches zero.
A subsequent segment then accesses the NULL sentinel slot at
rq_pages[rq_maxpages], resulting in a NULL pointer dereference during
DMA mapping.
Accumulate pages across all Read segments and reject the me
svcrdma: Use svc_xprt_put to free listener on create failure
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module
svcrdma: Validate Read chunk positions before reconstruction
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Validate Read chunk positions before reconstruction
The RPC/RDMA Read chunk position field is supplied by the remote
client and stored verbatim in the parsed chunk list.
xdr_count_read_segments() checks only 4-byte alignment; it never
compares the position against the received inline body length.
In the single-chunk path, svc_rdma_read_complete_one() splits the
head and tail kvecs at ch_position. A position past the inline
body underflows the tail length, exposing adjacent slab memory to
the upper XDR decoder.
In the multi-chunk path, svc_rdma_read_multiple_chunk
In the Linux kernel, the following vulnerability has been resolved:
udf: reject VAT indexes equal to the entry count
UDF 1.50 virtual partition mapping uses the VAT as an array of physical
block mappings. s_num_entries stores the number of entries in that array,
not the highest valid index. The valid VAT indexes are therefore below
s_num_entries.
udf_get_pblock_virt15() currently rejects only indexes greater than
s_num_entries. A crafted image can request index s_num_entries, pass the
bounds check, and make the kernel read one entry past the allocated VAT table.
Change the check to reject block >= s_num_entries, so the count is handled as
wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets
ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from
assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower
bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx()
bounds the declared lengths from above (their sum must fit the received
event), but an assoc request/response shorter than its fixed offset still
underflows here: the u8 wraps to ~250, and cfg80211_connect_result() /
cfg80211_roamed() then treat that wrapped value as the IE length and cop
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: cancel pending mlo_pm_work
If the device is reset, suspended or unregistered within that window,
the pending work can still run and access vif/bss data that may already
be freed, or send MCU commands while the firmware is not available.
Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown
and suspend paths:
- mt7925_mac_reset_work() (chip reset recovery)
- mt7925e_unregister_device() (PCIe unbind)
- mt7925_pci_suspend() (PCIe bus suspend)
- mt7925_suspend() (mac80211 suspend)
- mt7925u_suspend(
media: staging/ipu7: fix async notifier UAF on probe error path
In the Linux kernel, the following vulnerability has been resolved:
media: staging/ipu7: fix async notifier UAF on probe error path
isys_register_devices() registers the V4L2 async notifier via
isys_notifier_init(). If a subsequent probe step such as
isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label
which only calls isys_unregister_devices(). That helper tears down the
video devices, subdevices, V4L2 device and media device, but never
unregisters or cleans up the async notifier.
As a result the notifier stays chained in the global notifier_list while
the enclosing struct ipu7_isys is freed by devres, leading to list
cor
sched/core: Handle pick_task() releasing the rq lock
In the Linux kernel, the following vulnerability has been resolved:
sched/core: Handle pick_task() releasing the rq lock
Core scheduling's pick_next_task() breaks when a ->pick_task()
implementation can release the rq lock. The selection state derived on entry
is only valid while the lock is held continuously. Once a pick can drop the
lock, an interleaving selection can invalidate all of it: the single-CPU
fast path can commit an uncookied pick although the core went cookied during
the release, and forceidle committed by the interleaving selection skews the
restarted pass's accounting.
Fix it by restarting the whole selection when a pick r
sched/core: Make core-sched flips wait for in-flight selections
In the Linux kernel, the following vulnerability has been resolved:
sched/core: Make core-sched flips wait for in-flight selections
Core scheduling's pick_next_task() operates on all sibling rqs under one
acquisition of the shared core-wide lock. A ->pick_task() that releases the
rq lock leaves every sibling __lock momentarily free, letting
__sched_core_flip(false) complete mid-selection and rebind rq_lockp() under
it. The selection resumes on the split locks, touching sibling state it no
longer protects, and __schedule() finally releases a lock that was never
taken while leaking the one that was.
Count in-flight core-wide selections in th
sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return
SCX_RQ_BAL_KEEP tells the pick to keep running the previous task, a leftover
from when balancing and picking were separate operations. An rq-level flag
only works while dispatches and picks pair up one to one, which core
scheduling breaks: selections interleave through dispatch's lock drops and a
pick can consume a stale flag, keeping a task that has since been dequeued.
Fixing core scheduling support requires the decision to travel with the
dispatch that made it. Make scx_dispatch_sched() and balance_one() r
sched_ext: Fix this_rq() assumptions in dispatch kfuncs
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix this_rq() assumptions in dispatch kfuncs
Under core scheduling, dispatch runs from within the core-wide pick and can
target a sibling rq, so ops.dispatch() may execute on a CPU different from
the dispatched rq's. Several kfunc paths assumed the two always coincide:
- scx_dsq_move() decided whether an rq lock is held by testing this_rq()'s
rq flags and lock-danced accordingly. A dispatch for a sibling took the
unlocked-context branch and acquired the source rq lock on top of the
already held dispatched rq lock which could deadlock.
- scx_bpf_sub_dispat
sched_ext: Fix rq->core_pick corruption under core scheduling
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix rq->core_pick corruption under core scheduling
Core scheduling's pick_next_task() picks what to run on every SMT sibling of
the core in a single pass under the shared core-wide rq lock. The selection
state is consistent only while the lock is held continuously, so
->pick_task() originally could not release it. However, since 4c95380701f5
("sched/ext: Fold balance_scx() into pick_task_scx()"), sched_ext runs
dispatch from inside the pick and dispatching can drop the rq lock. To
support this, pick_next_task() has been updated to restart the whole
selection when
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from
run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru
runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and
hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip.
tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID
check and the BUG_ON would leave a window where destroy_dsq() can
invalidate the id between the two reads and still trigger the BUG_ON.
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with
kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via
spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this
atomic context and can trigger a sleeping-from-invalid-context warning
or deadlock.
Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock.
RISC-V: KVM: Fix PMU event info array size overflow
In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Fix PMU event info array size overflow
SBI PMU EVENT_GET_INFO stores guest-controlled num_events * sizeof(*einfo)
in a 32-bit integer. On RV64, num_events = 0x10000001 makes 0x100000010
truncate to 16. KVM then allocates one entry but loops over the original
num_events, causing out-of-bounds reads and writes. A nested guest
triggered:
BUG: KASAN: slab-out-of-bounds in kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
Read of size 4 at addr ff600000074d46b0 by task init/1
Call Trace:
[<ffffffff8006471c>] kvm_riscv_vcpu_pmu_event_info+0xa4/0x142
[<ffffffff800690c0>] kvm_
remoteproc: scp: Fix device reference leak on failed lookup
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: scp: Fix device reference leak on failed lookup
Make sure to drop the reference taken to the SCP device when attempting
to look up its driver data before the driver has been bound.
Note that holding a reference to a device does not prevent its driver
data from going away.
qede: Fix NULL pointer dereference in TPA fragment processing
In the Linux kernel, the following vulnerability has been resolved:
qede: Fix NULL pointer dereference in TPA fragment processing
Under memory pressure, the qede driver encounters NULL pointer
dereferences when processing TPA continuation fragments.
Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally
dropped the assignment of tpa_info->buffer.data in qede_tpa_start().
When memory pressure causes an SKB allocation failure in qede_tpa_start(),
the driver sets tpa_start_fail = true and attempts to recycle the physical
page later in qede_tpa_end() via qede_reuse_page(). However, because
buffer.data was left uninitialized (NULL
RDMA/cxgb4: Cancel reg_work before freeing device on remove
In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Cancel reg_work before freeing device on remove
c4iw_uld_state_change() queues reg_work to register the RDMA device.
c4iw_remove() can free ctx->dev while this work is pending or running,
leaving c4iw_register_device() accessing the freed device.
Cancel reg_work before removing the device. The registration work can
tear down ctx->dev when registration fails, so do not unregister or
deallocate it again in that case.
This issue was found by an in-house static analysis tool.