usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
genelink_rx_fixup() splits an aggregated RX frame into its individual
packets, using a per-packet length taken from device-supplied data. That
length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared
against how many bytes were actually received.
A malicious GeneLink (GL620A) device can therefore send a short URB whose
header claims packet_count > 1 and a first packet of up to 1514 bytes.
skb_put_data(gl_skb, packet->packet_data, size);
then copies past the end of the receive buffer and hands
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. A
In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, match
bridge: cfm: reject invalid CCM interval at configuration time
In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink pol
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
A
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Fix potential UAF when ddgst mismatch
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_u
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path
In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected,
nvmet_req_uninit() is called unconditionally. However, if the command
arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init()
had returned false and percpu_ref_tryget_live() was never executed. The
unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a
refcount underflow, leading to a WARNING in
percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and
eventually a permanent workqueue deadlock
fs/ntfs3: validate lcns_follow in log_replay conversion
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate lcns_follow in log_replay conversion
log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY
records when replaying version 0 restart tables.
During this conversion, the memmove() length is derived directly from
the on-disk lcns_follow field:
memmove(&dp->vcn, &dp0->vcn_low,
2 * sizeof(u64) +
le32_to_cpu(dp->lcns_follow) * sizeof(u64));
check_rstbl() validates restart table structure, but does not constrain
per-entry lcns_follow values relative to the entry size. A malformed
filesystem image can provide an oversized lcns_follow value
fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and
UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove
destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`,
where e->view.data_off comes from an on-disk NTFS_DE inside
an INDEX_ROOT or INDEX_BUFFER. Neither case validates
view.data_off + dlen against e->size; the existing
check_if_index_root / check_if_alloc_index helpers walk the
entry chain and validate the entry's offset, but not its
internal view fields.
The neighbouring read
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: reject oversized nested action attrs
Open vSwitch stores generated flow actions as nlattrs, whose nla_len
field is u16. Commit a1e64addf3ff ("net: openvswitch: remove
misbehaving actions length check") allowed the total sw_flow_actions
stream to grow beyond 64 KiB, which is valid, but also removed the last
guard preventing a generated nested action attribute from exceeding
U16_MAX.
An oversized generated container can thus be closed with a truncated
nla_len. A later dump or teardown then walks a structurally different
stream than the one that was validate
In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
crypto: qat - remove unused character device and IOCTLs
In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PI
drm/hyperv: validate VMBus packet size in receive callback
In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate VMBus packet size in receive callback
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single swit
drm/hyperv: validate resolution_count and fix WIN8 fallback
In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 bran
userfaultfd: gate must_wait writability check on pte_present()
In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered a
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreo