of/overlay: don't leak fragment references when changeset init fails
In the Linux kernel, the following vulnerability has been resolved:
of/overlay: don't leak fragment references when changeset init fails
init_overlay_changeset() stores the number of initialized fragments
in ovcs->count only on full success. When find_target() or the
__symbols__ lookup fails partway through, the target and overlay
references taken for the fragments initialized so far are never
dropped: free_overlay_changeset() bounds its cleanup loop by
ovcs->count, which is still 0.
Store the running count on the error path so free_overlay_changeset()
puts whatever was set up. The store is guarded by ovcs->fragments
because on the allocat
wifi: wfx: validate MIB read length before copying to caller
In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: validate MIB read length before copying to caller
wfx_hif_read_mib() copies reply->length bytes from the firmware
response into the caller-provided buffer without checking that
reply->length does not exceed val_len. A firmware response with
a length field larger than expected overruns the caller buffer and
reads past the end of the reply allocation.
Replace the dead -ENOMEM check with an active validation that
reply->length fits within val_len before the memcpy.
wifi: mac80211: drop oversized fragments to avoid extra_len overflow
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop oversized fragments to avoid extra_len overflow
In ieee80211_rx_h_defragment(), fragment payloads are accumulated into
entry->extra_len as subsequent fragments arrive:
entry->extra_len += rx->skb->len;
When the final fragment arrives, the head fragment is dequeued, and
pskb_expand_head() is called with entry->extra_len to ensure sufficient
tailroom for all queued fragments before copying:
if (skb_tailroom(rx->skb) < entry->extra_len) {
if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len,
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: reject short WMI command responses
ath9k_wmi_rsp_callback() removes the validated WMI header and copies
the number of bytes expected by the waiting command into its response
buffer. A device response shorter than that expectation can therefore
be read beyond the skb payload.
Record -EMSGSIZE for a short response, complete the waiter, and return
the stored status from the command path. This also prevents callers from
consuming stale response bytes as a successful reply.
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch.
rtc: ac100: Fix clock provider use-after-free on probe failure
In the Linux kernel, the following vulnerability has been resolved:
rtc: ac100: Fix clock provider use-after-free on probe failure
ac100_rtc_register_clks() registers the RTC-32k clock with
clk_hw_register_fixed_rate() and the clock provider with
of_clk_add_hw_provider(). Neither is device managed, and both are
released only from ac100_rtc_remove(). The driver core does not call
remove() when probe() fails: really_probe() reaches probe_failed below
the device_remove() call and goes straight to releasing the device's
managed resources.
ac100_rtc_probe() ends with
return devm_rtc_register_device(chip->rtc);
so if that fails after the cloc
rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe()
In the Linux kernel, the following vulnerability has been resolved:
rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe()
devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight
into clk_get_rate() without checking it for an error first, unlike the
"rtc" clock a few lines above which is correctly checked with
IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error
pointer:
if (!clk)
return 0;
...
rate = clk_core_get_rate_recalc(clk->core);
so if devm_clk_get() ever returns an error pointer here (for example
ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the
clkcfg clock-provide
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate TX status rate metadata
minstrel_ht_tx_status() converts the HT/VHT rate reported in a TX status
into a group and rate index and uses those to index the minstrel_ht rate
tables. The existing validation only checked that an entry was present
and had tries recorded; it did not check that the reported MCS, spatial
stream count and bandwidth are representable by the tables, so malformed
metadata passed to minstrel_ht_get_stats() or
minstrel_ht_ri_get_stats() could be used as an out-of-bounds index.
Validate the rate metadata in the common TX status pa
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: preserve hidden-group beacon IE ownership
A hidden-group probe-response entry borrows its beacon IEs from the
group's beacon entry. cfg80211_update_assoc_bss_entry() can pass such
an entry to cfg80211_update_known_bss() when merging scan entries
after a channel switch.
Copying the borrowed beacon_ies into the associated entry gives the
same allocation two owners. Releasing the group's beacon entry can
then leave the associated entry pointing to freed IEs, which are
freed again when that entry is released.
Skip beacon IE replacement when the source entry be
wifi: mac80211: prevent AP VLAN tx from other interfaces
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: prevent AP VLAN tx from other interfaces
Since the station lookup was factored out of ieee80211_build_hdr(),
ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN
frames, not only for control port frames. A unicast frame sent on one
interface thus matches a station of a different VLAN of the same BSS and
is transmitted to it.
Only match stations of the interface the frame is sent on, except for
control port frames, since those may be sent for VLAN stations directly
on the BSS interface.
blk-mq: set RQF_USE_SCHED when the operation is known
In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operati
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate DDC record lengths
Parse DDC record lengths in unsigned storage so 0xFF does not wrap.
Reject records smaller than the mandatory three-byte header, records
exceeding U8_MAX, and records exceeding remaining firmware bytes before
issuing Intel_Write_DDC.
This issue was reported by Claude Mythos.
bpf: Fix overflow of jump offset in constant blinding
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overflow of jump offset in constant blinding
bpf_jit_blind_insn() rewrites 'if rX op imm goto off' into:
AX = imm ^ rnd
AX ^= rnd
if rX op AX goto off
and subtracts 2 from off when the jump is backward. off is s16, so
-32767 and -32768 wrap and the jump goes 32767 insns forward, past the
end of the prog. The jump is inside the patch, hence bpf_adj_branches()
doesn't check it. The kernel crashes when such prog runs with
bpf_jit_harden=2.
Return -ERANGE in such case. bpf_jit_blind_constants() fails the same
way when blinding of other insns moves a jump out o
In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still refer
nvme: fix command effects log lifetime for multipath heads
In the Linux kernel, the following vulnerability has been resolved:
nvme: fix command effects log lifetime for multipath heads
KASAN reported a use-after-free when an I/O passthrough command was sent
through a multipath namespace head after the controller path that first
created the head had been removed:
BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core]
Read of size 4 at addr ffff888141b14400 by task nvme/19811
nvme_command_effects+0x192/0x200 [nvme_core]
nvme_cmd_allowed+0x7e/0x1b0 [nvme_core]
nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core]
nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core]
Move th
net/mctp: publish the mctp_dev only after it is initialised
In the Linux kernel, the following vulnerability has been resolved:
net/mctp: publish the mctp_dev only after it is initialised
mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev
is assigned, so a reader that picks the device up in that window
dereferences a net_device pointer that is still NULL:
KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7]
Call Trace:
<TASK>
? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49)
? __pfx_mctp_dst_output (net/mctp/route.c:41)
? selinux_socket_sendmsg (security/selinux/hooks.c:5278)
____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790
(discr
net/sched: cls_api: reclaim an empty proto on the error path
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: reclaim an empty proto on the error path
Two racing tc filter add requests on the same chain/prio of an
unlocked classifier both run change() on the shared proto and both
can fail: the winner's tcf_chain_tp_delete_empty() attempt gives up
because the loser's handle is still in the idr, and the loser's
error path drops only its own reference without a second reclamation
attempt. The empty proto stays linked in the chain, holding the
chain reference, a block reference and the classifier module
reference until the chain or block is torn down.
Reclaim the p
wifi: mac80211: fix slab-out-of-bounds read in ieee80211_monitor_select_queue()
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix slab-out-of-bounds read in ieee80211_monitor_select_queue()
ieee80211_monitor_select_queue() validates the skb length using skb->len
before dereferencing pointers into skb->data to access the 802.11 header.
However, skb->len includes data in both the linear head buffer and
non-linear fragments/pages. When AF_PACKET sends a packet large enough to
become non-linear, the 802.11 header at skb->data + len_rthdr may extend
past the linear head buffer even though skb->len appears sufficient.
This leads to a slab-out-of-bounds read when accessing hdr->frame_con
Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister
hci_unregister_dev() disables cmd_work and cmd_timer, then calls
hci_cmd_sync_clear(), whose cancel_work_sync() waits for
hci_cmd_sync_work() to return. That worker dequeues and runs every
entry on cmd_sync_work_list. With cmd_work disabled nothing reaches
the controller, so each queued HCI command waits the full
HCI_CMD_TIMEOUT (2s).
The backlog has no bound. Userspace can keep queuing MGMT commands
such as MGMT_OP_GET_CLOCK_INFO against a controller that doesn't
answer. Closing /dev/vhci then blocks in vhci_
net: systemport: Fix buffer overflow in bcm_sysport_get_stats()
In the Linux kernel, the following vulnerability has been resolved:
net: systemport: Fix buffer overflow in bcm_sysport_get_stats()
When running on SYSTEMPORT Lite, certain statistics are unsupported and
skipped during bcm_sysport_get_stats(). The variable 'j' tracks the
compacted index into the destination data buffer, whereas 'i' iterates
over all elements in bcm_sysport_gstrings_stats.
Because the buffer allocated by ethtool is sized only according to
bcm_sysport_get_sset_count(), storing values at data[i] instead of
data[j] writes past the allocated array bounds, leading to memory
corruption.
Fix this by writing to data[j] instead of