PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux in the last 30 days: 243. Listed in the KEV catalogue: 0.
Vulnerabilities: 4483
In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can lead to partial reads while the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address similar to route_shortcircuit which already does the right thing.
In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists.
In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is ze
In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong
In the Linux kernel, the following vulnerability has been resolved: net/sched: fq: add overflow bounds to quantum and initial quantum fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 * psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill loop adds 0 to f->credit (which stays <= 0) and goto begin loops forever under the qdisc lock, creating a soft lockup. Clamp psched_mtu() to [1, 1 << 20] before
In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_codel: clamp default quantum and mtu fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(), causing an infinite loop and soft lockup. Emulate fq_codel_change() and constrain to [256, FQ_CODEL_QUANTUM_MAX]. The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit below, and fq_codel_change() never updates it. codel_should_drop() tests
In the Linux kernel, the following vulnerability has been resolved: net/sched: sfq: clamp quantum to avoid signed overflow soft lockup sfq_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) (unsigned). A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, so slot->allot = INT_MIN and INT_MIN + INT_MIN toggles between INT_MIN and 0 forever, spinning sfq_dequeue() under the qdisc lock. Clamp the quantum to [256, 1 << 20] so the refill loop terminates. The lower bound also covers q->quantum == 0 (psched_mtu() returning 0), which spins sfq_dequeue() identically. sfq_change() alr
In the Linux kernel, the following vulnerability has been resolved: tpm: st33zp24: Return zero on status read failure st33zp24_status() ignores the result of the transport read and returns data even when no byte was received. The I2C transport, for example, skips i2c_master_recv() when the register-select write is short or fails, leaving data uninitialized. The resulting stack value can be interpreted as TPM_STS flags and let status checks complete spuriously. The status callback cannot propagate a transport error. Return zero unless recv() reports exactly one byte. With no status bits set, callers retry or take their existing timeout or e
In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at cep
In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by [email protected]. Cap
In the Linux kernel, the following vulnerability has been resolved: slip: remove slip_hangup() to fix use-after-free in slip_receive_buf() Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read in slip_receive_buf() when racing against tty hangup. tty_ldisc_hangup() calls ld->ops->hangup() while holding only a read lock on tty->ldisc_sem (via tty_ldisc_ref()). Because slip_hangup() simply called slip_close(), it ran concurrently with reader functions such as slip_receive_buf(). slip_close() unregisters and frees the net device and its private struct slip, causing concurrent reader threads in slip_receive_buf() to dereference fr
In the Linux kernel, the following vulnerability has been resolved: usb: atm: usbatm: fix invalid ci_range initialization syzbot reported a shift-out-of-bounds in __vcc_connect(): UBSAN: shift-out-of-bounds in net/atm/common.c:382:32 shift exponent -1 is negative CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 ubsan_epilogue+0xa/0x30 lib/ubsan.c:233 __ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494 __vcc_connect+0x14b4/0x19c0
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_htb: limit htb_classify inner-class filter hops htb_classify() follows each filter-selected inner class by switching to cl->filter_list, but never bounds the number of hops. A filter on an inner class can point back to itself or to another inner class that points back, creating an infinite loop in the packet classification path with the qdisc lock held and BH disabled — a soft lockup / panic from a single packet. Bound the traversal with a hop counter and drop the packet with a rate-limited warning once the bound is exceeded. The counter is incremented at th
In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy() skb_zerocopy() copies frags from @from into @to. On an skb_orphan_frags() failure it calls skb_tx_error(@from), a destructive operation on the source skb the copy helper does not own. That completes @from's zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, including the SKBFL_SHARED_FRAG page-ownership marker. Both callers already report the failure on their own drop path. nfnetlink_queue does it at nla_put_failure, and Open vSwitch does it in the flow-miss drop arm of ovs_dp_process_packet(), so nothing is lost
In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify()
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output() The snd_usbmidi_us122l_output() picks a count of 2 on anything slower than high speed and never relates it to ep->max_transfer. The URB buffer holds exactly max_transfer bytes, so a device declaring a one byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX. Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at 0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the USB core only clamps downwar
In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage infrastructure and schedules the delayed scan work. The driver then calls ene_get_card_type(), which sends an ENE command through ene_send_scsi_cmd() and the usb-storage bulk transfer helpers. Both the delayed scan work, through usb_stor_Bulk_max_lun(), and ene_get_card_type() use us->current_urb. The scan work serializes this access with us->dev_mutex, but the ENE card-type probe does not. If the scan work runs while ene_get_card_type()
In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis.
In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but dev->state is checked after acquiring the lock. Therefore a concurrent bind can change the device state between these operations, which can leave ioctl with a stale NULL gadget pointer and causing a NULL pointer dereference at gadget->ops->ioctl. Read dev->gadget while holding dev->lock so that the gadget pointer and device state are sampled consistently.
Check your installed stack and versions against the current vulnerability feeds.