KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save
MAPC with V=0 drops ite->collection but leaves the ITE on the device's
ITT list, and vgic_its_save_ite() dereferences it unconditionally. A
guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the
host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it.
That sequence is UNPREDICTABLE per the architecture, but KVM already
handles the resulting state in the translate, MOVI and DISCARD paths.
Save a zeroed entry, which vgic_its_restore_ite() reads back as
invalid. Skipping the ITE in
LoongArch: KVM: Free init resources if kvm_init() fails
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Free init resources if kvm_init() fails
kvm_loongarch_init() calls kvm_loongarch_env_init() to allocate the
per-CPU kvm_context (vmcs) and kvm_loongarch_ops and to register the
perf callbacks, and then calls kvm_init(). If kvm_init() fails its
result is returned directly, but since module_init() does not run the
module_exit() stuff on failure, so kvm_loongarch_env_exit() is never
called and those resources are leaked.
So call kvm_loongarch_env_exit() when kvm_init() fails, matching the
teardown-on-failure pattern used by riscv_kvm_init().
LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY
kvm_arch_prepare_memory_region() computes new->arch.flags, i.e. whether
a memslot is KVM_MEM_HUGEPAGE_CAPABLE or KVM_MEM_HUGEPAGE_INCAPABLE,
only for KVM_MR_CREATE and KVM_MR_MOVE, and returns early for every
other change. But the generic code allocates a zeroed memslot for every
change and never copies old->arch, so after a KVM_MR_FLAGS_ONLY update,
e.g. toggling KVM_MEM_LOG_DIRTY_PAGES for live migration, the active
memslot has arch.flags == 0.
With both flags clear, fault_supports_huge_mapping() falls thro
LoongArch: BPF: Refactor jump offset calculation in tail call
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Refactor jump offset calculation in tail call
The old macro-based jmp_offset calculation derives the jump distance
from a stale prior-pass code stride, which can lead to wrong branch
offsets and soft lockups under extra JIT passes.
Fix this by calculating the offset directly on the absolute target:
"ctx->offset[insn + 1] - ctx->idx".
To avoid a false 16-bit range check abort during size estimation, add
a "ctx->image == NULL" guard to inject a safe dummy offset.
LoongArch: Do not save/restore percpu base register in rethook trampoline
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Do not save/restore percpu base register in rethook trampoline
The rethook trampoline saves $r21 ($u0), the percpu base, into its frame
at entry and restores it at exit. Inbetween rethook_trampoline_handler()
may schedule via preempt_enable_notrace().
If the task migrates to another CPU, the frame's $r21 holds the old
CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until
the next user->kernel transition heals $r21, all this_cpu_*() accesses
(runqueues, RCU per-CPU data, timer tick programming, FPU ownership)
hit the wrong CPU's percpu area.
Und
LoongArch: Avoid preempt count underflow without probe
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Avoid preempt count underflow without probe
LoongArch uses break 11 for the breakpoint placed after an instruction
that Kprobes executes out of line. Since userspace can issue the same
break instruction, do_bp() can reach kprobe_singlestep_handler() when
there is no current probe.
The handler actually returns false in this case, but it first calls
preempt_enable_no_resched(). The corresponding preempt_disable() is done
by kprobe_breakpoint_handler() on a real Kprobe hit, so it has not run
here. As a result, an ordinary userspace breakpoint (code 11) underflows
t
media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref
In the Linux kernel, the following vulnerability has been resolved:
media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref
airspy_disconnect() clears s->udev under v4l2_lock, but
airspy_stop_streaming() unconditionally calls airspy_ctrl_msg() and
airspy_free_stream_bufs() afterwards. If a streaming user closes the
device after disconnect, stop_streaming() runs and dereferences the
NULL s->udev:
airspy_stop_streaming()
airspy_ctrl_msg(s, CMD_RECEIVER_MODE, 0, 0, NULL, 0)
usb_sndctrlpipe(s->udev, 0) /* NULL deref */
airspy_free_stream_bufs(s)
usb_free_coherent(s->udev, ...) /* NULL
media: cec: core: Fix kmemleak due to missed rc_free_device() call
In the Linux kernel, the following vulnerability has been resolved:
media: cec: core: Fix kmemleak due to missed rc_free_device() call
The commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks") removed the implicit call to rc_free_device() from
rc_unregister_device(). However, the commit missed to remove the NULL
assignment of adap->rc that is now causing rc_free_device() to never be
called on an allocated rc device.
kmemleak reports following after e.g. dw-hdmi unbind:
unreferenced object 0xffff00010ac10000 (size 4096):
comm "kworker/u16:1", pid 39, jiffies 4294897739
hex dump (first 32 bytes):
20 23
media: cec: disable delayed work before freeing an interrupted transmit
In the Linux kernel, the following vulnerability has been resolved:
media: cec: disable delayed work before freeing an interrupted transmit
cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in
wait_for_completion_killable(). If that wait is interrupted by a signal,
cancel_delayed_work_sync() can run before the CEC kthread arms the reply
timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts().
The work is then armed after the cancel, and the data is freed with its
delayed_work still pending:
ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout
Use disable_delayed_work_sync(): it ca
In the Linux kernel, the following vulnerability has been resolved:
media: cec: Serialize exclusive follower delivery
cec_receive_notify() reads the exclusive follower pointer without the
adapter lock. Serialize the no-follower check and message delivery
against mode changes and release.
media: cedrus: fix memory leak in cedrus_init_ctrls()
In the Linux kernel, the following vulnerability has been resolved:
media: cedrus: fix memory leak in cedrus_init_ctrls()
In cedrus_init_ctrls(), the V4L2 control handler is initialized before
allocating memory for ctx->ctrls. If this allocation fails, the function
returns -ENOMEM without freeing the previously allocated handler
resources, leading to a memory leak.
Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation
failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet p
media: cobalt: Avoid freeing ALSA private data twice
In the Linux kernel, the following vulnerability has been resolved:
media: cobalt: Avoid freeing ALSA private data twice
snd_cobalt_card_create() stores cobsc in sc->private_data and installs
snd_cobalt_card_private_free() as sc->private_free. From that point,
snd_card_free(sc) releases cobsc through the ALSA card cleanup path.
If cobalt_alsa_init() fails after snd_cobalt_card_create(), the
err_exit_free path calls snd_card_free(sc) and then kfree(cobsc). That
second free releases the same object again.
Remove the explicit kfree(cobsc) and leave ownership with the ALSA card.
This issue was found by a static analysis checker and confirmed
media: cx231xx: reject geometry changes while the VBI queue is busy
In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: reject geometry changes while the VBI queue is busy
vidioc_s_fmt_vid_cap() and vidioc_s_std() change the device-wide
dev->width / dev->norm but only refuse the change when the *video* queue
(dev->vidq) is busy. The VBI queue (dev->vbiq) shares that same geometry:
cx231xx_init_vbi_isoc() latches dma_q->lines_per_field from dev->norm,
the VBI videobuf2 plane is sized from dev->width / dev->norm in
vbi_queue_setup() and vbi_buf_prepare(), and cx231xx_do_vbi_copy() then
recomputes the destination offset from the *live* dev->width and the
latched lines_per_field
media: cx23885: cancel NetUP CI work before teardown
In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: cancel NetUP CI work before teardown
netup_ci_exit() frees a netup_ci_state while its work item,
netup_read_ci_status(), may still be pending or running on the system
workqueue. The worker obtains the state with container_of() and
dereferences it, so it must not outlive the state.
netup_ci_init() queues the initial status read, and CI GPIO interrupts
subsequently queue the same work from netup_ci_slot_status(). During
remove, cx23885_finidev() calls free_irq() before the CI device is
unregistered. free_irq() prevents further IRQ handlers from running,
but d
In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: defer audio-only extension registration
The audio-only path registers extensions while probing the primary device.
For a dual-TS board, this happens before dev_next is created. The duplicate
device inherits is_audio_only and is then independently inserted into
em28xx_devlist.
The list is intended to contain only primary devices: extension operations
reach the secondary device through dev_next. The independently linked
secondary can be freed during disconnect while its list node remains
reachable, resulting in a use-after-free.
Defer audio-only extension reg
media: em28xx: fix use-after-free of dev_next->devlist on disconnect
In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix use-after-free of dev_next->devlist on disconnect
When a device with has_dual_ts=1 is probed and the is_audio_only path
is taken, both dev and dev->dev_next are added to the global
em28xx_devlist via em28xx_init_extension(). However, during disconnect,
em28xx_close_extension(dev) only calls list_del(&dev->devlist), leaving
dev->dev_next->devlist still linked in the global list. When dev_next is
subsequently freed via kref_put(), its devlist entry becomes a dangling
pointer in em28xx_devlist. The next device probe that calls
em28xx_init_extension() trigger
media: go7007: defer the ALSA v4l2 put until card release
In the Linux kernel, the following vulnerability has been resolved:
media: go7007: defer the ALSA v4l2 put until card release
go7007_snd_init() already takes a v4l2_device reference for the ALSA
side, but go7007_snd_remove() drops it immediately after calling
snd_card_free_when_closed().
That is too early when a userspace process still has the capture PCM open.
The ALSA card and its PCM callbacks remain alive until the last file is
closed, so the release path can still reach struct go7007 through
pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path
has freed the object.
Move the matching v4l2_device_put() to the ALS
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov02a10: fix endpoint parsing use-after-free
The ov02a10_check_hwcfg() function calls fwnode_handle_put(ep)
immediately after allocating and parsing the endpoint. However, it
subsequently calls fwnode_property_read_u32() using the same 'ep'
handle, leading to a potential use-after-free.
Additionally, reading the optional 'ovti,mipi-clock-voltage' property
used to overwrite the 'ret' variable. If the property was missing,
'ret' would become negative, and this failure code would be incorrectly
returned at the end of the function, causing probe to fail entirely.
media: i2c: ov7740: fix use-after-destroy in remove
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov7740: fix use-after-destroy in remove
The ov7740_remove() function had a severe teardown order bug where it
destroyed the driver's mutex before freeing the V4L2 control handler
which relies on that mutex, leading to a use-after-destroy kernel panic.
Furthermore, the driver explicitly called v4l2_ctrl_handler_free() and
mutex_destroy() sequentially, but then called ov7740_free_controls()
which invokes both of them a second time, resulting in a double-free.
This patch fixes the issue by unregistering the subdevice first, and
relying exclusively on ov7740_free_c
media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup
In the Linux kernel, the following vulnerability has been resolved:
media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup
Add the missing sanity check after looking up the SCP to avoid
dereferencing a NULL-pointer in case its driver has not yet been bound.