p PatchFirst

PatchFirst · Latest vulnerabilities

linux-aws vulnerabilities · Page 195

Vulnerabilities published for linux-aws in the last 30 days: 271. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 5072

  1. CVE-2024-44940

    High · CVSS 7.5EPSS 0.75%Fix available

    fou: remove warn in gue_gro_receive on unsupported protocol

    In the Linux kernel, the following vulnerability has been resolved: fou: remove warn in gue_gro_receive on unsupported protocol Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks").

    • Update to 4.4.0-1175.190
    Published Updated
  2. CVE-2024-44939

    High · CVSS 7.8EPSS 0.23%No fix published

    jfs: fix null ptr deref in dtInsertEntry

    In the Linux kernel, the following vulnerability has been resolved: jfs: fix null ptr deref in dtInsertEntry [syzbot reported] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5061 Comm: syz-executor404 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:dtInsertEntry+0xd0c/0x1780 fs/jfs/jfs_dtree.c:3713 ... [Analyze] In dtInsertEntry(), when the pointer h has the same value as p, after writing name

    Published Updated
  3. CVE-2024-44938

    Medium · CVSS 5.5EPSS 0.22%Fix available

    jfs: Fix shift-out-of-bounds in dbDiscardAG

    In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found.

    • Update to 4.4.0-1179.194
    Published Updated
  4. CVE-2024-44931

    Medium · CVSS 5.5EPSS 0.25%Fix available

    gpio: prevent potential speculation leaks in gpio_device_get_desc()

    In the Linux kernel, the following vulnerability has been resolved: gpio: prevent potential speculation leaks in gpio_device_get_desc() Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Securi

    • Update to 4.4.0-1179.194
    Published Updated
  5. CVE-2024-43914

    Medium · CVSS 5.5EPSS 0.23%Fix available

    md/raid5: avoid BUG_ON() while continue reshape after reassembling

    In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid BUG_ON() while continue reshape after reassembling Currently, mdadm support --revert-reshape to abort the reshape while reassembling, as the test 07revert-grow. However, following BUG_ON() can be triggerred by the test: kernel BUG at drivers/md/raid5.c:6278! invalid opcode: 0000 [#1] PREEMPT SMP PTI irq event stamp: 158985 CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94 RIP: 0010:reshape_request+0x3f1/0xe60 Call Trace: <TASK> raid5_sync_request+0x43d/0x550 md_do_sync+0xb7a/0x2110 md_thread+0x294/0x2b0 kthread+0x147/0x1c0 re

    • Update to 4.4.0-1178.193
    Published Updated
  6. CVE-2024-43912

    Medium · CVSS 5.5EPSS 0.21%No fix published

    wifi: nl80211: disallow setting special AP channel widths

    In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: disallow setting special AP channel widths Setting the AP channel width is meant for use with the normal 20/40/... MHz channel width progression, and switching around in S1G or narrow channels isn't supported. Disallow that.

    Published Updated
  7. CVE-2024-43900

    High · CVSS 7.8EPSS 0.21%Fix available

    media: xc2028: avoid use-after-free in load_firmware_cb()

    In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tun

    • Update to 4.4.0-1179.194
    Published Updated
  8. CVE-2024-43893

    Medium · CVSS 5.5EPSS 0.26%Fix available

    serial: core: check uartclk for zero to avoid divide by zero

    In the Linux kernel, the following vulnerability has been resolved: serial: core: check uartclk for zero to avoid divide by zero Calling ioctl TIOCSSERIAL with an invalid baud_base can result in uartclk being zero, which will result in a divide by zero error in uart_get_divisor(). The check for uartclk being zero in uart_set_info() needs to be done before other settings are made as subsequent calls to ioctl TIOCSSERIAL for the same port would be impacted if the uartclk check was done where uartclk gets set. Oops: divide error: 0000 PREEMPT SMP KASAN PTI RIP: 0010:uart_get_divisor (drivers/tty/serial/serial_core.c:580) Call Trace: <TASK>

    • Update to 4.4.0-1179.194
    Published Updated
  9. CVE-2024-43892

    High · CVSS 7.8EPSS 0.25%Fix available

    memcg: protect concurrent access to mem_cgroup_idr

    In the Linux kernel, the following vulnerability has been resolved: memcg: protect concurrent access to mem_cgroup_idr Commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") decoupled the memcg IDs from the CSS ID space to fix the cgroup creation failures. It introduced IDR to maintain the memcg ID space. The IDR depends on external synchronization mechanisms for modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace() happen within css callback and thus are protected through cgroup_mutex from concurrent modifications. However idr_remove() for mem_cgroup_idr was not protected against co

    • Update to 4.4.0-1179.194
    Published Updated
  10. CVE-2024-43884

    Medium · CVSS 5.5EPSS 0.26%Fix available

    Bluetooth: MGMT: Add error handling to pair_device()

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function.

    • Update to 4.4.0-1177.192
    Published Updated
  11. CVE-2024-43883

    Critical · CVSS 9.8EPSS 0.65%No fix published

    usb: vhci-hcd: Do not drop references before new references are gained

    In the Linux kernel, the following vulnerability has been resolved: usb: vhci-hcd: Do not drop references before new references are gained At a few places the driver carries stale pointers to references that can still be used. Make sure that does not happen. This strictly speaking closes ZDI-CAN-22273, though there may be similar races in the driver.

    Published Updated
  12. CVE-2022-48938

    Medium · CVSS 5.5EPSS 0.21%Fix available

    CDC-NCM: avoid overflow in sanity checking

    In the Linux kernel, the following vulnerability has been resolved: CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned.

    • Update to 4.4.0-1176.191
    Published Updated
  13. CVE-2022-48931

    Medium · CVSS 4.7EPSS 0.17%No fix published

    configfs: fix a race in configfs_{,un}register_subsystem()

    In the Linux kernel, the following vulnerability has been resolved: configfs: fix a race in configfs_{,un}register_subsystem() When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group

    Published Updated
  14. CVE-2022-48928

    Medium · CVSS 5.5EPSS 0.21%No fix published

    iio: adc: men_z188_adc: Fix a resource leak in an error handling path

    In the Linux kernel, the following vulnerability has been resolved: iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function.

    Published Updated
  15. CVE-2022-48943

    High · CVSS 7.1EPSS 0.25%Fix available

    KVM: x86/mmu: make apf token non-zero to fix bug

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may l

    • Update to 4.4.0-1176.191
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →