PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-ibm in the last 30 days: 0. Listed in the KEV catalogue: 0.
Vulnerabilities: 3088
In the Linux kernel, the following vulnerability has been resolved: mtd: maps: pxa2xx-flash: fix memory leak in probe Free 'info' upon remapping error to avoid a memory leak. [<[email protected]>: Reword the commit log]
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it. Compile tested only.
In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox() pci_get_device() will increase the reference count for the returned 'dev'. We need to call pci_dev_put() to decrease the reference count. Since 'dev' is only used in pci_read_config_dword(), let's add pci_dev_put() right after it.
In the Linux kernel, the following vulnerability has been resolved: drm/bridge: megachips: Fix a null pointer dereference bug When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.9
In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool() svc_create_memory_pool() is only called from stratix10_svc_drv_probe(). Most of resources in the probe are managed, but not this memremap() call. There is also no memunmap() call in the file. So switch to devm_memremap() to avoid a resource leak.
In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix handling of virtual Fibre Channel timeouts Hyper-V provides the ability to connect Fibre Channel LUNs to the host system and present them in a guest VM as a SCSI device. I/O to the vFC device is handled by the storvsc driver. The storvsc driver includes a partial integration with the FC transport implemented in the generic portion of the Linux SCSI subsystem so that FC attributes can be displayed in /sys. However, the partial integration means that some aspects of vFC don't work properly. Unfortunately, a full and correct integration isn't practical beca
In the Linux kernel, the following vulnerability has been resolved: ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0
In the Linux kernel, the following vulnerability has been resolved: nbd: Fix hung when signal interrupts nbd_start_device_ioctl() syzbot reported hung task [1]. The following program is a simplified version of the reproducer: int main(void) { int sv[2], fd; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0) return 1; if ((fd = open("/dev/nbd0", 0)) < 0) return 1; if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0) return 1; if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0) return 1; if (ioctl(fd, NBD_DO_IT) < 0) return 1; return 0; } When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) =
In the Linux kernel, the following vulnerability has been resolved: erofs: fix order >= MAX_ORDER warning due to crafted negative i_size As syzbot reported [1], the root cause is that i_size field is a signed type, and negative i_size is also less than EROFS_BLKSIZ. As a consequence, it's handled as fast symlink unexpectedly. Let's fall back to the generic path to deal with such unusual i_size. [1] https://lore.kernel.org/r/[email protected]
In the Linux kernel, the following vulnerability has been resolved: drivers: serial: jsm: fix some leaks in probe This error path needs to unwind instead of just returning directly.
In the Linux kernel, the following vulnerability has been resolved: cxl: Fix refcount leak in cxl_calc_capp_routing of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function only calls of_node_put() in normal path, missing it in the error path. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved: iommu/omap: Fix buffer overflow in debugfs There are two issues here: 1) The "len" variable needs to be checked before the very first write. Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a buffer overflow. 2) The snprintf() function returns the number of bytes that *would* have been copied if there were enough space. But we want to know the number of bytes which were *actually* copied so use scnprintf() instead.
In the Linux kernel, the following vulnerability has been resolved: md: Replace snprintf with scnprintf Current code produces a warning as shown below when total characters in the constituent block device names plus the slashes exceeds 200. snprintf() returns the number of characters generated from the given input, which could cause the expression “200 – len” to wrap around to a large positive number. Fix this by using scnprintf() instead, which returns the actual number of characters written into the buffer. [ 1513.267938] ------------[ cut here ]------------ [ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprin
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: verify the expected usb_endpoints are present The bug arises when a USB device claims to be an ATH9K but doesn't have the expected endpoints. (In this case there was an interrupt endpoint where the driver expected a bulk endpoint.) The kernel needs to be able to handle such devices without getting an internal error. usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 3 PID: 500 at drivers/usb/core/urb.c:493 usb_submit_urb+0xce2/0x1430 drivers/usb/core/urb.c:493 Modules linked in: CPU: 3 PID: 500 Comm: kworker/3:2 Not tainted 5.10.135-syzkaller #0 Hardware
In the Linux kernel, the following vulnerability has been resolved: UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected, cpu_max_bits_warn() generates a runtime warning similar as below while we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [
In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix memory leak in lbs_init_adapter() When kfifo_alloc() failed in lbs_init_adapter(), cmd buffer is not released. Add free memory to processing error path.
In the Linux kernel, the following vulnerability has been resolved: kcm: annotate data-races around kcm->rx_psock kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. We do the same for kcm->rx_wait in the following patch. syzbot reported: BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1: unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313 kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:
In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/hisi: Drop second sensor hi3660 The commit 74c8e6bffbe1 ("driver core: Add __alloc_size hint to devm allocators") exposes a panic "BRK handler: Fatal exception" on the hi3660_thermal_probe funciton. This is because the function allocates memory for only one sensors array entry, but tries to fill up a second one. Fix this by removing the unneeded second access.
In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Add check for kzalloc As kzalloc may fail and return NULL pointer, it should be better to check the return value in order to avoid the NULL pointer dereference. Patchwork: https://patchwork.freedesktop.org/patch/514154/
Check your installed stack and versions against the current vulnerability feeds.