btrfs: fix reloc root cleanup in merge_reloc_roots()
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reloc root cleanup in merge_reloc_roots()
If the root we got has zero root refs in its root item, we are resetting
the root's ->reloc_root without using barriers like we do everywhere else.
Sashiko complained about this while reviewing another patch, and it's
correct (see the Link tag below).
Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless
the root points to the reloc root we have.
Fix this by using clear_reloc_root(), which issues the memory barrier
after setting the root's ->reloc_root to NULL and before clearing the bit
BTRFS_ROOT_D
wifi: iwlwifi: mvm: fix an off-by-1 boundary check
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix an off-by-1 boundary check
Before looking at the 11th byte, check the length is big enough.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: null RX pointers after free
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe.
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg->online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its p
smb/client: flush dirty data before punching a hole
In the Linux kernel, the following vulnerability has been resolved:
smb/client: flush dirty data before punching a hole
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate TX_CMD response layout
TX_CMD parsing uses frame_count to walk status entries and then
read the trailing SCD SSN. Make the minimum-length check follow
that exact runtime layout calculation before parsing the payload.
For new TX API, reject TX_CMD responses with frame_count != 1 and
warn/return in the aggregation handler to document that aggregated
accounting is expected via BA notifications.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a possible underflow
We shouldn't trust the firmware about the length of the wowlan packet.
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array.
wifi: iwlwifi: mvm: fix out-of-bounds tid_data access in BA notif
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix out-of-bounds tid_data access in BA notif
mvmsta->tid_data was indexed by the TFD loop counter 'i' instead of
the actual TID value 'tid'. This writes lq_color into a random tid_data
slot unrelated to the BA entry.
Since multi-TID blockack is not really in use, 'i' was always 0 and no
harm was done.
Add a out-of-bound check before accessing the array.
wifi: iwlwifi: bound aligned TLV advance in FW parser
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: bound aligned TLV advance in FW parser
Validate ALIGN(tlv_len, 4) against remaining parser length before
consuming bytes from the firmware image.
This avoids length underflow on malformed TLVs.
wifi: iwlwifi: acpi: validate WGDS table revision index
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: acpi: validate WGDS table revision index
Check tbl_rev bounds before BIT(tbl_rev) to avoid undefined shifts when
firmware reports an invalid revision value.
smb: client: bound dirent name against end of SMB response in cifs_filldir
In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound dirent name against end of SMB response in cifs_filldir
cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST /
FIND_NEXT response using a length (de.namelen) supplied by the server.
The kmalloc'd SMB response buffer is bounded, but nothing checks that
de.name + de.namelen still lies inside that buffer before the eventual
filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes.
A hostile SMB1 server that returns an oversized FileNameLength in a
directory entry therefore causes memchr() to read past the end of the
response slab
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: preserve VFS inherited POSIX ACL mask
The VFS initializes a child's POSIX ACL from the parent's default ACL and
the requested creation mode. Do not mutate the parent ACL or overwrite the
child's VFS-computed access and default ACLs afterwards.
This preserves restrictive ACL_MASK entries and prevents SMB object creation
from widening effective permissions.
In the Linux kernel, the following vulnerability has been resolved:
cifs: validate idmap key payload length
The cifs.idmap key type stores its payload length in key->datalen, which
is limited to U16_MAX. Accepting a larger key payload truncates the
recorded length and can make later users interpret the payload using
inconsistent bounds.
Reject oversized preparsed payloads before allocating or copying them.
This keeps key->datalen consistent with the stored data for both inline
and separately allocated idmap payloads.
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
The KASAN allocation trace shows that a malformed IE buffer is
stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any
validation. The crash trace shows that a subsequent SIOCSIWESSID
triggers a connection attempt which calls cfg80211_sme_get_conn_ies()
to process the stored IE buffer, causing:
- An out-of-bounds read in skip_ie() which reads ies[pos+1]
(the length byte) past the end of the 1-byte buffer.
- An integer underflow in the memcpy size argument when offs
returned by ieee80211_ie_split() exc
Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame
rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences
hdr->addr and hdr->ctrl without validating skb->len first. A truncated
frame with skb->len less than the minimum header size causes an
out-of-bounds read of uninitialized memory. Additionally, a zero-length
frame causes skb->len-- to underflow to UINT_MAX, making
skb_tail_pointer() read far past the buffer.
Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC
handlers") fixed the same class of missing-length-check bugs in the
In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi_eh_lock_door() is called from scsi_restart_operations() while the
host is still in the SHOST_RECOVERY state, i.e. before the host is
switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the
queues. It allocates a request via scsi_alloc_request() with no flags,
so blk_mq_get_tag() may block waiting for a free sched tag when all tags
are already in use.
Those tags can be held by commands that were just requeued by
scsi_eh_flush_done_q() during error handling. Such commands cannot be
dispatch
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data.
i2c: smbus: reject oversized block transfers in the common path
In the Linux kernel, the following vulnerability has been resolved:
i2c: smbus: reject oversized block transfers in the common path
The SMBus block transfer length data->block[0] is validated in
i2c_smbus_xfer_emulated() but that check runs too late for tracepoints
and is skipped entirely when the adapter provides a native smbus_xfer
implementation. This allows user-controlled oversized block lengths to
reach tracepoint memcpy calls and driver callbacks unchecked.
Add an early validation in __i2c_smbus_xfer() that rejects block
transfers whose caller-supplied length is zero or exceeds
I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driv