p PatchFirst

PatchFirst · Latest vulnerabilities

linux-azure vulnerabilities · Page 104

Vulnerabilities published for linux-azure in the last 30 days: 0. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 3432

  1. CVE-2023-52881

    Critical · CVSS 9.8EPSS 0.61%Fix available

    tcp: do not accept ACK of bytes we never sent

    In the Linux kernel, the following vulnerability has been resolved: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be i

    • Update to 5.4.0-1126.133
    Published Updated
  2. CVE-2024-36015

    High · CVSS 7.8EPSS 0.25%Fix available

    ppdev: Add an error check in register_device

    In the Linux kernel, the following vulnerability has been resolved: ppdev: Add an error check in register_device In register_device, the return value of ida_simple_get is unchecked, in witch ida_simple_get will use an invalid index value. To address this issue, index should be checked after ida_simple_get. When the index value is abnormal, a warning message should be printed, the port should be dropped, and the value should be recorded.

    • Update to 5.4.0-1135.142
    Published Updated
  3. CVE-2024-36014

    Medium · CVSS 5.5EPSS 0.25%Fix available

    drm/arm/malidp: fix a possible null pointer dereference

    In the Linux kernel, the following vulnerability has been resolved: drm/arm/malidp: fix a possible null pointer dereference In malidp_mw_connector_reset, new memory is allocated with kzalloc, but no check is performed. In order to prevent null pointer dereferencing, ensure that mw_state is checked before calling __drm_atomic_helper_connector_reset.

    • Update to 5.4.0-1135.142
    Published Updated
  4. CVE-2023-52880

    High · CVSS 7.8EPSS 0.24%Fix available

    tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc

    In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that.

    • Update to 5.4.0-1133.140
    Published Updated
  5. CVE-2021-47572

    Medium · CVSS 5.5EPSS 0.21%Fix available

    net: nexthop: fix null pointer dereference when IPv6 is not enabled

    In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_s

    • Update to 5.4.0-1070.73
    Published Updated
  6. CVE-2021-47571

    High · CVSS 7.8EPSS 0.21%Fix available

    staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()

    In the Linux kernel, the following vulnerability has been resolved: staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that.

    • Update to 5.4.0-1070.73
    Published Updated
  7. CVE-2021-47566

    High · CVSS 7.8EPSS 0.23%Fix available

    proc/vmcore: fix clearing user buffer by properly using clear_user()

    In the Linux kernel, the following vulnerability has been resolved: proc/vmcore: fix clearing user buffer by properly using clear_user() To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/

    • Update to 5.4.0-1070.73
    Published Updated
  8. CVE-2021-47565

    High · CVSS 7.8EPSS 0.23%Fix available

    scsi: mpt3sas: Fix kernel panic during drive powercycle test

    In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.

    • Update to 5.4.0-1070.73
    Published Updated
  9. CVE-2021-47555

    High · CVSS 7.8EPSS 0.22%Fix available

    net: vlan: fix underflow for the real_dev refcnt

    In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix underflow for the real_dev refcnt Inject error before dev_hold(real_dev) in register_vlan_dev(), and execute the following testcase: ip link add dev dummy1 type dummy ip link add name dummy1.100 link dummy1 type vlan id 100 ip link del dev dummy1 When the dummy netdevice is removed, we will get a WARNING as following: ======================================================================= refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 and an endless loop of: =====================

    • Update to 5.4.0-1070.73
    Published Updated
  10. CVE-2021-47549

    High · CVSS 7.8EPSS 0.24%Fix available

    sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl

    In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_dr

    • Update to 5.4.0-1070.73
    Published Updated
  11. CVE-2021-47548

    Critical · CVSS 9.8EPSS 1.36%Fix available

    ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()

    In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns.

    • Update to 5.4.0-1070.73
    Published Updated
  12. CVE-2021-47547

    Medium · CVSS 4.4EPSS 0.23%Fix available

    net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound

    In the Linux kernel, the following vulnerability has been resolved: net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound.

    • Update to 5.4.0-1070.73
    Published Updated
  13. CVE-2021-47546

    Medium · CVSS 6.8EPSS 0.22%Fix available

    ipv6: fix memory leak in fib6_rule_suppress

    In the Linux kernel, the following vulnerability has been resolved: ipv6: fix memory leak in fib6_rule_suppress The kernel leaks memory when a `fib` rule is present in IPv6 nftables firewall rules and a suppress_prefix rule is present in the IPv6 routing rules (used by certain tools such as wg-quick). In such scenarios, every incoming packet will leak an allocation in `ip6_dst_cache` slab cache. After some hours of `bpftrace`-ing and source code reading, I tracked down the issue to ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule"). The problem with that change is that the generic `args->flags` always have `

    • Update to 5.4.0-1070.73
    Published Updated
  14. CVE-2021-47542

    Medium · CVSS 5.6EPSS 0.25%Fix available

    net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()

    In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differentia

    • Update to 5.4.0-1070.73
    Published Updated
  15. CVE-2021-47541

    High · CVSS 7.8EPSS 0.29%Fix available

    net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()

    In the Linux kernel, the following vulnerability has been resolved: net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent sec

    • Update to 5.4.0-1070.73
    Published Updated
  16. CVE-2021-47538

    Medium · CVSS 5.7EPSS 0.24%Fix available

    rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer()

    In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer() Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function]

    • Update to 5.4.0-1070.73
    Published Updated
  17. CVE-2021-47527

    Medium · CVSS 6.7EPSS 0.25%Fix available

    serial: core: fix transmit-buffer reset and memleak

    In the Linux kernel, the following vulnerability has been resolved: serial: core: fix transmit-buffer reset and memleak Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has bee

    • Update to 5.4.0-1070.73
    Published Updated
  18. CVE-2021-47521

    High · CVSS 7.8EPSS 0.24%Fix available

    can: sja1000: fix use after free in ems_pcmcia_add_card()

    In the Linux kernel, the following vulnerability has been resolved: can: sja1000: fix use after free in ems_pcmcia_add_card() If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up.

    • Update to 5.4.0-1070.73
    Published Updated
  19. CVE-2021-47520

    High · CVSS 8.8EPSS 0.34%Fix available

    can: pch_can: pch_can_rx_normal: fix use after free

    In the Linux kernel, the following vulnerability has been resolved: can: pch_can: pch_can_rx_normal: fix use after free After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue.

    • Update to 5.4.0-1070.73
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →