In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range.
ALSA: caiaq: fix stack out-of-bounds read in init_card
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stac
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function.
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing
usb: ulpi: fix double free in ulpi_register_interface() error path
In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix double free in ulpi_register_interface() error path
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface().
comedi: dt2815: add hardware detection to prevent crash
In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: err
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure.
comedi: me_daq: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the
comedi: me4000: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmwar
vxlan: validate ND option lengths in vxlan_na_create
In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop
A race condition between gether_disconnect() and eth_stop() leads to a
NULL pointer dereference. Specifically, if eth_stop() is triggered
concurrently while gether_disconnect() is tearing down the endpoints,
eth_stop() attempts to access the cleared endpoint descriptor, causing
the following NPE:
Unable to handle kernel NULL pointer dereference
Call trace:
__dwc3_gadget_ep_enable+0x60/0x788
dwc3_gadget_ep_enable+0x70/0xe4
usb_ep_enable+0x60/0x15c
eth_stop+0xb8/0x108
Because eth_stop() cr
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Us
usb: gadget: f_eem: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_eem: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_m
usb: gadget: f_subset: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, th
usb: gadget: f_uac1_legacy: validate control request size
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate control request size
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object.
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
In rxrpc_preparse(), there are two paths for parsing key payloads: the
XDR path (for large payloads) and the non-XDR path (for payloads <= 28
bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly
validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR
path fails to do so.
This allows an unprivileged user to provide a very large ticket length.
When this key is later read via rxrpc_read(), the total
token size (toksize) calculation results in a value that exceeds
AFSTOKEN_LENGTH
rtnetlink: add missing netlink_ns_capable() check for peer netns
In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: add missing netlink_ns_capable() check for peer netns
rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer
network namespace when creating paired devices (veth, vxcan,
netkit). This allows an unprivileged user with a user namespace
to create interfaces in arbitrary network namespaces, including
init_net.
Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer
namespace before allowing device creation to proceed.
In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: fix double free via VMA splitting
privcmd_vm_ops defines .close (privcmd_close), but neither .may_split
nor .open. When userspace does a partial munmap() on a privcmd mapping,
the kernel splits the VMA via __split_vma(). Since may_split is NULL,
the split is allowed. vm_area_dup() copies vm_private_data (a pages
array allocated in alloc_empty_pages()) into the new VMA without any
fixup, because there is no .open callback.
Both VMAs now point to the same pages array. When the unmapped portion
is closed, privcmd_close() calls:
- xen_unmap_domain_gfn_range()