p PatchFirst

PatchFirst · Latest vulnerabilities

linux-aws vulnerabilities · Page 168

Vulnerabilities published for linux-aws in the last 30 days: 333. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 5435

  1. CVE-2024-57976

    High · CVSS 7.8EPSS 0.27%No fix published

    btrfs: do proper folio cleanup when cow_file_range() failed

    In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when cow_file_range() failed [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444

    Published Updated
  2. CVE-2024-57975

    High · CVSS 7.8EPSS 0.26%No fix published

    btrfs: do proper folio cleanup when run_delalloc_nocow() failed

    In the Linux kernel, the following vulnerability has been resolved: btrfs: do proper folio cleanup when run_delalloc_nocow() failed [BUG] With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash with the following VM_BUG_ON_FOLIO(): BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28 BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28 page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664 aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774" flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|last

    Published Updated
  3. CVE-2024-57974

    Medium · CVSS 6.3EPSS 0.18%No fix published

    udp: Deal with race between UDP socket address change and rehash

    In the Linux kernel, the following vulnerability has been resolved: udp: Deal with race between UDP socket address change and rehash If a UDP socket changes its local address while it's receiving datagrams, as a result of connect(), there is a period during which a lookup operation might fail to find it, after the address is changed but before the secondary hash (port and address) and the four-tuple hash (local and remote ports and addresses) are updated. Secondary hash chains were introduced by commit 30fff9231fad ("udp: bind() optimisation") and, as a result, a rehash operation became needed to make a bound socket reachable again after a

    Published Updated
  4. CVE-2024-57973

    High · CVSS 8.1EPSS 0.67%No fix published

    rdma/cxgb4: Prevent potential integer overflow on 32bit

    In the Linux kernel, the following vulnerability has been resolved: rdma/cxgb4: Prevent potential integer overflow on 32bit The "gl->tot_len" variable is controlled by the user. It comes from process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an integer wrapping bug. Use size_add() to prevent this.

    Published Updated
  5. CVE-2022-49731

    Medium · CVSS 5.5EPSS 0.28%No fix published

    ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

    In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

    Published Updated
  6. CVE-2022-49729

    Medium · CVSS 5.5EPSS 0.27%No fix published

    nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

    In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred Similar to the handling of play_deferred in commit 19cfe912c37b ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling.

    Published Updated
  7. CVE-2022-49728

    Medium · CVSS 6.9EPSS 0.29%No fix published

    ipv6: Fix signed integer overflow in __ip6_append_data

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in __ip6_append_data Resurrect ubsan overflow checks and ubsan report this warning, fix it by change the variable [length] type to size_t. UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19 2147479552 + 8567 cannot be represented in type 'int' CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x214/0x230 show_stack+0x30/0x78 dump_stack_lvl+0xf8/0x118 dump_stack+0x18/0x30 ubsan_epilogue+0x18/0x60 handle_overflow+0xd0/0xf0 __ubsan_handle_add_overflow+0x

    Published Updated
  8. CVE-2022-49727

    Medium · CVSS 5.5EPSS 0.28%No fix published

    ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we can follow what udpv6 does and subtract the transhdrlen from the max.

    Published Updated
  9. CVE-2022-49725

    High · CVSS 7.8EPSS 0.3%No fix published

    i40e: Fix call trace in setup_tx_descriptors

    In the Linux kernel, the following vulnerability has been resolved: i40e: Fix call trace in setup_tx_descriptors After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add neti

    Published Updated
  10. CVE-2022-49712

    Medium · CVSS 5.5EPSS 0.26%No fix published

    usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer.

    Published Updated
  11. CVE-2022-49710

    Medium · CVSS 5.5EPSS 0.28%No fix published

    dm mirror log: round up region bitmap size to BITS_PER_LONG

    In the Linux kernel, the following vulnerability has been resolved: dm mirror log: round up region bitmap size to BITS_PER_LONG The code in dm-log rounds up bitset_size to 32 bits. It then uses find_next_zero_bit_le on the allocated region. find_next_zero_bit_le accesses the bitmap using unsigned long pointers. So, on 64-bit architectures, it may access 4 bytes beyond the allocated size. Fix this bug by rounding up bitset_size to BITS_PER_LONG. This bug was found by running the lvm2 testsuite with kasan.

    Published Updated
  12. CVE-2022-49708

    High · CVSS 7.1EPSS 0.28%No fix published

    ext4: fix bug_on ext4_mb_use_inode_pa

    In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on ext4_mb_use_inode_pa Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/mballoc.c:3211! [...] RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f [...] Call Trace: ext4_mb_new_blocks+0x9df/0x5d30 ext4_ext_map_blocks+0x1803/0x4d80 ext4_map_blocks+0x3a4/0x1a10 ext4_writepages+0x126d/0x2c30 do_writepages+0x7f/0x1b0 __filemap_fdatawrite_range+0x285/0x3b0 file_write_and_wait_range+0xb1/0x140 ext4_sync_file+0x1aa/0xca0 vfs_fsync_range+0xfb/0x260 do_fsync+0x48/0xa0 [...] =============

    Published Updated
  13. CVE-2022-49707

    Medium · CVSS 5.5EPSS 0.28%No fix published

    ext4: add reserved GDT blocks check

    In the Linux kernel, the following vulnerability has been resolved: ext4: add reserved GDT blocks check We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^r

    Published Updated
  14. CVE-2022-49700

    High · CVSS 7.8EPSS 0.29%No fix published

    mm/slub: add missing TID updates on slab deactivation

    In the Linux kernel, the following vulnerability has been resolved: mm/slub: add missing TID updates on slab deactivation The fastpath in slab_alloc_node() assumes that c->slab is stable as long as the TID stays the same. However, two places in __slab_alloc() currently don't update the TID when deactivating the CPU slab. If multiple operations race the right way, this could lead to an object getting lost; or, in an even more unlikely situation, it could even lead to an object being freed onto the wrong slab's freelist, messing up the `inuse` counter and eventually causing a page to be freed to the page allocator while it still contains sla

    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →