PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux-azure-6.8 in the last 30 days: 758. Listed in the KEV catalogue: 0.
Vulnerabilities: 9975
In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while le
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize abort state updates dw_edma_abort_interrupt() drops vc.lock before changing request and status. issue_pending() can acquire the lock in that small window, observe the old busy state, and skip starting queued descriptors. Then the abort handler overwrites the channel status as idle, leaving the new descriptors stranded for good. Keep descriptor completion and the state transition in the same critical section.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update channel state without holding vc.lock, while the interrupt handlers update the same state under it. Take the same lock around those state checks so that request, status, and configured stay consistent. For example, pause() can observe EDMA_ST_BUSY right before the interrupt handler completes the final descriptor and moves the channel to EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No further interrupt will acknowledge the request, and since issue_pending() re
In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: Keep link pointers valid on realloc failure meson_card_reallocate_links() grows the DAI link and private data arrays with two consecutive krealloc() calls and updates the owner pointers only after both calls have succeeded. A successful krealloc() may move the data: it frees the old block and returns a new one. When that happens for the link array and the second krealloc() then fails, card->dai_link still points to the block that krealloc() already freed, and the error path frees the new block too. The probe error path then calls meson_card_clean_references(),
In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Propagate sdma_txinit_ahg() errors set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg(). If sdma_txinit_ahg() fails, it returns before initializing tx->txreq. However, set_txreq_header_ahg() ignores the error and returns the AHG change count, causing the caller to continue processing the request as though initialization had succeeded. Propagate sdma_txinit_ahg() failures to the caller and abort request processing when initialization fails. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_s
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc() When its_irq_gic_domain_alloc() fails, the following its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the corresponding interrupt, which leaks the resource. Invoke its_vpe_teardown() in the error handling path to avoid the leak. [ tglx: Massaged change log ]
In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are consumed directly with nla_get_u32(). The top-level policy validates only the container, so it does not establish the fixed shape of each child. Require every child payload to be exactly one u32 before reading it.
In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: validate MADT IOAPIC entry bounds The IOAPIC hotplug lookup parses both MADT and _MAT records directly. The MADT walk previously used a subtable's declared length to advance the cursor after only locating a generic header. The _MAT path likewise passed a generic header to the IOAPIC helper. Validate that a current record has a complete generic header, that its declared length is contained in the available record range, and that a typed IOAPIC record contains the full fixed IOAPIC body before reading its fields. Use the same relation for both MADT and _MA
In the Linux kernel, the following vulnerability has been resolved: ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root acpi_pci_root_add() assigns the freshly allocated root to device->driver_data before dmar_device_add() and pci_acpi_scan_root(). Both failure paths reach the end: label where root is kfree()'d, but only the pci_acpi_scan_root() path clears driver_data first. When dmar_device_add() fails during a hot-add, root is freed while device->driver_data still points at it. The ACPI core does not clear driver_data on attach failure, so a later acpi_pci_find_root() call may dereference this dangling pointer. acpi_
In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call.
In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix memory leak in bpf_jit_free When bpf_int_jit_compile() is called for subprograms, it returns early during the first pass (!prog->is_func || extra_pass is false), keeping ctx->offset alive for the subsequent extra pass. If JIT compilation fails for a later subprogram, the BPF core aborts and calls bpf_jit_free() to clean up the first subprogram. However, bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory leak of the JIT context offsets array. Fix this by adding the missing kfree(jit_data->ctx.offset) in bpf_jit_free().
In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix CEQ tasklet use-after-free on removal Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring through get_next_valid_eqe() and updates eq->dbrec through notify_eq(). erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ. free_irq() prevents another hard IRQ and waits for an in-flight handler, but it does not drain a tasklet that the handler already scheduled. The tasklet can therefore access eq->qbuf or eq->dbrec after erdma_eq_destroy() frees them. Clearing ce
In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: drain QP references after partial table insertion mana_table_store_ud_qp() publishes a QP at its send-queue id before inserting the receive-queue id, dropping the XArray lock between the two xa_insert_irq() calls. A concurrent completion handler can look up the QP and take a transient reference. When the second insertion fails, the rollback erased only the send-queue entry and returned, leaving both the initial table reference and the transient reference outstanding while RDMA core frees the QP, causing a use-after-free. Drain the reference as normal destruct
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use after free in ib_query_qp() When querying a QP via the netlink flow the only synchronization mechanism for the said QP is rdma_restrack_get(), meanwhile during the QP destroy path rdma_restrack_del() is called at the end of the ib_destroy_qp_user() function which is too late, since by then the vendor specific resources for said QP would already be destroyed, and till the rdma_restrack_del() is called this QP can still be accessed, which could cause the use after free below. Fix this by moving the rdma_restrack_begin_del() to the start of the ib_destroy_q
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user()
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via the netlink path the only synchronization mechanism for the said SRQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_srq_user(), which is too late, since by that point vendor-specific resources associated with the SRQ might already be freed. This can leave a short window where the SRQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_srq
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in counter_release() When accessing a counter via the netlink path the only synchronization mechanism for the said counter is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of counter_release(), which is too late, since by that point vendor-specific resources associated with the counter might already be freed. This can leave a short window where the counter remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_free_cq() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_free_cq(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of the vendor-specific resources
Check your installed stack and versions against the current vulnerability feeds.