p PatchFirst

PatchFirst · Latest vulnerabilities

linux-nvidia-tegra vulnerabilities · Page 192

Vulnerabilities published for linux-nvidia-tegra in the last 30 days: 488. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 9053

  1. CVE-2026-43148

    Medium · CVSS 5.5EPSS 0.13%Fix available

    powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()

    In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() As kcalloc() may fail, check its return value to avoid a NULL pointer dereference when passing it to of_property_read_u32_array().

    • Update to 5.15.0-1064.66
  2. CVE-2026-43147

    Medium · CVSS 5.5EPSS 0.1%Fix available

    Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"

    In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs $ echo 1 > /sys/bus/pci/devices/<pf>/remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acqu

    • Update to 5.15.0-1064.66
  3. CVE-2026-43145

    Medium · CVSS 5.5EPSS 0.12%Fix available

    remoteproc: imx_rproc: Fix invalid loaded resource table detection

    In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Fix invalid loaded resource table detection imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded resource table even when the current firmware does not provide one. When the device tree contains a "rsc-table" entry, priv->rsc_table is non-NULL and denotes where a resource table would be located if one is present in memory. However, when the current firmware has no resource table, rproc->table_ptr is NULL. The function still returns priv->rsc_table, and the remoteproc core interprets this as a valid loaded resource table. Fix this by

    • Update to 5.15.0-1064.66
  4. CVE-2026-43143

    Medium · CVSS 5.5EPSS 0.13%No fix published

    mfd: core: Add locking around 'mfd_of_node_list'

    In the Linux kernel, the following vulnerability has been resolved: mfd: core: Add locking around 'mfd_of_node_list' Manipulating a list in the kernel isn't safe without some sort of mutual exclusion. Add a mutex any time we access / modify 'mfd_of_node_list' to prevent possible crashes.

  5. CVE-2026-43141

    High · CVSS 7.1EPSS 0.13%Fix available

    ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut

    In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

    • Update to 5.15.0-1064.66
  6. CVE-2026-43140

    Medium · CVSS 5.5EPSS 0.13%Fix available

    HID: magicmouse: Do not crash on missing msc->input

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device.

    • Update to 5.15.0-1064.66
  7. CVE-2026-43139

    High · CVSS 8.6EPSS 0.38%Fix available

    xfrm6: fix uninitialized saddr in xfrm6_get_saddr()

    In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm

    • Update to 5.15.0-1064.66
    Published Updated
  8. CVE-2026-43136

    Medium · CVSS 5.5EPSS 0.13%Fix available

    HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()

    In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

    • Update to 5.15.0-1064.66
  9. CVE-2026-43135

    Medium · CVSS 5.5EPSS 0.12%Fix available

    media: cx23885: Add missing unmap in snd_cx23885_hw_params()

    In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Add missing unmap in snd_cx23885_hw_params() In error path, add cx23885_alsa_dma_unmap() to release the resource acquired by cx23885_alsa_dma_map().

    • Update to 5.15.0-1064.66
  10. CVE-2026-43134

    High · CVSS 8.1EPSS 0.12%Fix available

    Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

    • Update to 5.15.0-1064.66
    Published Updated
  11. CVE-2026-43133

    High · CVSS 7.9EPSS 0.13%Fix available

    KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation

    In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

    • Update to 5.15.0-1064.66
    Published Updated
  12. CVE-2026-43132

    Medium · CVSS 5.5EPSS 0.13%Fix available

    dm-verity: correctly handle dm_bufio_client_create() failure

    In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

    • Update to 5.15.0-1064.66
  13. CVE-2026-43130

    Medium · CVSS 5.5EPSS 0.12%Fix available

    iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode

    In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_fl

    • Update to 5.15.0-1064.66
  14. CVE-2026-43126

    High · CVSS 7.8EPSS 0.16%No fix published

    ALSA: mixer: oss: Add card disconnect checkpoints

    In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly.

    Published Updated
  15. CVE-2026-43124

    Medium · CVSS 5.5EPSS 0.13%Fix available

    pstore: ram_core: fix incorrect success return when vmap() fails

    In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

    • Update to 5.15.0-1064.66
  16. CVE-2026-43123

    Medium · CVSS 5.7EPSS 0.13%Fix available

    fbcon: check return value of con2fb_acquire_newinfo()

    In the Linux kernel, the following vulnerability has been resolved: fbcon: check return value of con2fb_acquire_newinfo() If fbcon_open() fails when called from con2fb_acquire_newinfo() then info->fbcon_par pointer remains NULL which is later dereferenced. Add check for return value of the function con2fb_acquire_newinfo() to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE.

    • Update to 5.15.0-1064.66
  17. CVE-2025-71274

    High · CVSS 7.8EPSS 0.1%Fix available

    rpmsg: core: fix race in driver_override_show() and use core helper

    In the Linux kernel, the following vulnerability has been resolved: rpmsg: core: fix race in driver_override_show() and use core helper The driver_override_show function reads the driver_override string without holding the device_lock. However, the store function modifies and frees the string while holding the device_lock. This creates a race condition where the string can be freed by the store function while being read by the show function, leading to a use-after-free. To fix this, replace the rpmsg_string_attr macro with explicit show and store functions. The new driver_override_store uses the standard driver_set_override helper. Since t

    • Update to 5.15.0-1064.66
    Published Updated
  18. CVE-2025-71273

    Medium · CVSS 5.5EPSS 0.16%No fix published

    wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()

    In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band() Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*").

    Published Updated
  19. CVE-2025-71272

    Medium · CVSS 5.5EPSS 0.16%No fix published

    most: core: fix resource leak in most_register_interface error paths

    In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev()

    Published Updated
  20. CVE-2026-43119

    Medium · CVSS 5.5EPSS 0.11%No fix published

    Bluetooth: hci_sync: annotate data-races around hdev->req_status

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_se

    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →