Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID
Copy the content of a Periodic Advertisement Report to BASE only if
the service UUID is Basic Audio Announcement Service UUID.
KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails
Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the
nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and
vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could
re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page.
Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure
KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request
is cleared on VM-Exit (including the "forced" case), i.e. there is no risk
In the Linux kernel, the following vulnerability has been resolved:
audit: fix exe mark UAF in kill_rules()
kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit
tree is pruned. It drops entry->rule.exe before removing the rule from
the RCU-visible filter lists.
After a rule has been installed with AUDIT_ADD_RULE, which requires
CAP_AUDIT_CONTROL, removing the watched directory can race with another
task that is still evaluating the rule. In that case, fsnotify can free
the executable mark before the reader reaches audit_mark_compare(),
causing a use-after-free.
KASAN reports:
BUG: KASAN: slab-use-after-free in audit
HID: multitouch: stop the release timer from being rearmed on remove
In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: stop the release timer from being rearmed on remove
mt_remove() quiesces the sticky-finger timer before stopping the
hardware:
timer_delete_sync(&td->release_timer);
sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
hid_hw_stop(hdev);
timer_delete_sync() waits for a running callback and dequeues the timer,
but it does not stop the timer from being armed again. The transport is
still delivering reports at that point, and the report path rearms it:
if (app->quirks & MT_QUIRK_STICKY_FINGERS) {
if (td->mt_io_flags & MT_IO_SLO
In the Linux kernel, the following vulnerability has been resolved:
ipvs: bound LBLCR and LBLC cache growth
ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for
every previously unseen destination address. The table max_size only
tells the periodic collector to reclaim entries after the cache has
already exceeded the limit. It does not reclaim entries that the
attacker continues to use.
Reject new cache entries once either table reaches max_size * 3 / 2.
The extra headroom lets the periodic collector catch up while the
existing scheduler fallback continues to use the selected destination
when cache creation fails. New traffic th
kprobes: Skip disarmed probes when checking optkprobe overlap
In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip disarmed probes when checking optkprobe overlap
On x86, an optkprobe at A replaces five bytes with a jump. If a disabled
probe B is at A+2, get_optimized_kprobe() stops at B when arming a new
probe C at A+4. It leaves A optimized:
A A+1 A+2 A+3 A+4
A's jump | e9 | d0 | d1 | d2 | d3 |
after C | e9 | d0 | d1 | d2 | cc |
The INT3 for C overwrites the last byte of A's jump displacement, so
execution can jump to the wrong address. B can have prepared optinsns
while disarmed, but has no jump to unoptimize.
Continue past disarmed and unp
of/overlay: put property on deadprops only after changeset add succeeds
In the Linux kernel, the following vulnerability has been resolved:
of/overlay: put property on deadprops only after changeset add succeeds
add_changeset_property() links a new property of a not-yet-live
target node into the node's deadprops list before handing it to
of_changeset_add_property(). If that fails, the error path frees the
property but leaves the freed pointer linked in deadprops, and
of_node_release() frees it a second time when the aborted overlay's
node is released.
Record the changeset entry first and link the property into deadprops
only on success. of_changeset_add_property() never looks at the
node's property lists, so t
of/overlay: only treat a positive changeset id as registered
In the Linux kernel, the following vulnerability has been resolved:
of/overlay: only treat a positive changeset id as registered
of_overlay_fdt_apply() stores the idr_alloc() return value in
ovcs->id before checking it. On failure the stored id is negative,
free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove()
is called with a negative id and list_del() runs on ovcs->ovcs_list,
which is not initialized until after the id allocation. An allocation
failure at that point dereferences NULL.
Make free_overlay_changeset() treat only a strict-positive id as
registered. The rest of the function already copes with a
partially-initia
In the Linux kernel, the following vulnerability has been resolved:
net: gso: limit recursive IP-in-IP segmentation
IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment()
for each nested IP header. encap_level tracks header bytes, not callback
depth, so a deep chain can exhaust the kernel stack. Making
inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP
GSO/TSO later made the path reachable. The IPv6 stackable path was
introduced separately and uses the same guard.
Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once
per top-level GSO operation and preserved across GRE/UDP context changes.
Us
netfilter: nft_flow_offload: drop flowtable reference on init error path
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_flow_offload: drop flowtable reference on init error path
nft_flow_offload_init() bumps the flowtable use count with
nft_use_inc() before calling nf_ct_netns_get(). When the latter
fails, the error is returned as-is and the reference is leaked.
The upper layers do not balance it either: nf_tables_newexpr()
clears expr->ops when the expression init callback fails, so the
nft_expr_more() iteration in nft_rule_expr_deactivate() and
nf_tables_rule_destroy() stops right before the failed expression
and its ->destroy callback, which would drop the reference, neve
In the Linux kernel, the following vulnerability has been resolved:
net/packet: prevent TX_RING byte count overflow
tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds
each valid packet length to the signed int len_sum. Userspace can
recycle completed frames concurrently, so a single blocking send call
is not bounded by the ring size.
After enough successful transmissions len_sum wraps into the negative
range. In particular, 65536 65535-byte frames followed by a 65007-byte
frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats
that as an impossible return and triggers a BUG. On systems configured
to panic on
rtc: spear: initialize IRQ state before requesting alarm IRQ
In the Linux kernel, the following vulnerability has been resolved:
rtc: spear: initialize IRQ state before requesting alarm IRQ
devm_request_irq() enables the interrupt before it returns, so the handler
may run while probe is still initializing the device. Initialize the MMIO
address and spinlock before requesting the alarm IRQ.
sctp: check RCV_SHUTDOWN after the sendmsg connect wait
In the Linux kernel, the following vulnerability has been resolved:
sctp: check RCV_SHUTDOWN after the sendmsg connect wait
sctp_wait_for_connect() drops the socket lock while it sleeps. An
out-of-the-blue ABORT can then be processed from the socket backlog and
unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets
RCV_SHUTDOWN, the waiter breaks with err == 0 before checking
asoc->base.dead. Its final sctp_association_put() can then free the
association, leaving sctp_sendmsg_to_asoc() to continue with a dangling
pointer.
Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc()
before using the association again.
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load
of struct vc_data pointer in vcs_write() to avoid UAF") sits after the
'if (ret)' block, so the copy-failure break path exits the loop without
reloading vc. If the vc was kfree()'d via vc_port_destruct during the
unlocked copy_from_user() window, the post-loop
'if (written && vc) vcs_scr_updated(vc)' is reached with a stale
non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen:
fix null-ptr-deref in vcs_notifier() du
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In the Linux kernel, the following vulnerability has been resolved:
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In paste_selection(), the loop copies min_t(unsigned int,
vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into
tty_ldisc_receive_buf() and increments pasted += count.
Because the selection mutex (vc_sel.lock) is dropped inside the loop
Whenever the line discipline buffer fills up and paste_selection()
sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl
can replace vc_sel.buffer with a shorter selection and reduce
vc_sel.buf_len below pasted.
When paste_
vt: skip screen update for DEC alignment test on backgroup consoles
In the Linux kernel, the following vulnerability has been resolved:
vt: skip screen update for DEC alignment test on backgroup consoles
[BUG]
Recently, we encountered a KASAN warning as follows:
BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140
Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239
CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
Call Trace:
<TASK>
...
kasan_report+0xf0/0x120
fb_pad_aligned_buffer+0x11f/0x140
ccw_putcs+0x86c/0xa80
fbcon_putcs+0x338/0x410
do_update_reg
ALSA: caiaq: unregister the input device when probe fails
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: unregister the input device when probe fails
setup_card() registers the input device, whose name and phys point into
struct snd_usb_caiaqdev, and then goes on to snd_card_register() and
snd_usb_caiaq_control_init(). If either fails, snd_probe() calls
snd_card_free(), which frees the device state but leaves the input
device registered: card_free() only clears the pointer, and the input
device is unregistered from snd_disconnect() alone. Reading its "uevent"
attribute afterwards dereferences freed memory:
BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0
In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: reject oversized playback packets
Each playback URB is handed a slice of out.buffer that is exactly
LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT
endpoint, but the number of bytes written into that slice is never
compared against it.
submit_audio_out_urb() takes the frame count from prev_fsize, which
audio_in_callback() derived from the *IN* endpoint's received packet
length, and rescales it with the playback frame size; when prev_fsize is
still zero it synthesizes a length from the sample rate instead. On a
device declaring a large IN wMa
In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it.
In the Linux kernel, the following vulnerability has been resolved:
mtd: core: call _get_device() with the master MTD
__get_mtd_device() calls the master's _get_device() callback with mtd,
which may be a partition. __put_mtd_device() passes the master.
This breaks gluebi partitions because gluebi_get_device() uses
container_of() and therefore requires the master MTD. Pass the master
to _get_device(), matching _put_device().