PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-hwe-5.15 in the last 30 days: 0. Listed in the KEV catalogue: 0.
Vulnerabilities: 4389
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix deadlock on SRQ async events. xa_lock for SRQ table may be required in AEQ. Use xa_store_irq()/ xa_erase_irq() to avoid deadlock.
In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level.
In the Linux kernel, the following vulnerability has been resolved: netrom: fix possible dead-lock in nr_rt_ioctl() syzbot loves netrom, and found a possible deadlock in nr_rt_ioctl [1] Make sure we always acquire nr_node_list_lock before nr_node_lock(nr_node) [1] WARNING: possible circular locking dependency detected 6.9.0-rc7-syzkaller-02147-g654de42f3fc6 #0 Not tainted ------------------------------------------------------ syz-executor350/5129 is trying to acquire lock: ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff8880186e2070 (&nr_node->node_lock){+...}-{2:2}, at: nr_
In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix possible use-after-free issue in ftrace_location() KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d
In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds.
In the Linux kernel, the following vulnerability has been resolved: r8169: Fix possible ring buffer corruption on fragmented Tx packets. An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied.
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential hang in nilfs_detach_log_writer() Syzbot has reported a potential hang in nilfs_detach_log_writer() called during nilfs2 unmount. Analysis revealed that this is because nilfs_segctor_sync(), which synchronizes with the log writer thread, can be called after nilfs_segctor_destroy() terminates that thread, as shown in the call trace below: nilfs_detach_log_writer nilfs_segctor_destroy nilfs_segctor_kill_thread --> Shut down log writer thread flush_work nilfs_iput_work_func nilfs_dispose_list iput nilfs_evi
In the Linux kernel, the following vulnerability has been resolved: epoll: be better about file lifetimes epoll can call out to vfs_poll() with a file pointer that may race with the last 'fput()'. That would make f_count go down to zero, and while the ep->mtx locking means that the resulting file pointer tear-down will be blocked until the poll returns, it means that f_count is already dead, and any use of it won't actually get a reference to the file any more: it's dead regardless. Make sure we have a valid ref on the file pointer before we call down to vfs_poll() from the epoll routines.
In the Linux kernel, the following vulnerability has been resolved: crypto: bcm - Fix pointer arithmetic In spu2_dump_omd() value of ptr is increased by ciph_key_len instead of hash_iv_len which could lead to going beyond the buffer boundaries. Fix this bug by changing ciph_key_len to hash_iv_len. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: ecryptfs: Fix buffer size for tag 66 packet The 'TAG 66 Packet Format' description is missing the cipher code and checksum fields that are packed into the message packet. As a result, the buffer allocated for the packet is 3 bytes too small and write_tag_66_packet() will write up to 3 bytes past the end of the buffer. Fix this by increasing the size of the allocation so the whole packet will always fit in the buffer. This fixes the below kasan slab-out-of-bounds bug: BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0 Write of size 1 at add
In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: cppc_cpufreq: Fix possible null pointer dereference cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from different places with various parameters. So cpufreq_cpu_get() can return null as 'policy' in some circumstances. Fix this bug by adding null return check. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tsens: Fix null pointer dereference compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c) as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null pointer dereference (if DEBUG or DYNAMIC_DEBUG set). Fix this bug by adding null pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocate
In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: add a proper sanity check for endpoints Syzkaller reports [1] hitting a warning which is caused by presence of a wrong endpoint type at the URB sumbitting stage. While there was a check for a specific 4th endpoint, since it can switch types between bulk and interrupt, other endpoints are trusted implicitly. Similar warning is triggered in a couple of other syzbot issues [2]. Fix the issue by doing a comprehensive check of all endpoints taking into account difference between high- and full-speed configuration. [1] Syzkaller report: ... WARNING: CPU: 0 PID:
In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: enable proper endpoint verification Syzkaller reports [1] hitting a warning about an endpoint in use not having an expected type to it. Fix the issue by checking for the existence of all proper endpoints with their according types intact. Sadly, this patch has not been tested on real hardware. [1] Syzkaller report: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 3643 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> ar5523_cmd+0x41b/0x780 drivers/
In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Ensure the copied buf is NUL terminated Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user.
In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Ensure the copied buf is NUL terminated Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user.
In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the IC
Check your installed stack and versions against the current vulnerability feeds.