linux vulnerabilities · Page 105

m68k: nfcon: Do not call console_is_registered() in nfcon_device()

In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered.

• Update to 7.0.0-42.42

bpf: Reject negative optlen in cgroup getsockopt hook

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-boun

• Update to 7.0.0-42.42

ksmbd: safely discard unregistered deferred locks

In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.

• Update to 7.0.0-42.42

ksmbd: detach blocked lock requests before freeing

In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mism

ksmbd: scope session state changes to bound connections

In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overw

• Update to 7.0.0-42.42

ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size

In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE acc

• Update to 7.0.0-42.42

smb/server: fix session leak in ksmbd_session_register()

In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails.

• Update to 7.0.0-42.42

NFSv4: remove callback IDR entry on client allocation failure

In the Linux kernel, the following vulnerability has been resolved: NFSv4: remove callback IDR entry on client allocation failure nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it finishes setting up the client. If any later initialization step fails, the error path frees the nfs_client directly with nfs_free_client(). That bypasses nfs_put_client(), which is where the callback IDR entry is removed during normal teardown. A failed allocation can therefore leave cb_ident_idr pointing at a freed nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the stale pointer and take a reference to it. Make the call

• Update to 7.0.0-42.42

pnfs/blocklayout: Fix device leaks on parse failure

In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are

• Update to 7.0.0-42.42

NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers

In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() b

• Update to 7.0.0-42.42

NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease().

• Update to 7.0.0-42.42

clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()

In the Linux kernel, the following vulnerability has been resolved: clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() devm_clk_get_optional_enabled_with_rate() registers its cleanup action before setting the clock rate. If setting the rate fails, it attempts to disable and unprepare a clock that was never enabled. This issue was spotted while reviewing "rust: clk: add devres-managed clks" [1]. Register the cleanup action only after successfully preparing and enabling the clock. [1]: https://lore.kernel.org/rust-for-linux/[email protected]

• Update to 7.0.0-42.42

bpf, xdp: move offload check into dev_xdp_install()

In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, d

• Update to 7.0.0-42.42

hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed

In the Linux kernel, the following vulnerability has been resolved: hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed Previously, hinic3_send_one_skb() cached the skb fragment count before calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to skb_checksum_help() for unsupported tunnel packets, the skb may be linearized. Continuing to build the TX descriptor with the stale fragment count leads to a descriptor mismatch, which can trigger out-of-bounds DMA reads or IOMMU faults. Furthermore, the old code ignored the return value of skb_checksum_help(), transmitting corrupted packets with incomplete c

• Update to 7.0.0-42.42

dpll: fix NULL deref in dpll_device_ops() during teardown race

In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the

net: kcm: Hold RCU read lock while running BPF parser

In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program.

• Update to 7.0.0-42.42

virtio_net: Fix resize of the RX ring

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256

• Update to 7.0.0-42.42

ipvs: fix integer overflow in ftp helper port/address parsing

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject val

• Update to 7.0.0-42.42

cuse: wait for pending RCU callbacks on module exit

In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release()

• Update to 7.0.0-42.42

fuse: check for NULL root inode in fuse_fill_super_submount

In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in

• Update to 7.0.0-42.42