mptcp: pm: fix memory leak from alloc-during-teardown race
In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: fix memory leak from alloc-during-teardown race
mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.
A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy()
HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event()
In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event()
magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack
two touch reports into one, by splitting the packet and calling itself on
each half. The only guard against runaway recursion is a "size < 1" check,
which stops zero-sized calls but does not bound the recursion depth.
A malicious HID device that matches this driver can send a report starting
with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level
consumes two bytes and recurses on the remainder, so an incoming
HID: magicmouse: do not keep a stale msc->input if no input is claimed
In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: do not keep a stale msc->input if no input is claimed
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not
HID: core: fix OOB read of field->usage in hid_set_field()
In the Linux kernel, the following vulnerability has been resolved:
HID: core: fix OOB read of field->usage in hid_set_field()
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
k
HID: pidff: fix OOB write when hid->inputs is empty
In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: fix OOB write when hid->inputs is empty
hid_pidff_init_with_quirks() derives its input_dev from
list_entry(hid->inputs.next, struct hid_input, list)
without first checking that hid->inputs is non-empty. The list member
of struct hid_input is at offset 0, so on an empty list list_entry()
yields &hid->inputs itself and the following hidinput->input load reads
an unrelated member of struct hid_device. dev is then a type-confused
pointer, and force-feedback init writes through it: each
set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of
the o
net/ionic: avoid OOB TX partner lookup for hwstamp RXQ
In the Linux kernel, the following vulnerability has been resolved:
net/ionic: avoid OOB TX partner lookup for hwstamp RXQ
The dedicated hardware timestamp RX queue is allocated with q->index
equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only
contains the regular queue pairs, so using that index to set rxq->partner
can read one entry past txqcqs[] and then write through the derived
pointer.
Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp
RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue
has no TX partner.
In the Linux kernel, the following vulnerability has been resolved:
futex/pi: Reject cross-mm private futex owners
A private futex key borrows the waiter's mm without taking an mm_users
reference. Nevertheless, attach_to_pi_owner() currently accepts an owner
from a different address space and copies the private key into the owner's
PI state.
When that owner exits, exit_pi_state_list() uses the saved key to find the
hash bucket and acquires a reference to the waiter's private hash. If the
last user of the waiter's mm exits concurrently, futex_hash_free() frees
the hash while the owner still uses its bucket and reference.
Prevent this by va
In the Linux kernel, the following vulnerability has been resolved:
futex/pi: Plug private futex exec() race
The check for private futexes whether the waiter's mm, which is stored in
the futex_key and copied into the pi_state, is the same as the owner's mm
is not sufficient for exec(). exec() has a gap where the mm check fails to
give the correct answer:
exec()
...
exec_release_mm()
futex_exec_release()
tsk::futex::exit_state = EXITING;
cleanup_robust_list();
1) tsk::futex::exit_state = OK;
...
old_mm = tsk::mm;
2) tsk::mm = ->mm;
Between #1 and #2 the check for the mm is wrong as that mm is abo
futex: Fix race in futex_pivot_pending() during private hash resize
In the Linux kernel, the following vulnerability has been resolved:
futex: Fix race in futex_pivot_pending() during private hash resize
A task performing a custom private hash resize can remain blocked in
uninterruptible sleep indefinitely. The hung-task detector reports:
INFO: task futex-resizer:314 blocked for more than 10 seconds.
task:futex-resizer state:D stack:14824 pid:314 tgid:312 ppid:311
Call Trace:
__schedule+0x521/0xf30
schedule+0x22/0xa0
futex_hash_allocate+0x3db/0x490
__do_sys_prctl+0x6f5/0xbd0
do_syscall_64+0xf9/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: hung_task:
futex: Fix race on the initial mm->futex.phash.ref allocation
In the Linux kernel, the following vulnerability has been resolved:
futex: Fix race on the initial mm->futex.phash.ref allocation
futex_hash_allocate() allocates mm->futex.phash.ref without any locking.
Commit d9b05321e21e ("futex: Move futex_hash_free() back to __mmput()")
moved the allocation here and assumed that the process has just a single
thread at this point.
Commit ee9dce44362b ("futex: Drop CLONE_THREAD requirement for private
default hash alloc") widened need_futex_hash_allocate_default() to cover
any CLONE_VM clone, but left out vfork because the parent is suspended and
cannot race.
That no longer holds once vfork is nested. I
In the Linux kernel, the following vulnerability has been resolved:
HID: asus: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue.
HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()
In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler()
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a repo
HID: nintendo: register input device after capabilities are set
In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: register input device after capabilities are set
input_register_device() exposes the device to userspace immediately.
In joycon_input_create() it was called before joycon_config_rumble()
configures the FF_RUMBLE capability and the memless force-feedback
device, so a concurrent EVIOCSFF could dereference a NULL dev->ff.
Registering early also means the initial udev event lacks button and
axis information, which can make input managers ignore the device.
Move input_register_device() to the end of joycon_input_create(), after
all capabilities, the IMU input de
HID: nintendo: stop device IO before hid_hw_stop on probe failure
In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: stop device IO before hid_hw_stop on probe failure
nintendo_hid_probe() calls hid_device_io_start() before joycon_init()
and joycon_leds_create(). If either fails, the error path jumps to
err_close which calls hid_hw_close()/hid_hw_stop() without first calling
hid_device_io_stop().
hid_hw_stop() does not stop device IO, so hid_input_report() may still
run and access driver data that is being torn down, resulting in a
use-after-free.
Add an err_io_stop label that calls hid_device_io_stop() before
hid_hw_close(), and point the two post-io_start error paths a
In the Linux kernel, the following vulnerability has been resolved:
HID: rapoo: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the
alternative would be to provide a simple stub implementation on !USB_HID
builds.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the i
HID: ft260: fix stack-use-after-return write in I2C read race
In the Linux kernel, the following vulnerability has been resolved:
HID: ft260: fix stack-use-after-return write in I2C read race
ft260_i2c_read() points dev->read_buf at a caller-supplied buffer
(often an on-stack variable), arms a completion and waits up to five
seconds for the device to return the data. The HID input callback
ft260_raw_event() runs in the input/IRQ path, independent of the
dev->lock mutex held by the read path, and copies the device-supplied
payload into dev->read_buf after a plain NULL check.
These two paths share read_buf, read_idx and read_len with no
serialization. If the device delays its response until the read
ti
HID: sensor: custom: Fix use-after-free in enable_sensor
In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix use-after-free in enable_sensor
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
HID: uclogic: fix use-after-free of inrange_timer on remove
In the Linux kernel, the following vulnerability has been resolved:
HID: uclogic: fix use-after-free of inrange_timer on remove
uclogic_remove() cancels the pen in-range timer and then stops the
device:
timer_delete_sync(&drvdata->inrange_timer);
hid_hw_stop(hdev);
timer_delete_sync() only guarantees the timer is idle at that instant.
uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop()
stops the transport several lines later, and every report with
pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:
mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));
A report landing between the tim
In the Linux kernel, the following vulnerability has been resolved:
HID: hyperv: validate initial device info bounds
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed t
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix LE list UAF on reset
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)