linux-ibm-6.8 vulnerabilities · Page 196

iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this

• Update to 6.8.0-1066.67~22.04.1

usb: typec: ucsi: ccg: reject firmware images without a ':' record header

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: reject firmware images without a ':' record header do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in c

• Update to 6.8.0-1066.67~22.04.1

usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data.

usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port

usb: typec: altmodes/displayport: validate count before reading Status Update VDO

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object.

• Update to 6.8.0-1066.67~22.04.1

usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte f

• Update to 6.8.0-1066.67~22.04.1

usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory.

• Update to 6.8.0-1066.67~22.04.1

usb: typec: ucsi: validate connector number in ucsi_connector_change()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencin

• Update to 6.8.0-1066.67~22.04.1

USB: serial: safe_serial: fix memory corruption with small endpoint

In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size.

• Update to 6.8.0-1066.67~22.04.1

USB: serial: cypress_m8: fix memory corruption with small endpoint

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size.

• Update to 6.8.0-1066.67~22.04.1

hpfs: fix a crash if hpfs_map_dnode_bitmap fails

In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash.

• Update to 6.8.0-1066.67~22.04.1

memfd: deny writeable mappings when implying SEAL_WRITE

In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done.

• Update to 6.8.0-1066.67~22.04.1

auxdisplay: line-display: fix OOB read on zero-length message_store()

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabl

• Update to 6.8.0-1066.67~22.04.1

Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return.

• Update to 6.8.0-1066.67~22.04.1

Bluetooth: HIDP: fix missing length checks in hidp_input_report()

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: fix missing length checks in hidp_input_report() hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic wit

• Update to 6.8.0-1066.67~22.04.1

Bluetooth: ISO: fix UAF in iso_recv_frame

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded.

• Update to 6.8.0-1066.67~22.04.1

Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ----

• Update to 6.8.0-1066.67~22.04.1

Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci

• Update to 6.8.0-1066.67~22.04.1

Input: xpad - fix out-of-bounds access for Share button

In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length.

• Update to 6.8.0-1066.67~22.04.1

parport: Fix race between port and client registration

In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b

• Update to 6.8.0-1066.67~22.04.1