p PatchFirst

PatchFirst · Latest vulnerabilities

linux-aws-5.15 vulnerabilities · Page 185

Vulnerabilities published for linux-aws-5.15 in the last 30 days: 0. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 4238

  1. CVE-2024-26671

    Medium · CVSS 5.7EPSS 0.19%Fix available

    blk-mq: fix IO hang from sbitmap wakeup race

    In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix IO hang from sbitmap wakeup race In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered with the following blk_mq_get_driver_tag() in case of getting driver tag failure. Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime blk_mq_mark_tag_wait() can't get driver tag successfully. This issue can be reproduced by running the following test in loop, and fio hang can be observed in < 30min when running it on my test VM in laptop. modprobe -r scsi_debug modprobe sc

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  2. CVE-2023-52635

    Medium · CVSS 5.5EPSS 0.23%Fix available

    PM / devfreq: Synchronize devfreq_monitor_[start/stop]

    In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  3. CVE-2023-52633

    Medium · CVSS 5.7EPSS 0.23%Fix available

    um: time-travel: fix time corruption

    In the Linux kernel, the following vulnerability has been resolved: um: time-travel: fix time corruption In 'basic' time-travel mode (without =inf-cpu or =ext), we still get timer interrupts. These can happen at arbitrary points in time, i.e. while in timer_read(), which pushes time forward just a little bit. Then, if we happen to get the interrupt after calculating the new time to push to, but before actually finishing that, the interrupt will set the time to a value that's incompatible with the forward, and we'll crash because time goes backwards when we do the forwarding. Fix this by reading the time_travel_time, calculating the adjustm

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  4. CVE-2024-26669

    High · CVSS 7.1EPSS 0.24%Fix available

    net/sched: flower: Fix chain template offload

    In the Linux kernel, the following vulnerability has been resolved: net/sched: flower: Fix chain template offload When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack do

    • Update to 5.15.0-1072.78~20.04.1
    Published Updated
  5. CVE-2024-26668

    Medium · CVSS 5.5EPSS 0.24%Fix available

    netfilter: nft_limit: reject configurations that cause integer overflow

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: reject configurations that cause integer overflow Reject bogus configs where internal token counter wraps around. This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit.

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  6. CVE-2024-26665

    Critical · CVSS 9.1EPSS 0.68%Fix available

    tunnels: fix out of bounds access when building IPv6 PMTU error

    In the Linux kernel, the following vulnerability has been resolved: tunnels: fix out of bounds access when building IPv6 PMTU error If the ICMPv6 error is built from a non-linear skb we get the following splat, BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240 Read of size 4 at addr ffff88811d402c80 by task netperf/820 CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543 ... kasan_report+0xd8/0x110 do_csum+0x220/0x240 csum_partial+0xc/0x20 skb_tunnel_check_pmtu+0xeb9/0x3280 vxlan_xmit_one+0x14c2/0x4080 vxlan_xmit+0xf61/0x5c00 dev_hard_start_xmit+0xfb/0x510 __dev_queue_xmit+0x7cd/0x32a0 br_dev_que

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  7. CVE-2024-26664

    High · CVSS 7.8EPSS 0.25%Fix available

    hwmon: (coretemp) Fix out-of-bounds memory access

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Fix out-of-bounds memory access Fix a bug that pdata->cpu_map[] is set before out-of-bounds check. The problem might be triggered on systems with more than 128 cores per package.

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  8. CVE-2024-26663

    High · CVSS 7.8EPSS 0.25%Fix available

    tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()

    In the Linux kernel, the following vulnerability has been resolved: tipc: Check the bearer type before calling tipc_udp_nl_bearer_add() syzbot reported the following general protection fault [1]: general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087] ... RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291 ... Call Trace: <TASK> tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlin

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  9. CVE-2024-26661

    Medium · CVSS 5.5EPSS 0.22%Fix available

    drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL.

    • Update to 5.15.0-1072.78~20.04.1
    Published Updated
  10. CVE-2024-26660

    High · CVSS 7EPSS 0.27%Fix available

    drm/amd/display: Implement bounds check for stream encoder creation in DCN301

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Implement bounds check for stream encoder creation in DCN301 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to acces

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  11. CVE-2024-26659

    High · CVSS 7.8EPSS 0.24%Fix available

    xhci: handle isoc Babble and Buffer Overrun events properly

    In the Linux kernel, the following vulnerability has been resolved: xhci: handle isoc Babble and Buffer Overrun events properly xHCI 4.9 explicitly forbids assuming that the xHC has released its ownership of a multi-TRB TD when it reports an error on one of the early TRBs. Yet the driver makes such assumption and releases the TD, allowing the remaining TRBs to be freed or overwritten by new TDs. The xHC should also report completion of the final TRB due to its IOC flag being set by us, regardless of prior errors. This event cannot be recognized if the TD has already been freed earlier, resulting in "Transfer event TRB DMA ptr not part of c

    • Update to 5.15.0-1063.69~20.04.1
    Published Updated
  12. CVE-2023-52631

    Medium · CVSS 5.5EPSS 0.22%Fix available

    fs/ntfs3: Fix an NULL dereference bug

    In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix an NULL dereference bug The issue here is when this is called from ntfs_load_attr_list(). The "size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow on a 64bit systems but on 32bit systems the "+ 1023" can overflow and the result is zero. This means that the kmalloc will succeed by returning the ZERO_SIZE_PTR and then the memcpy() will crash with an Oops on the next line.

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  13. CVE-2024-26654

    High · CVSS 7.8EPSS 0.26%Fix available

    ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs

    In the Linux kernel, the following vulnerability has been resolved: ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs The dreamcastcard->timer could schedule the spu_dma_work and the spu_dma_work could also arm the dreamcastcard->timer. When the snd_pcm_substream is closing, the aica_channel will be deallocated. But it could still be dereferenced in the worker thread. The reason is that del_timer() will return directly regardless of whether the timer handler is running or not and the worker could be rescheduled in the timer handler. As a result, the UAF bug will happen. The racy situation is shown below: (Thread 1)

    • Update to 5.15.0-1065.71~20.04.1
    Published Updated
  14. CVE-2023-52629

    High · CVSS 8.4EPSS 0.25%Fix available

    sh: push-switch: Reorder cleanup operations to avoid use-after-free bug

    In the Linux kernel, the following vulnerability has been resolved: sh: push-switch: Reorder cleanup operations to avoid use-after-free bug The original code puts flush_work() before timer_shutdown_sync() in switch_drv_remove(). Although we use flush_work() to stop the worker, it could be rescheduled in switch_timer(). As a result, a use-after-free bug can occur. The details are shown below: (cpu 0) | (cpu 1) switch_drv_remove() | flush_work() | ... | switch_timer // timer | schedule_work(&psw->work) timer_shutdo

    • Update to 5.15.0-1068.74~20.04.1
    Published Updated
  15. CVE-2023-52628

    High · CVSS 7.8EPSS 0.67%Fix available

    netfilter: nftables: exthdr: fix 4-byte stack OOB write

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: exthdr: fix 4-byte stack OOB write If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961).

    • Update to 5.15.0-1048.53~20.04.1
    Published Updated
  16. CVE-2023-52627

    Medium · CVSS 5.5EPSS 0.23%Fix available

    iio: adc: ad7091r: Allow users to configure device events

    In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7091r: Allow users to configure device events AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null point

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  17. CVE-2023-52623

    High · CVSS 7.8EPSS 0.28%Fix available

    SUNRPC: Fix a suspicious RCU usage warning

    In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  18. CVE-2023-52622

    Medium · CVSS 5.5EPSS 0.24%Fix available

    ext4: avoid online resizing failures due to oversized flex bg

    In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: <TASK> __kmalloc_large_node+0xa2/0x2

    • Update to 5.15.0-1061.67~20.04.1
    Published Updated
  19. CVE-2023-52621

    High · CVSS 7.8EPSS 0.24%Fix available

    bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers

    In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010

    • Update to 5.15.0-1073.79~20.04.1
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →