p PatchFirst

PatchFirst · Latest vulnerabilities

linux-nvidia-tegra-5.15 vulnerabilities · Page 13

Vulnerabilities published for linux-nvidia-tegra-5.15 in the last 30 days: 0. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 2668

  1. CVE-2023-54053

    Not ratedEPSS 0.25%Fix available

    wifi: iwlwifi: pcie: fix possible NULL pointer dereference

    In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: fix possible NULL pointer dereference It is possible that iwl_pci_probe() will fail and free the trans, then afterwards iwl_pci_remove() will be called and crash by trying to access trans which is already freed, fix it. iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2 wfpm id 0xa5a5a5a2 iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2 ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x

    • Update to 5.15.0-1017.17~20.04.1
    Published Updated
  2. CVE-2023-54051

    Medium · CVSS 6.8EPSS 0.21%Fix available

    net: do not allow gso_size to be set to GSO_BY_FRAGS

    In the Linux kernel, the following vulnerability has been resolved: net: do not allow gso_size to be set to GSO_BY_FRAGS One missing check in virtio_net_hdr_to_skb() allowed syzbot to crash kernels again [1] Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff), because this magic value is used by the kernel. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute E

    • Update to 5.15.0-1020.20~20.04.1
    Published Updated
  3. CVE-2023-54050

    High · CVSS 7.8EPSS 0.2%Fix available

    ubifs: Fix memleak when insert_old_idx() failed

    In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memleak when insert_old_idx() failed Following process will cause a memleak for copied up znode: dirty_cow_znode zn = copy_znode(c, znode); err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) return ERR_PTR(err); // No one refers to zn. Fetch a reproducer in [Link]. Function copy_znode() is split into 2 parts: resource allocation and znode replacement, insert_old_idx() is split in similar way, so resource cleanup could be done in error handling path without corrupting metadata(mem & disk). It's okay that old index inserting is put be

    • Update to 5.15.0-1016.16~20.04.1
    Published Updated
  4. CVE-2023-54048

    High · CVSS 7.8EPSS 0.2%Fix available

    RDMA/bnxt_re: Prevent handling any completions after qp destroy

    In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Prevent handling any completions after qp destroy HW may generate completions that indicates QP is destroyed. Driver should not be scheduling any more completion handlers for this QP, after the QP is destroyed. Since CQs are active during the QP destroy, driver may still schedule completion handlers. This can cause a race where the destroy_cq and poll_cq running simultaneously. Snippet of kernel panic while doing bnxt_re driver load unload in loop. This indicates a poll after the CQ is freed.  [77786.481636] Call Trace: [77786.481640]  <TASK> [77786.481644]

    • Update to 5.15.0-1019.19~20.04.1
    Published Updated
  5. CVE-2023-54046

    High · CVSS 7.8EPSS 0.2%Fix available

    crypto: essiv - Handle EBUSY correctly

    In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Handle EBUSY correctly As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free.

    • Update to 5.15.0-1015.15~20.04.1
    Published Updated
  6. CVE-2023-54045

    Not ratedEPSS 0.28%Fix available

    audit: fix possible soft lockup in __audit_inode_child()

    In the Linux kernel, the following vulnerability has been resolved: audit: fix possible soft lockup in __audit_inode_child() Tracefs or debugfs maybe cause hundreds to thousands of PATH records, too many PATH records maybe cause soft lockup. For example: 1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n 2. auditctl -a exit,always -S open -k key 3. sysctl -w kernel.watchdog_thresh=5 4. mkdir /sys/kernel/debug/tracing/instances/test There may be a soft lockup as follows: watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498] Kernel panic - not syncing: softlockup: hung tasks Call trace: dump_backtrace+0x0/0x30c show_stac

    • Update to 5.15.0-1022.22~20.04.1
    Published Updated
  7. CVE-2023-54044

    Not ratedEPSS 0.28%Fix available

    spmi: Add a check for remove callback when removing a SPMI driver

    In the Linux kernel, the following vulnerability has been resolved: spmi: Add a check for remove callback when removing a SPMI driver When removing a SPMI driver, there can be a crash due to NULL pointer dereference if it does not have a remove callback defined. This is one such call trace observed when removing the QCOM SPMI PMIC driver: dump_backtrace.cfi_jt+0x0/0x8 dump_stack_lvl+0xd8/0x16c panic+0x188/0x498 __cfi_slowpath+0x0/0x214 __cfi_slowpath+0x1dc/0x214 spmi_drv_remove+0x16c/0x1e0 device_release_driver_internal+0x468/0x79c driver_detach+0x11c/0x1a0 bus_remove_driver+0xc4/0x124 driver_unregister+0x58/0x84 cleanup_module+

    • Update to 5.15.0-1016.16~20.04.1
    Published Updated
  8. CVE-2022-50736

    High · CVSS 7.1EPSS 0.19%Fix available

    RDMA/siw: Fix immediate work request flush to completion queue

    In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix immediate work request flush to completion queue Correctly set send queue element opcode during immediate work request flushing in post sendqueue operation, if the QP is in ERROR state. An undefined ocode value results in out-of-bounds access to an array for mapping the opcode between siw internal and RDMA core representation in work completion generation. It resulted in a KASAN BUG report of type 'global-out-of-bounds' during NFSoRDMA testing. This patch further fixes a potential case of a malicious user which may write undefined values for completion queue

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  9. CVE-2022-50735

    Medium · CVSS 5.1EPSS 0.24%Fix available

    wifi: mt76: do not run mt76u_status_worker if the device is not running

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: do not run mt76u_status_worker if the device is not running Fix the following NULL pointer dereference avoiding to run mt76u_status_worker thread if the device is not running yet. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mt76 mt76u_tx_status_data RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 0

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  10. CVE-2022-50732

    High · CVSS 8.8EPSS 0.42%Fix available

    staging: rtl8192u: Fix use after free in ieee80211_rx()

    In the Linux kernel, the following vulnerability has been resolved: staging: rtl8192u: Fix use after free in ieee80211_rx() We cannot dereference the "skb" pointer after calling ieee80211_monitor_rx(), because it is a use after free.

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  11. CVE-2022-50730

    Low · CVSS 0EPSS 0.24%Fix available

    ext4: silence the warning when evicting inode with dioread_nolock

    In the Linux kernel, the following vulnerability has been resolved: ext4: silence the warning when evicting inode with dioread_nolock When evicting an inode with default dioread_nolock, it could be raced by the unwritten extents converting kworker after writeback some new allocated dirty blocks. It convert unwritten extents to written, the extents could be merged to upper level and free extent blocks, so it could mark the inode dirty again even this inode has been marked I_FREEING. But the inode->i_io_list check and warning in ext4_evict_inode() missing this corner case. Fortunately, ext4_evict_inode() will wait all extents converting finis

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  12. CVE-2022-50729

    Low · CVSS 2.3EPSS 0.24%Fix available

    ksmbd: Fix resource leak in ksmbd_session_rpc_open()

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix resource leak in ksmbd_session_rpc_open() When ksmbd_rpc_open() fails then it must call ksmbd_rpc_id_free() to undo the result of ksmbd_ipc_id_alloc().

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  13. CVE-2022-50728

    Not ratedEPSS 0.28%Fix available

    s390/lcs: Fix return type of lcs_start_xmit()

    In the Linux kernel, the following vulnerability has been resolved: s390/lcs: Fix return type of lcs_start_xmit() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  14. CVE-2022-50727

    Not ratedEPSS 0.24%Fix available

    scsi: efct: Fix possible memleak in efct_device_init()

    In the Linux kernel, the following vulnerability has been resolved: scsi: efct: Fix possible memleak in efct_device_init() In efct_device_init(), when efct_scsi_reg_fc_transport() fails, efct_scsi_tgt_driver_exit() is not called to release memory for efct_scsi_tgt_driver_init() and causes memleak: unreferenced object 0xffff8881020ce000 (size 2048): comm "modprobe", pid 465, jiffies 4294928222 (age 55.872s) backtrace: [<0000000021a1ef1b>] kmalloc_trace+0x27/0x110 [<000000004c3ed51c>] target_register_template+0x4fd/0x7b0 [target_core_mod] [<00000000f3393296>] efct_scsi_tgt_driver_init+0x18/0x50 [efct] [<00000000115de533>]

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  15. CVE-2022-50725

    Not ratedEPSS 0.24%Fix available

    media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init()

    In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Fix use-after-free in vidtv_bridge_dvb_init() KASAN reports a use-after-free: BUG: KASAN: use-after-free in dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core] Call Trace: ... dvb_dmxdev_release+0x4d5/0x5d0 [dvb_core] vidtv_bridge_probe+0x7bf/0xa40 [dvb_vidtv_bridge] platform_probe+0xb6/0x170 ... Allocated by task 1238: ... dvb_register_device+0x1a7/0xa70 [dvb_core] dvb_dmxdev_init+0x2af/0x4a0 [dvb_core] vidtv_bridge_probe+0x766/0xa40 [dvb_vidtv_bridge] ... Freed by task 1238: dvb_register_device+0x6d2/0xa70 [dvb_core] dvb_dmxdev_init+0x2af/0x4a0 [dvb_core]

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  16. CVE-2022-50724

    Not ratedEPSS 0.26%Fix available

    regulator: core: fix resource leak in regulator_register()

    In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix resource leak in regulator_register() I got some resource leak reports while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 100, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@64/regulators/buck1 unreferenced object 0xffff88810deea000 (size 512): comm "490-i2c-rt5190a", pid 253, jiffies 4294859840 (age 5061.046s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff a0 1e 00 a1 ff ff ff ff ..

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  17. CVE-2022-50719

    High · CVSS 7.8EPSS 0.23%Fix available

    ALSA: line6: fix stack overflow in line6_midi_transmit

    In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: fix stack overflow in line6_midi_transmit Correctly calculate available space including the size of the chunk buffer. This fixes a buffer overflow when multiple MIDI sysex messages are sent to a PODxt device.

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  18. CVE-2022-50718

    Low · CVSS 2EPSS 0.24%Fix available

    drm/amdgpu: fix pci device refcount leak

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix pci device refcount leak As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from amdgpu_device_resume|suspend_display_audio(), pci_dev_put() is called to avoid refcount leak.

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated
  19. CVE-2022-50716

    Medium · CVSS 5.4EPSS 0.28%Fix available

    wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out

    In the Linux kernel, the following vulnerability has been resolved: wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out syzkaller reported use-after-free with the stack trace like below [1]: [ 38.960489][ C3] ================================================================== [ 38.963216][ C3] BUG: KASAN: use-after-free in ar5523_cmd_tx_cb+0x220/0x240 [ 38.964950][ C3] Read of size 8 at addr ffff888048e03450 by task swapper/3/0 [ 38.966363][ C3] [ 38.967053][ C3] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.0.0-09039-ga6afa4199d3d-dirty #18 [ 38.968464][ C3] Hardware name: QEMU Standard PC (i440FX + PIIX,

    • Update to 5.15.0-1014.14~20.04.1
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →