KVM: s390: Take srcu when importing watchpoint data
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Take srcu when importing watchpoint data
__import_wp_info() backs up the original guest memory contents of a
watchpoint with read_guest_abs(), which is kvm_read_guest() and therefore
resolves the memslot via __kvm_memslots(). That requires kvm->srcu (or
kvm->slots_lock) to be held, otherwise a concurrent memslot update can
free the memslots array under us once its SRCU grace period has elapsed.
As this is not fast path, following lock ordering (mutex first, then
srcu) take the big hammer and hold the srcu for the full import.
KVM: s390: Zero initialize data structures for inject_pfault_token
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Zero initialize data structures for inject_pfault_token
__kvm_inject_pfault_token() only sets .type and .u.ext.ext_params2 of
the on-stack struct kvm_s390_irq but the full ext substructure is copied
into the cpu local variable on inject. ext_params and pad contain stale
stack values.
Interrupt delivery only uses ext_params2, so nothing leaks to the guest,
but a host user can use the migration ioctls to get to the data.
Fix by zero-initializing the irq struct.
Do the same for the inti data structure.
media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref
In the Linux kernel, the following vulnerability has been resolved:
media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref
airspy_disconnect() clears s->udev under v4l2_lock, but
airspy_stop_streaming() unconditionally calls airspy_ctrl_msg() and
airspy_free_stream_bufs() afterwards. If a streaming user closes the
device after disconnect, stop_streaming() runs and dereferences the
NULL s->udev:
airspy_stop_streaming()
airspy_ctrl_msg(s, CMD_RECEIVER_MODE, 0, 0, NULL, 0)
usb_sndctrlpipe(s->udev, 0) /* NULL deref */
airspy_free_stream_bufs(s)
usb_free_coherent(s->udev, ...) /* NULL
media: cobalt: Avoid freeing ALSA private data twice
In the Linux kernel, the following vulnerability has been resolved:
media: cobalt: Avoid freeing ALSA private data twice
snd_cobalt_card_create() stores cobsc in sc->private_data and installs
snd_cobalt_card_private_free() as sc->private_free. From that point,
snd_card_free(sc) releases cobsc through the ALSA card cleanup path.
If cobalt_alsa_init() fails after snd_cobalt_card_create(), the
err_exit_free path calls snd_card_free(sc) and then kfree(cobsc). That
second free releases the same object again.
Remove the explicit kfree(cobsc) and leave ownership with the ALSA card.
This issue was found by a static analysis checker and confirmed
media: cx23885: cancel NetUP CI work before teardown
In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: cancel NetUP CI work before teardown
netup_ci_exit() frees a netup_ci_state while its work item,
netup_read_ci_status(), may still be pending or running on the system
workqueue. The worker obtains the state with container_of() and
dereferences it, so it must not outlive the state.
netup_ci_init() queues the initial status read, and CI GPIO interrupts
subsequently queue the same work from netup_ci_slot_status(). During
remove, cx23885_finidev() calls free_irq() before the CI device is
unregistered. free_irq() prevents further IRQ handlers from running,
but d
media: go7007: defer the ALSA v4l2 put until card release
In the Linux kernel, the following vulnerability has been resolved:
media: go7007: defer the ALSA v4l2 put until card release
go7007_snd_init() already takes a v4l2_device reference for the ALSA
side, but go7007_snd_remove() drops it immediately after calling
snd_card_free_when_closed().
That is too early when a userspace process still has the capture PCM open.
The ALSA card and its PCM callbacks remain alive until the last file is
closed, so the release path can still reach struct go7007 through
pcm->private_data and call go7007_snd_hw_free() after the V4L2 release path
has freed the object.
Move the matching v4l2_device_put() to the ALS
media: rc: sunxi-cir: Unregister rc device on probe failure
In the Linux kernel, the following vulnerability has been resolved:
media: rc: sunxi-cir: Unregister rc device on probe failure
After rc_register_device() succeeds, later probe failures must undo the
registration with rc_unregister_device(). The current error path jumps to
the allocation cleanup label and only calls rc_free_device(), leaving the
rc device registration and resources created by rc_register_device()
behind.
Add a registered-device unwind label for the IRQ lookup, IRQ request, and
hardware initialization failure paths. Keep rc_free_device() for failures
before rc_register_device() succeeds.
media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak
In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak
rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to
NULL before any pending streaming teardown has run. When user space
later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming()
which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases
each coherent buffer with:
usb_free_coherent(dev->udev, dev->buf_size,
dev->buf_list[dev->buf_num],
dev->dma_addr[dev->buf_num]);
usb_free_coherent() returns immediatel
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIO
media: s2255: bound JPEG frame size before copying into the buffer
In the Linux kernel, the following vulnerability has been resolved:
media: s2255: bound JPEG frame size before copying into the buffer
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfuncti
media: s2255: check firmware size before reading trailing marker
In the Linux kernel, the following vulnerability has been resolved:
media: s2255: check firmware size before reading trailing marker
s2255_probe() reads a 4-byte marker and version from the last 8 bytes
of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the
firmware file is shorter than 8 bytes, fw_size - 8 underflows and the
access reads out of bounds. Validate the firmware size before indexing.
media: saa7164: fix cleanup on resource allocation failure
In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: fix cleanup on resource allocation failure
saa7164_dev_setup() adds the device to the global saa7164_devlist before
requesting the PCI BAR memory regions.
If get_resources() fails, saa7164_dev_setup() decrements the device count
and returns an error, but leaves the device on saa7164_devlist. The probe
error path then frees the device, leaving a dangling entry on the global
list.
Reuse the existing MMIO mapping error path to remove the device from
saa7164_devlist and decrement the device count before returning.
Also release BAR0 if it was successfully requ
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE
(256-byte) bounce buffer obtained from dma_pool_alloc(), which does not
zero the allocation. They initialize only a few leading bytes before
handing the buffer to qla2x00_write_sfp().
qla2x00_write_sfp() can override the transfer length with a user-supplied
value:
if (len == 1)
opt |= BIT_0;
if (opt & BIT_0)
len = *sfp;
*sfp is the first byte of the (user-controlled) payload, so len can grow
up to 255. The device then DMA-reads len bytes f
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap bu
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the format 1 path, the virtual port is located on ha->vp_list while
holding vport_slock, but the lock is dropped before vp is used:
qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/
REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that
window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport
down and free it, leading to a use-after-free.
Take a vport reference (vref_count) under vport_slock when the matching
vp is found, and drop it after the last u
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
qla2x00_update_fru_versions() copies the user-supplied BSG request into
a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates
list->count times over the qla_image_version array embedded in that
buffer, advancing the image pointer each iteration. count is taken
directly from user input with no upper bound, while only (DMA_POOL_SIZE
- sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries
actually fit. A larger count walks the image pointer off the end of the
stack buffer, reading ad
scsi: qla2xxx: Serialize flash version read in reset handler
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path.
scsi: qla2xxx: Fix cs84xx use-after-free on host teardown
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix cs84xx use-after-free on host teardown
qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via
__qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran
before scsi_remove_host(), which is what removes the 84xx_fw_version host
sysfs attribute. A concurrent read of that attribute in the window between
the two calls executes qla24xx_84xx_fw_version_show(), which dereferences
the freed ha->cs84xx, resulting in a use-after-free.
Move qla84xx_put_chip() to after scsi_remove_host() in both
qla2x00_remove_one() and qla2x00_
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
The mbx_cmd_t is allocated on the stack but left uninitialized.
qla2x00_mailbox_command() has several early-return paths (PCI permanent
failure, device failed, EEH busy, ISP abort pending, mailbox access
timeout, purge mbox) that return without writing the input mailbox
registers back into mcp->mb[]. qla2x00_get_firmware_state() then
unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's
states[] array regardless of the return value.
On such a failure the copied values are uninitialized kernel
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In qla2x00_status_entry(), the FWI2 status path advances sense_data and
shrinks par_sense_len by rsp_info_len:
if (IS_FWI2_CAPABLE(ha)) {
sense_data += rsp_info_len;
par_sense_len -= rsp_info_len;
}
rsp_info_len is a 32-bit value taken directly from the target's FCP
response (sf.rsp_data_len), while par_sense_len is the IOCB data area
size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target
reporting an rsp_info_len larger than par_sense_len makes the unsigned
subtraction underflow to a hug