In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→
In the Linux kernel, the following vulnerability has been resolved:
usb: yurex: fix race in probe
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data.
USB: core: Limit the length of unkillable synchronous timeouts
In the Linux kernel, the following vulnerability has been resolved:
USB: core: Limit the length of unkillable synchronous timeouts
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short eno
usb: class: cdc-wdm: fix reordering issue in read code path
In the Linux kernel, the following vulnerability has been resolved:
usb: class: cdc-wdm: fix reordering issue in read code path
Quoting the bug report:
Due to compiler optimization or CPU out-of-order execution, the
desc->length update can be reordered before the memmove. If this
happens, wdm_read() can see the new length and call copy_to_user() on
uninitialized memory. This also violates LKMM data race rules [1].
Fix it by using WRITE_ONCE and memory barriers.
usb: renesas_usbhs: fix use-after-free in ISR during device removal
In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: fix use-after-free in ISR during device removal
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called.
In the Linux kernel, the following vulnerability has been resolved:
usb: image: mdc800: kill download URB on timeout
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results
powerpc, perf: Check that current->mm is alive before getting user callchain
In the Linux kernel, the following vulnerability has been resolved:
powerpc, perf: Check that current->mm is alive before getting user callchain
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
[26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0)
[26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588
[26215.051952]
kprobes: avoid crash when rmmod/insmod after ftrace killed
In the Linux kernel, the following vulnerability has been resolved:
kprobes: avoid crash when rmmod/insmod after ftrace killed
After we hit ftrace is killed by some errors, the kernel crash if
we remove modules in which kprobe probes.
BUG: unable to handle page fault for address: fffffbfff805000d
PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
RIP: 0010:kprobes_module_callback+0x89/0x790
RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02
RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does
libceph: Use u32 for non-negative values in ceph_monmap_decode()
In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. Thi
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: properly validate the data in rtw_get_ie_ex()
Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds
read in rtw_get_ie() parser"), we don't trust the data in the frame so
we should check the length better before acting on it
net/tcp-md5: Fix MAC comparison to be constant-time
In the Linux kernel, the following vulnerability has been resolved:
net/tcp-md5: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
x86/apic: Disable x2apic on resume if the kernel expects so
In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmwa
btrfs: fix transaction abort when snapshotting received subvolumes
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort when snapshotting received subvolumes
Currently a user can trigger a transaction abort by snapshotting a
previously received snapshot a bunch of times until we reach a
BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we
can store in a leaf). This is very likely not common in practice, but
if it happens, it turns the filesystem into RO mode. The snapshot, send
and set_received_subvol and subvol_setflags (used by receive) don't
require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user
could use this to turn a filesy
btrfs: fix transaction abort on set received ioctl due to item overflow
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on set received ioctl due to item overflow
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMI
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup.
comedi: Reinit dev->spinlock between attachments to low-level drivers
In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can b