In the Linux kernel, the following vulnerability has been resolved:
pwm: lpc32xx: Remove handling of PWM channels
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.
[ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246
[ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000
[ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d8
In the Linux kernel, the following vulnerability has been resolved:
FS: JFS: Fix null-ptr-deref Read in txBegin
Syzkaller reported an issue where txBegin may be called
on a superblock in a read-only mounted filesystem which leads
to NULL pointer deref. This could be solved by checking if
the filesystem is read-only before calling txBegin, and returning
with appropiate error code.
scsi: qla4xxx: Add length check when parsing nlattrs
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla4xxx: Add length check when parsing nlattrs
There are three places that qla4xxx parses nlattrs:
- qla4xxx_set_chap_entry()
- qla4xxx_iface_set_param()
- qla4xxx_sysfs_ddb_set_param()
and each of them directly converts the nlattr to specific pointer of
structure without length checking. This could be dangerous as those
attributes are not validated and a malformed nlattr (e.g., length 0) could
result in an OOB read that leaks heap dirty data.
Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.
HID: multitouch: Correct devm device reference for hidinput input_dev name
In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Correct devm device reference for hidinput input_dev name
Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.
Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix potential NULL pointer dereference
Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate
pointer before dereferencing the pointer.
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
In the Linux kernel, the following vulnerability has been resolved:
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
If a malicious fuzzer overwrites the ext4 superblock while it is
mounted such that the s_first_data_block is set to a very large
number, the calculation of the block group can underflow, and trigger
a BUG_ON check. Change this to be an ext4_warning so that we don't
crash the kernel.
s390/dasd: Fix potential memleak in dasd_eckd_init()
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix potential memleak in dasd_eckd_init()
`dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it
also needs to be freed before the error returns, just like the other
cases in this function.
clk: tegra20: Fix refcount leak in tegra20_clock_init
In the Linux kernel, the following vulnerability has been resolved:
clk: tegra20: Fix refcount leak in tegra20_clock_init
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
drm/vmwgfx: Validate the box size for the snooped cursor
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate the box size for the snooped cursor
Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173: Enable IRQ when pdata is ready
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c
drm/msm/hdmi: fix memory corruption with too many bridges
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/hdmi: fix memory corruption with too many bridges
Add the missing sanity check on the bridge counter to avoid corrupting
data beyond the fixed-sized bridge array in case there are ever more
than eight bridges.
Patchwork: https://patchwork.freedesktop.org/patch/502670/
ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly.
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here.
Ensure that we mark current as TASK_RUNNING for sleepable context.
[ 77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0
[ 77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160
[ 77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G OE 6.1.0-rc5 #1
[ 77.554910] Hardware name: Intel(R) Client Systems NUC
ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()
If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked.
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
There is an use-after-free reported by KASAN:
BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
Read of size 1 at addr ffff888112afc460 by task modprobe/2111
CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
Call Trace:
<TASK>
kasan_report+0xae/0xe0
acpi_ut_remove_reference+0x3b/0x82
acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
acpi_ds_store_object_to_local+0x15d/0x3a0
acpi_ex_store+0x78d/0x7fd
acpi_
scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()
In the Linux kernel, the following vulnerability has been resolved:
scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()
When executing SMP task failed, the smp_execute_task_sg() calls del_timer()
to delete "slow_task->timer". However, if the timer handler
sas_task_internal_timedout() is running, the del_timer() in
smp_execute_task_sg() will not stop it and a UAF will happen. The process
is shown below:
(thread 1) | (thread 2)
smp_execute_task_sg() | sas_task_internal_timedout()
... |
del_timer() |
... | ...
sas_free_task