Bluetooth: ISO: zero the sockaddr before returning it in getname
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: zero the sockaddr before returning it in getname
iso_sock_getname() fills a struct sockaddr_iso in place and returns its
size without clearing it first, so bytes it does not write are copied to
user space from the kernel stack. The getsockname(2) and getpeername(2)
paths both run through do_getsockname(), which hands getname() an
uninitialized sockaddr_storage on the stack and copies back up to the
number of bytes getname() returns, so the driver has to initialize every
byte it accounts for.
Two ranges are left uninitialized:
- struct sockaddr_iso is 10
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: reject HCI_CMD_SYNC params_len above 255
mgmt_hci_cmd_sync() checks that the message length agrees with params_len
but puts no upper bound on it. params_len is __le16 while the parameter
length in the HCI command header is a u8:
struct hci_command_hdr {
__le16 opcode;
__u8 plen;
} __packed;
hci_cmd_sync_alloc() assigns one to the other:
hdr->plen = plen;
if (plen)
skb_put_data(skb, param, plen);
so a params_len of 256 leaves plen at 0 while all 256 bytes are still
appended. The frame handed to the driver then declares no parameters and
carrie
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_aml: validate firmware segment lengths
aml_download_firmware() reads two lengths from the firmware header and
uses them to build pointers before checking that the header and segment
data are present. A truncated or inconsistent firmware image can make
the driver read past firmware->data while constructing TCI commands.
Reject images shorter than the header and ensure that the ICCM and DCCM
ranges fit within the loaded firmware before downloading either segment.
futex: Avoid private hash use-after-free on final put
In the Linux kernel, the following vulnerability has been resolved:
futex: Avoid private hash use-after-free on final put
futex_private_hash_put() drops the reference to fph before evaluating
fph->mm for wake_up_var(). futex_ref_put() enables preemption again before
returning. If that put drops the final reference and the task is preempted,
another task can pivot to the replacement hash and free the old hash after
an RCU grace period. The first task then reads fph->mm from the freed
allocation when it resumes.
KASAN reports a slab-use-after-free in futex_private_hash_put(), with the
read at offset 24 in a freed kmalloc-512 allocation. The
selinux: reject a class permission count below its inherited common
In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a class permission count below its inherited common
security_get_permissions() maps an inherited common's permissions into
an array sized by the class's own permissions.nprim, but class_read()
takes that nprim verbatim from the policy image and never checks that it
covers the common. A class that inherits a common of N permissions while
declaring a smaller nprim is accepted, and on load the common's
permissions are written past the class-sized array -- an out-of-bounds
heap write.
Reject a class whose permission count is below its inherited common's.
Well-
selinux: do not cancel a policy conversion that never started
In the Linux kernel, the following vulnerability has been resolved:
selinux: do not cancel a policy conversion that never started
sel_write_load() calls selinux_policy_cancel() when sel_make_policy_nodes()
fails, and that helper dereferences the outgoing policy to cancel its
sidtab conversion. On the first policy load there is no outgoing policy:
security_load_policy() returns early for that case, before it converts
anything, and state->policy is still NULL. A first load that fails while
building the selinuxfs tree therefore takes a NULL dereference in
selinux_policy_cancel(), reached from a write(2) to /sys/fs/selinux/load.
Skip the cance
selinux: reject a permission value exceeding the class permission count
In the Linux kernel, the following vulnerability has been resolved:
selinux: reject a permission value exceeding the class permission count
perm_read() bounds a permission value by SEL_VEC_MAX but never by the
nprim of the owning class or common, which is taken verbatim from the
policy image. security_get_permissions() then writes perms[value - 1]
into an nprim-sized kcalloc() array, so a class declaring fewer
permissions than its largest permission value drives an out-of-bounds
heap write. The top-level symbol tables are validated this way; the
nested per-class permission table is not.
Reject a permission whose value exceeds nprim, whic
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
During F55 sensor detection, the transmitter (TX) electrode count was
incorrectly assigned the value of the receiver (RX) electrode count
due to copy-paste typos.
This incorrect value was then propagated to the driver data and used
by F54 to determine the diagnostics report size. On devices with more
RX than TX electrodes, this inflated the perceived TX count, leading
to incorrect report size calculations and potential out-of-bounds
buffer accesses.
Fix the typos by correctly assigning the TX electrode count
ovpn: run deferred work on a module-owned workqueue
In the Linux kernel, the following vulnerability has been resolved:
ovpn: run deferred work on a module-owned workqueue
ovpn queues several work items whose callbacks execute module text.
These works currently run on the global system workqueues, so module
exit has no driver-owned drain point that guarantees the callbacks have
fully returned before the module text can be freed.
Object references protect the objects used by the callbacks, but they do
not prove that a workqueue function has returned. In particular, a
worker can drop the final reference that unblocks device teardown while
it is still executing ovpn code.
Add a module-owned w
In the Linux kernel, the following vulnerability has been resolved:
Input: psxpad-spi - set driver data before use
psxpad_spi_suspend() retrieves the controller state with
spi_get_drvdata(), but probe never stores it, so suspend dereferences a
NULL pointer. Store it during probe.
pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev()
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev()
mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop,
in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned
at the end of the loop body. On that first iteration, evaluating prev_o
reads an indeterminate value. If it is non-NULL, the condition
dereferences a stale or invalid pointer, potentially faulting or
incorrectly skipping the first OPP.
Initialize prev_o to NULL. This matches the intent as well: there is no
previous OPP to compare against on the first iteration.
Found
pmdomain: mediatek: fix remaining %pOF after of_node_put()
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: mediatek: fix remaining %pOF after of_node_put()
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when t
In the Linux kernel, the following vulnerability has been resolved:
drm/connector/hdmi: Fix out of bounds memory read
A helper function was copying a given audio infoframe into the
connector's copy but using the size of the destination (a generic
target, sized to accept many different data blocks) not the source (a
very specific type of data block). Thus, it was copying 60 bytes of
data from a 28 byte allocation.
Fix that by using the source size instead, together with a build bug
on the source size actually being smaller than the destination.
I hit this running KUnit tests under KASAN (while debugging something
else entirely). In the rea
mmc: loongson2: Fix sg iteration in data reorder functions
In the Linux kernel, the following vulnerability has been resolved:
mmc: loongson2: Fix sg iteration in data reorder functions
In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(),
the for_each_sg() macro already iterates over the scatterlist entries,
with 'sg' pointing to the current entry. However, the code incorrectly
uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats
'sg' as an array base and indexes it again, leading to access of
wrong sg entries (or out-of-bounds if the list is not an array).
drm/amdkfd: Add bounds check for CRAT subtype length
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add bounds check for CRAT subtype length
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
(cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d)
regulator: fp9931: Fix VPOS/VNEG voltage selector table
In the Linux kernel, the following vulnerability has been resolved:
regulator: fp9931: Fix VPOS/VNEG voltage selector table
The VPOSNEG_table[] mapping does not match the FP9931 datasheet.
The datasheet defines the VPOS/VNEG voltage mapping as:
00h-04h -> 7.04V (-7.04V)
05h -> 7.26V (-7.26V)
06h -> 7.49V (-7.49V)
...
28h-3Fh -> 15.06V (-15.06V)
However, VPOSNEG_table[] has two issues:
1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the
table has 6 entries of 7.04V, causing all subsequent entries to be
shifted by one position.
2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but
netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort path
In nft_flow_rule_offload_abort(), WARN_ON_ONCE(err) is triggered on every
error during rollback, including -ENOMEM. Memory allocation failures are
expected under low-memory conditions and do not indicate a kernel bug.
Trace for example:
nft_flow_offload_chain() // FLOW_BLOCK_BIND
nft_flow_block_chain()
nft_chain_offload_cmd()
nft_block_offload_cmd()
->ndo_setup_tc()
nsim_setup_tc()
flow_block_cb_setup_simple()
flow_block_cb_alloc() // fails to -ENO
ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers
In the Linux kernel, the following vulnerability has been resolved:
ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers
The irq handlers take a struct device pointer and call
dev_get_drvdata() to obtain the driver data. However, the driver
data is only set at the end of probe, after devm_request_irq(),
so an interrupt taken in between causes the handlers to pass a
NULL pointer to readl() and crash.
Pass the private data directly as the devm_request_irq() argument
instead of the device pointer, matching what the handlers expect.
af_packet: Don't send zero-byte data in tpacket_snd().
In the Linux kernel, the following vulnerability has been resolved:
af_packet: Don't send zero-byte data in tpacket_snd().
syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd():
skb_assert_len
WARNING: at include/linux/skbuff.h:2753 skb_assert_len
WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781
Call Trace:
<TASK>
dev_queue_xmit include/linux/netdevice.h:3448 [inline]
packet_xmit+0x243/0x310 net/packet/af_packet.c:276
tpacket_snd net/packet/af_packet.c:2907 [inline]
packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134
When sending 0-byte packets via TPACKET ring buffer on devices with no
hard
drm/log: Fix out-of-bounds read on empty message length
In the Linux kernel, the following vulnerability has been resolved:
drm/log: Fix out-of-bounds read on empty message length
drm_log_draw_kmsg_record() accesses s[len - 1] to strip the trailing
newline, but len is unsigned int. If len is 0, the subtraction wraps
to UINT_MAX, causing an out-of-bounds read.
Add an early return when len is 0.