In the Linux kernel, the following vulnerability has been resolved:
netns: Make get_net_ns() handle zero refcount net
Syzkaller hit a warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 7890 at lib/refcount.c:25 refcount_warn_saturate+0xdf/0x1d0
Modules linked in:
CPU: 3 PID: 7890 Comm: tun Not tainted 6.10.0-rc3-00100-gcaa4f9578aba-dirty #310
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xdf/0x1d0
Code: 41 49 04 31 ff 89 de e8 9f 1e cd fe 84 db 75 9c e8 76 26 cd fe c6 05 b6 41 49 04 01 90 48 c7 c7 b8 8e 25 86 e8 d2 05 b5 fe 90 <0f> 0b 90 90 e9 79 ff ff
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
In the Linux kernel, the following vulnerability has been resolved:
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic. In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:
CPU0 CPU1
last_boosted_vcpu = 0xff;
(last_boosted_vcpu = 0x100)
iommu: Return right value in iommu_sva_bind_device()
In the Linux kernel, the following vulnerability has been resolved:
iommu: Return right value in iommu_sva_bind_device()
iommu_sva_bind_device() should return either a sva bond handle or an
ERR_PTR value in error cases. Existing drivers (idxd and uacce) only
check the return value with IS_ERR(). This could potentially lead to
a kernel NULL pointer dereference issue if the function returns NULL
instead of an error pointer.
In reality, this doesn't cause any problems because iommu_sva_bind_device()
only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA.
In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will
r
ocfs2: fix races between hole punching and AIO+DIO
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix races between hole punching and AIO+DIO
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which ca
wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects
The hwmp code use objects of type mesh_preq_queue, added to a list in
ieee80211_if_mesh, to keep track of mpath we need to resolve. If the mpath
gets deleted, ex mesh interface is removed, the entries in that list will
never get cleaned. Fix this by flushing all corresponding items of the
preq_queue in mesh_path_flush_pending().
This should take care of KASAN reports like this:
unreferenced object 0xffff00000668d800 (size 128):
comm "kworker/u8:4", pid 67, jiffies 4295419552 (age 1836.444s)
hex dump (first 32 b
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE.
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
Fix a memory leak on logi_dj_recv_send_report() error path.
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos/vidi: fix memory leak in .get_modes()
The duplicated EDID is never freed. Fix it.
wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: check n_ssids before accessing the ssids
In some versions of cfg80211, the ssids poinet might be a valid one even
though n_ssids is 0. Accessing the pointer in this case will cuase an
out-of-bound access. Fix this by checking n_ssids first.
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c0000
wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()
The ieee80211_sta_ps_deliver_wakeup() function takes sta->ps_lock to
synchronizes with ieee80211_tx_h_unicast_ps_buf() which is called from
softirq context. However using only spin_lock() to get sta->ps_lock in
ieee80211_sta_ps_deliver_wakeup() does not prevent softirq to execute
on this same CPU, to run ieee80211_tx_h_unicast_ps_buf() and try to
take this same lock ending in deadlock. Below is an example of rcu stall
that arises in such situation.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 2-
wifi: cfg80211: Lock wiphy in cfg80211_get_station
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Lock wiphy in cfg80211_get_station
Wiphy should be locked before calling rdev_get_station() (see lockdep
assert in ieee80211_get_station()).
This fixes the following kernel NULL dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000
ax25: Fix refcount imbalance on inbound connections
In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount imbalance on inbound connections
When releasing a socket in ax25_release(), we call netdev_put() to
decrease the refcount on the associated ax.25 device. However, the
execution path for accepting an incoming connection never calls
netdev_hold(). This imbalance leads to refcount errors, and ultimately
to kernel crashes.
A typical call trace for the above situation will start with one of the
following errors:
refcount_t: decrement hit 0; leaking memory.
refcount_t: underflow; use-after-free.
And will then have a trace like:
Call Trace:
<
ipv6: fix possible race in __fib6_drop_pcpu_from()
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible race in __fib6_drop_pcpu_from()
syzbot found a race in __fib6_drop_pcpu_from() [1]
If compiler reads more than once (*ppcpu_rt),
second read could read NULL, if another cpu clears
the value in rt6_get_pcpu_route().
Add a READ_ONCE() to prevent this race.
Also add rcu_read_lock()/rcu_read_unlock() because
we rely on RCU protection while dereferencing pcpu_rt.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000012: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
C
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
In the Linux kernel, the following vulnerability has been resolved:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% i
In the Linux kernel, the following vulnerability has been resolved:
jfs: xattr: fix buffer overflow for invalid xattr
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff88
HID: core: remove unnecessary WARN_ON() in implement()
In the Linux kernel, the following vulnerability has been resolved:
HID: core: remove unnecessary WARN_ON() in implement()
Syzkaller hit a warning [1] in a call to implement() when trying
to write a value into a field of smaller size in an output report.
Since implement() already has a warn message printed out with the
help of hid_warn() and value in question gets trimmed with:
...
value &= m;
...
WARN_ON may be considered superfluous. Remove it to suppress future
syzkaller triggers.
[1]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline]
WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-c
liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet
In the Linux kernel, the following vulnerability has been resolved:
liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet
In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value,
but then it is unconditionally passed to skb_add_rx_frag() which looks
strange and could lead to null pointer dereference.
lio_vf_rep_copy_packet() call trace looks like:
octeon_droq_process_packets
octeon_droq_fast_process_packets
octeon_droq_dispatch_pkt
octeon_create_recv_info
...search in the dispatch_list...
->disp_fn(rdisp->rinfo, ...)
lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...)
In
In the Linux kernel, the following vulnerability has been resolved:
drm/komeda: check for error-valued pointer
komeda_pipeline_get_state() may return an error-valued pointer, thus
check the pointer for negative or null value before dereferencing.