linux-nvidia-tegra vulnerabilities · Page 143

ksmbd: run set info with opener credentials

In the Linux kernel, the following vulnerability has been resolved: ksmbd: run set info with opener credentials SMB2 SET_INFO handlers call path-based VFS helpers after checking the access mask granted to the SMB handle. Those helpers perform their owner, inode permission and LSM checks using the current ksmbd worker credentials. Run the complete SET_INFO dispatch with the credentials captured when the handle was opened. This also removes the separate security information credential setup and keeps all SET_INFO classes under one credential scope. Direct override_creds() is used because it can nest with the request credential overrides alr

ksmbd: use opener credentials for delete-on-close

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for delete-on-close Delete-on-close can be completed by deferred or durable handle teardown, where no request work is available. Both the base-file unlink and the ADS xattr removal consequently run with the ksmbd worker credentials and can bypass filesystem permission checks. Run both operations with the credentials captured in struct file when the handle was opened. This preserves the authenticated user's fsuid, fsgid, supplementary groups and capability restrictions at final close.

ksmbd: use opener credentials for ADS I/O

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for ADS I/O Alternate data streams are stored as xattrs. Unlike regular file I/O, their read and write paths therefore call VFS xattr helpers which recheck inode permissions and LSM policy using the current task credentials. Run ADS I/O with the credentials captured when the SMB handle was opened.

ksmbd: track the connection owning a byte-range lock

In the Linux kernel, the following vulnerability has been resolved: ksmbd: track the connection owning a byte-range lock SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then ac

• Update to 5.15.0-1070.72

ksmbd: validate NTLMv2 response before updating session key

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Rele

smb/client: fix chown/chgrp with SMB3 POSIX Extensions

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix chown/chgrp with SMB3 POSIX Extensions Ownership (chown) and group (chgrp) modifications were being ignored when mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or CIFS_MOUNT_MODE_FROM_SID were also explicitly set. Fix this by checking for posix_extensions in cifs_setattr_nounix() when updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map and set the ownership/group information on the server.

smb: client: Fix next buffer leak in receive_encrypted_standard()

In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix next buffer leak in receive_encrypted_standard() receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer.

• Update to 5.15.0-1070.72

smb: client: harden POSIX SID length parsing

In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely.

• Update to 5.15.0-1070.72

smb: client: mask server-provided mode to 07777 in modefromsid

In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path.

• Update to 5.15.0-1070.72

writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()

In the Linux kernel, the following vulnerability has been resolved: writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs() When a container exits, the following BUG_ON() is occasionally triggered: ================================================================== VFS: Busy inodes after unmount of sdb (ext4) ------------[ cut here ]------------ kernel BUG at fs/super.c:695! CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1 pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : generic_shutdown_super+0xf0/0x100 lr : generic_shutdown_super+0xf0/0x100 Call trace: generic_shutdown_super+0xf

proc: protect ptrace_may_access() with exec_update_lock (FD links)

In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link().

• Update to 5.15.0-1070.72

sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run du

• Update to 5.15.0-1070.72

cpufreq: Fix hotplug-suspend race during reboot

In the Linux kernel, the following vulnerability has been resolved: cpufreq: Fix hotplug-suspend race during reboot During system reboot, cpufreq_suspend() is called via the kernel_restart() -> device_shutdown() path. Unlike the normal system suspend path, the reboot path does not call freeze_processes(), so userspace processes and kernel threads remain active. This allows CPU hotplug operations to run concurrently with cpufreq_suspend(). The original code has no synchronization with CPU hotplug, leading to a race condition where governor_data can be freed by the hotplug path while cpufreq_suspend() is still accessing it, resulting in a nu

• Update to 5.15.0-1070.72

cpufreq: pcc: fix use-after-free and double free in _OSC evaluation

In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOC

• Update to 5.15.0-1070.72

proc: protect ptrace_may_access() with exec_update_lock (part 1)

In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (part 1) Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock

• Update to 5.15.0-1070.72

posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function.

• Update to 5.15.0-1070.72

HID: multitouch: fix out-of-bounds bit access on mt_io_flags

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_dev

• Update to 5.15.0-1070.72

HID: appleir: fix UAF on pending key_up_timer in remove()

In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key

• Update to 5.15.0-1070.72

HID: lg-g15: cancel pending work on remove to fix a use-after-free

In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and th

• Update to 5.15.0-1070.72

hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length

In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes

• Update to 5.15.0-1070.72