linux-xilinx-zynqmp vulnerabilities · Page 196

net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

• Update to 5.15.0-1075.79

ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside ic

• Update to 5.15.0-1074.78

ip6_tunnel: clear skb2->cb[] in ip4ip6_err()

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data,

• Update to 5.15.0-1074.78

net: use skb_header_pointer() for TCPv4 GSO frag_off check

In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzka

net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

• Update to 5.15.0-1075.79

crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks,

• Update to 5.15.0-1074.78

NFC: pn533: bound the UART receive buffer

In the Linux kernel, the following vulnerability has been resolved: NFC: pn533: bound the UART receive buffer pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN.

• Update to 5.15.0-1075.79

bpf: Fix regsafe() for pointers to packet

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug.

• Update to 5.15.0-1075.79

netfilter: x_tables: ensure names are nul-terminated

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change.

• Update to 5.15.0-1075.79

netfilter: nf_conntrack_helper: pass helper to expect cleanup

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free

• Update to 5.15.0-1075.79

netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_

• Update to 5.15.0-1075.79

netfilter: ctnetlink: ignore explicit helper on new expectations

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ignore explicit helper on new expectations Use the existing master conntrack helper, anything else is not really supported and it just makes validation more complicated, so just ignore what helper userspace suggests for this expectation. This was uncovered when validating CTA_EXPECT_CLASS via different helper provided by userspace than the existing master conntrack helper: BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0 Read of size 4 at addr ffff8880043fe408 by task poc/102 Call Trace: nf_ct_expect_related_report

netfilter: nf_tables: reject immediate NF_QUEUE verdict

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue.

• Update to 5.15.0-1075.79

Bluetooth: MGMT: validate LTK enc_size on load

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state.

• Update to 5.15.0-1075.79

bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().

In the Linux kernel, the following vulnerability has been resolved: bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready(). syzbot reported use-after-free of AF_UNIX socket's sk->sk_socket in sk_psock_verdict_data_ready(). [0] In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() is called after dropping its unix_state_lock(). Although the sender socket holds the peer's refcount, it does not prevent the peer's sock_orphan(), and the peer's sk_socket might be freed after one RCU grace period. Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops under RCU in sk_psock_verdict_data_ready(). [0]: BU

net: macb: fix clk handling on PCI glue driver removal

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix clk handling on PCI glue driver removal platform_device_unregister() may still want to use the registered clks during runtime resume callback. Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free on rmmod") that addressed the similar problem of clk vs platform device unregistration but just moved the bug to another place. Save the pointers to clks into local variables for reuse after platform device is unregistered. BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60 Read of size 8 at addr ffff888104f85e00 by task modprobe/597 CPU: 2 P

• Update to 5.15.0-1075.79

net: macb: properly unregister fixed rate clocks

In the Linux kernel, the following vulnerability has been resolved: net: macb: properly unregister fixed rate clocks The additional resources allocated with clk_register_fixed_rate() need to be released with clk_unregister_fixed_rate(), otherwise they are lost.

• Update to 5.15.0-1075.79

net/x25: Fix potential double free of skb

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_bac

• Update to 5.15.0-1074.78

bpf: Fix incorrect pruning due to atomic fetch precision tracking

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix incorrect pruning due to atomic fetch precision tracking When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as a destination, thus receiving the old value from the memory location. The current backtracking logic does not account for this. It treats atomic fetch operations the same as regular stores where the src register is only an input. This leads the backtrack_insn to fail to propagate precision to the stack location, which is then not marked as precise! Later, the verifier's p

drm/ioc32: stop speculation on the drm_compat_ioctl path

In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list.

• Update to 5.15.0-1075.79