p PatchFirst

PatchFirst · Latest vulnerabilities

linux-ibm-5.15 vulnerabilities · Page 90

Vulnerabilities published for linux-ibm-5.15 in the last 30 days: 0. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 2540

  1. CVE-2023-52852

    High · CVSS 7.8EPSS 0.24%Fix available

    f2fs: compress: fix to avoid use-after-free on dic

    In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_ino

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  2. CVE-2023-52849

    Medium · CVSS 5.5EPSS 0.24%Fix available

    cxl/mem: Fix shutdown order

    In the Linux kernel, the following vulnerability has been resolved: cxl/mem: Fix shutdown order Ira reports that removing cxl_mock_mem causes a crash with the following trace: BUG: kernel NULL pointer dereference, address: 0000000000000044 [..] RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core] [..] Call Trace: <TASK> cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x29/0x40 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 device_unregister+0

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  3. CVE-2023-52847

    High · CVSS 7.8EPSS 0.19%Fix available

    media: bttv: fix use after free error due to btv->timeout timer

    In the Linux kernel, the following vulnerability has been resolved: media: bttv: fix use after free error due to btv->timeout timer There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe ->timer_setup

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  4. CVE-2023-52846

    High · CVSS 8.8EPSS 0.34%Fix available

    hsr: Prevent use after free in prp_create_tagged_frame()

    In the Linux kernel, the following vulnerability has been resolved: hsr: Prevent use after free in prp_create_tagged_frame() The prp_fill_rct() function can fail. In that situation, it frees the skb and returns NULL. Meanwhile on the success path, it returns the original skb. So it's straight forward to fix bug by using the returned value.

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  5. CVE-2023-52845

    High · CVSS 7.1EPSS 0.27%Fix available

    tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING

    In the Linux kernel, the following vulnerability has been resolved: tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING syzbot reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline] BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756 strlen lib/string.c:418 [inline] strstr+0xb8/0x2f0 lib/string.c:756 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline] genl_rcv_msg+0x1

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  6. CVE-2023-52843

    Medium · CVSS 5.5EPSS 0.24%Fix available

    llc: verify mac len before reading mac header

    In the Linux kernel, the following vulnerability has been resolved: llc: verify mac len before reading mac header LLC reads the mac header with eth_hdr without verifying that the skb has an Ethernet header. Syzbot was able to enter llc_rcv on a tun device. Tun can insert packets without mac len and with user configurable skb->protocol (passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] ll

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  7. CVE-2023-52841

    Medium · CVSS 5.7EPSS 0.24%Fix available

    media: vidtv: mux: Add check and kfree for kstrdup

    In the Linux kernel, the following vulnerability has been resolved: media: vidtv: mux: Add check and kfree for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Moreover, use kfree() in the later error handling in order to avoid memory leak.

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  8. CVE-2023-52840

    High · CVSS 7.8EPSS 0.24%Fix available

    Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()

    In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix use after free in rmi_unregister_function() The put_device() calls rmi_release_function() which frees "fn" so the dereference on the next line "fn->num_of_irqs" is a use after free. Move the put_device() to the end to fix this.

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  9. CVE-2023-52836

    High · CVSS 7.8EPSS 0.26%Fix available

    locking/ww_mutex/test: Fix potential workqueue corruption

    In the Linux kernel, the following vulnerability has been resolved: locking/ww_mutex/test: Fix potential workqueue corruption In some cases running with the test-ww_mutex code, I was seeing odd behavior where sometimes it seemed flush_workqueue was returning before all the work threads were finished. Often this would cause strange crashes as the mutexes would be freed while they were being used. Looking at the code, there is a lifetime problem as the controlling thread that spawns the work allocates the "struct stress" structures that are passed to the workqueue threads. Then when the workqueue threads are finished, they free the stress s

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  10. CVE-2023-52835

    High · CVSS 7.8EPSS 0.25%Fix available

    perf/core: Bail out early if the request AUX area is out of bound

    In the Linux kernel, the following vulnerability has been resolved: perf/core: Bail out early if the request AUX area is out of bound When perf-record with a large AUX area, e.g 4GB, it fails with: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) and it reveals a WARNING with __alloc_pages(): ------------[ cut here ]------------ WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248 Call trace: __alloc_pages+0x1ec/0x248 __kmalloc_large_node+0xc0/0x1f8 __kmalloc_node+0x134/0x1e8 rb_alloc_aux+0xe0/0x298 perf_mmap+0x440/0x660 mmap_region+0x308/0x

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  11. CVE-2023-52834

    High · CVSS 7.5EPSS 0.65%Fix available

    atl1c: Work around the DMA RX overflow issue

    In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540.

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  12. CVE-2023-52833

    Medium · CVSS 5.6EPSS 0.24%Fix available

    Bluetooth: btusb: Add date->evt_skb is NULL check

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Add date->evt_skb is NULL check fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 000

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  13. CVE-2023-52832

    Critical · CVSS 9.1EPSS 1.26%Fix available

    wifi: mac80211: don't return unset power in ieee80211_get_tx_power()

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't return unset power in ieee80211_get_tx_power() We can get a UBSAN warning if ieee80211_get_tx_power() returns the INT_MIN value mac80211 internally uses for "unset power level". UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5 -2147483648 * 100 cannot be represented in type 'int' CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE Call Trace: dump_stack+0x74/0x92 ubsan_epilogue+0x9/0x50 handle_overflow+0x8d/0xd0 __ubsan_handle_mul_overflow+0xe/0x10 nl80211_send_iface+0x688/0x6b0 [cfg80211] [...] cfg80211_register_wd

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  14. CVE-2023-52828

    Medium · CVSS 6.6EPSS 0.25%Fix available

    bpf: Detect IP == ksym.end as part of BPF program

    In the Linux kernel, the following vulnerability has been resolved: bpf: Detect IP == ksym.end as part of BPF program Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in callers will also never be marked as seen. The tempting way to fix this would be to emit extra 'int3' instructions which bump the jited_len of a prog

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  15. CVE-2023-52826

    Medium · CVSS 5.7EPSS 0.24%Fix available

    drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference

    In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  16. CVE-2023-52825

    High · CVSS 7.8EPSS 0.18%Fix available

    drm/amdkfd: Fix a race condition of vram buffer unref in svm code

    In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix a race condition of vram buffer unref in svm code prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free".

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated
  17. CVE-2023-52821

    Medium · CVSS 5.7EPSS 0.24%Fix available

    drm/panel: fix a possible null pointer dereference

    In the Linux kernel, the following vulnerability has been resolved: drm/panel: fix a possible null pointer dereference In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

    • Update to 5.15.0-1048.51~20.04.1
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →