p PatchFirst

PatchFirst · Latest vulnerabilities

linux-gcp vulnerabilities · Page 12

Vulnerabilities published for linux-gcp in the last 30 days: 0. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 3446

  1. CVE-2022-50669

    Not ratedEPSS 0.25%Fix available

    misc: ocxl: fix possible name leak in ocxl_file_register_afu()

    In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible name leak in ocxl_file_register_afu() If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release().

    • Update to 5.4.0-1101.110
    Published Updated
  2. CVE-2022-50668

    High · CVSS 7.5EPSS 0.81%Fix available

    ext4: fix deadlock due to mbcache entry corruption

    In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock due to mbcache entry corruption When manipulating xattr blocks, we can deadlock infinitely looping inside ext4_xattr_block_set() where we constantly keep finding xattr block for reuse in mbcache but we are unable to reuse it because its reference count is too big. This happens because cache entry for the xattr block is marked as reusable (e_reusable set) although its reference count is too big. When this inconsistency happens, this inconsistent state is kept indefinitely and so ext4_xattr_block_set() keeps retrying indefinitely. The inconsistent state is

    • Update to 5.4.0-1101.110
    Published Updated
  3. CVE-2022-50660

    Not ratedEPSS 0.25%Fix available

    wifi: ipw2200: fix memory leak in ipw_wdev_init()

    In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2200: fix memory leak in ipw_wdev_init() In the error path of ipw_wdev_init(), exception value is returned, and the memory applied for in the function is not released. Also the memory is not released in ipw_pci_probe(). As a result, memory leakage occurs. So memory release needs to be added to the error path of ipw_wdev_init().

    • Update to 5.4.0-1107.116
    Published Updated
  4. CVE-2022-50659

    Not ratedEPSS 0.28%Fix available

    hwrng: geode - Fix PCI device refcount leak

    In the Linux kernel, the following vulnerability has been resolved: hwrng: geode - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path.

    • Update to 5.4.0-1101.110
    Published Updated
  5. CVE-2023-53820

    Not ratedEPSS 0.28%Fix available

    loop: loop_set_status_from_info() check before assignment

    In the Linux kernel, the following vulnerability has been resolved: loop: loop_set_status_from_info() check before assignment In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset

    • Update to 5.4.0-1132.141
    Published Updated
  6. CVE-2023-53818

    Not ratedEPSS 0.19%Fix available

    ARM: zynq: Fix refcount leak in zynq_early_slcr_init

    In the Linux kernel, the following vulnerability has been resolved: ARM: zynq: Fix refcount leak in zynq_early_slcr_init of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on error path. Add missing of_node_put() to avoid refcount leak.

    • Update to 5.4.0-1107.116
    Published Updated
  7. CVE-2023-53817

    High · CVSS 7.5EPSS 0.51%Fix available

    crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui()

    In the Linux kernel, the following vulnerability has been resolved: crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui() During NVMeTCP Authentication a controller can trigger a kernel oops by specifying the 8192 bit Diffie Hellman group and passing a correctly sized, but zeroed Diffie Hellamn value. mpi_cmp_ui() was detecting this if the second parameter was 0, but 1 is passed from dh_is_pubkey_valid(). This causes the null pointer u->d to be dereferenced towards the end of mpi_cmp_ui()

    • Update to 5.4.0-1120.129
    Published Updated
  8. CVE-2023-53804

    High · CVSS 7.8EPSS 0.14%Fix available

    nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode() During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may cause use-after-free read if inodes are left in "garbage_list" and released by nilfs_dispose_list() at the end of nilfs_detach_log_writer(). Fix this issue by modifying nilfs_evict_inode() to only clear inode without additional metadata changes that use nilfs_root if the file system is degr

    • Update to 5.4.0-1112.121
    Published Updated
  9. CVE-2023-53803

    High · CVSS 8.1EPSS 0.29%Fix available

    scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process()

    In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_enclosure_data_process() A fix for: BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses] Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271 Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we expect the size to be sanitized before first access to addl_desc_ptr[1]. Make sure we don't walk beyond end of page.

    • Update to 5.4.0-1107.116
    Published Updated
  10. CVE-2023-53802

    Not ratedEPSS 0.19%Fix available

    wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: htc_hst: free skb in ath9k_htc_rx_msg() if there is no callback function It is stated that ath9k_htc_rx_msg() either frees the provided skb or passes its management to another callback function. However, the skb is not freed in case there is no another callback function, and Syzkaller was able to cause a memory leak. Also minor comment fix. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

    • Update to 5.4.0-1107.116
    Published Updated
  11. CVE-2023-53800

    High · CVSS 7.8EPSS 0.14%Fix available

    ubi: Fix use-after-free when volume resizing failed

    In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume resizing failed There is an use-after-free problem reported by KASAN: ================================================================== BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2 PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_repor

    • Update to 5.4.0-1107.116
    Published Updated
  12. CVE-2023-53797

    High · CVSS 7.1EPSS 0.3%Fix available

    HID: wacom: Use ktime_t rather than int when dealing with timestamps

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Use ktime_t rather than int when dealing with timestamps Code which interacts with timestamps needs to use the ktime_t type returned by functions like ktime_get. The int type does not offer enough space to store these values, and attempting to use it is a recipe for problems. In this particular case, overflows would occur when calculating/storing timestamps leading to incorrect values being reported to userspace. In some cases these bad timestamps cause input handling in userspace to appear hung.

    • Update to 5.4.0-1117.126
    Published Updated
  13. CVE-2023-53796

    Not ratedEPSS 0.21%Fix available

    f2fs: fix information leak in f2fs_move_inline_dirents()

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix information leak in f2fs_move_inline_dirents() When converting an inline directory to a regular one, f2fs is leaking uninitialized memory to disk because it doesn't initialize the entire directory block. Fix this by zero-initializing the block. This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry"), which didn't consider the security implications of leaking uninitialized memory to disk. This was found by running xfstest generic/435 on a KMSAN-enabled kernel.

    • Update to 5.4.0-1107.116
    Published Updated
  14. CVE-2023-53788

    Not ratedEPSS 0.21%Fix available

    ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()

    In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set() tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUN

    • Update to 5.4.0-1110.119
    Published Updated
  15. CVE-2023-53786

    Not ratedEPSS 0.23%Fix available

    dm flakey: fix a crash with invalid table line

    In the Linux kernel, the following vulnerability has been resolved: dm flakey: fix a crash with invalid table line This command will crash with NULL pointer dereference: dmsetup create flakey --table \ "0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512" Fix the crash by checking if arg_name is non-NULL before comparing it.

    • Update to 5.4.0-1112.121
    Published Updated
  16. CVE-2023-53783

    Not ratedEPSS 0.21%Fix available

    blk-iocost: fix divide by 0 error in calc_lcoefs()

    In the Linux kernel, the following vulnerability has been resolved: blk-iocost: fix divide by 0 error in calc_lcoefs() echo max of u64 to cost.model can cause divide by 0 error. # echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model divide error: 0000 [#1] PREEMPT SMP RIP: 0010:calc_lcoefs+0x4c/0xc0 Call Trace: <TASK> ioc_refresh_params+0x2b3/0x4f0 ioc_cost_model_write+0x3cb/0x4c0 ? _copy_from_iter+0x6d/0x6c0 ? kernfs_fop_write_iter+0xfc/0x270 cgroup_file_write+0xa0/0x200 kernfs_fop_write_iter+0x17d/0x270 vfs_write+0x414/0x620 ksys_write+0x73/0x160 __x64_sys_write+0x1e/0x30 do_syscall_

    • Update to 5.4.0-1107.116
    Published Updated
  17. CVE-2023-53782

    Not ratedEPSS 0.24%Fix available

    dccp: Fix out of bounds access in DCCP error handler

    In the Linux kernel, the following vulnerability has been resolved: dccp: Fix out of bounds access in DCCP error handler There was a previous attempt to fix an out-of-bounds access in the DCCP error handlers, but that fix assumed that the error handlers only want to access the first 8 bytes of the DCCP header. Actually, they also look at the DCCP sequence number, which is stored beyond 8 bytes, so an explicit pskb_may_pull() is required.

    • Update to 5.4.0-1120.129
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →