linux-intel-iotg vulnerabilities · Page 191

PCI: Fix pci_slot_trylock() error handling

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix pci_slot_trylock() error handling Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()") delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in pci_slot_trylock(), but it forgets to remove the corresponding pci_dev_unlock() when pci_bus_trylock() fails. Before a4e772898f8b, the code did: if (!pci_dev_trylock(dev)) /* <- lock bridge device */ goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); /* <- unlock bridge device */ goto unlock; } } After a4e772

• Update to 5.15.0-1107.113

minix: Add required sanity checking to minix_check_superblock()

In the Linux kernel, the following vulnerability has been resolved: minix: Add required sanity checking to minix_check_superblock() The fs/minix implementation of the minix filesystem does not currently support any other value for s_log_zone_size than 0. This is also the only value supported in util-linux; see mkfs.minix.c line 511. In addition, this patch adds some sanity checking for the other minix superblock fields, and moves the minix_blocks_needed() checks for the zmap and imap also to minix_check_super_block(). This also closes a related syzbot bug report.

• Update to 5.15.0-1107.113

media: mtk-mdp: Fix error handling in probe function

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

• Update to 5.15.0-1107.113

drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set()

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation.

• Update to 5.15.0-1107.113

dpaa2-switch: validate num_ifs to prevent out-of-bounds write

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs

• Update to 5.15.0-1107.113

ASoC: qcom: q6asm: drop DSP responses for closed data streams

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams.

atm: fore200e: fix use-after-free in tasklets during device removal

In the Linux kernel, the following vulnerability has been resolved: atm: fore200e: fix use-after-free in tasklets during device removal When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | for

• Update to 5.15.0-1107.113

fbdev: vt8500lcdfb: fix missing dma_free_coherent()

In the Linux kernel, the following vulnerability has been resolved: fbdev: vt8500lcdfb: fix missing dma_free_coherent() fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached.

• Update to 5.15.0-1107.113

PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions struct configfs_item_operations callbacks are defined like the following: int (*allow_link)(struct config_item *src, struct config_item *target); void (*drop_link)(struct config_item *src, struct config_item *target); While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify the parameters in the correct order, pci_primary_epc_epf_unlink() and pci_secondary_epc_epf_unlink() specify the parameters in the wrong order, leading to the below kernel crash when using t

• Update to 5.15.0-1107.113

tcp: fix potential race in tcp_v6_syn_recv_sock()

In the Linux kernel, the following vulnerability has been resolved: tcp: fix potential race in tcp_v6_syn_recv_sock() Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock() is done too late. After tcp_v4_syn_recv_sock(), the child socket is already visible from TCP ehash table and other cpus might use it. Since newinet->pinet6 is still pointing to the listener ipv6_pinfo bad things can happen as syzbot found. Move the problematic code in tcp_v6_mapped_child_init() and call this new helper from tcp_v4_syn_recv_sock() before the ehash insertion. This allows the removal of one tcp_sync_mss(), since tcp_v4_syn_recv_sock() w

• Update to 5.15.0-1108.114

soc: ti: pruss: Fix double free in pruss_clk_mux_setup()

In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put().

• Update to 5.15.0-1107.113

net: consume xmit errors of GSO frames

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 *

• Update to 5.15.0-1107.113

netfilter: xt_tcpmss: check remaining length before reading optlen

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_tcpmss: check remaining length before reading optlen Quoting reporter: In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads op[i+1] directly without validating the remaining option length. If the last byte of the option field is not EOL/NOP (0/1), the code attempts to index op[i+1]. In the case where i + 1 == optlen, this causes an out-of-bounds read, accessing memory past the optlen boundary (either reading beyond the stack buffer _opt or the following payload).

• Update to 5.15.0-1107.113

xfs: delete attr leaf freemap entries when empty

In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can

• Update to 5.15.0-1107.113

ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helpe

• Update to 5.15.0-1106.112

ksmbd: fix signededness bug in smb_direct_prepare_negotiation()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix signededness bug in smb_direct_prepare_negotiation() smb_direct_prepare_negotiation() casts an unsigned __u32 value from sp->max_recv_size and req->preferred_send_size to a signed int before computing min_t(int, ...). A maliciously provided preferred_send_size of 0x80000000 will return as smaller than max_recv_size, and then be used to set the maximum allowed alowed receive size for the next message. By sending a second message with a large value (>1420 bytes) the attacker can then achieve a heap buffer overflow. This fix replaces min_t(int, ...) with min_t(u32

• Update to 5.15.0-1106.112

rnbd-srv: Zero the rsp buffer before using it

In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions.

• Update to 5.15.0-1107.113

media: cx25821: Fix a resource leak in cx25821_dev_setup()

In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix a resource leak in cx25821_dev_setup() Add release_mem_region() if ioremap() fails to release the memory region obtained by cx25821_get_resources().

• Update to 5.15.0-1107.113

media: ccs: Avoid possible division by zero

In the Linux kernel, the following vulnerability has been resolved: media: ccs: Avoid possible division by zero Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this.

• Update to 5.15.0-1107.113

net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue be

• Update to 5.15.0-1107.113