linux vulnerabilities · Page 182

mm/slub: Avoid list corruption when removing a slab from the full list

In the Linux kernel, the following vulnerability has been resolved: mm/slub: Avoid list corruption when removing a slab from the full list Boot with slub_debug=UFPZ. If allocated object failed in alloc_consistency_checks, all objects of the slab will be marked as used, and then the slab will be removed from the partial list. When an object belonging to the slab got freed later, the remove_full() function is called. Because the slab is neither on the partial list nor on the full list, it eventually lead to a list corruption (actually a list poison being detected). So we need to mark and isolate the slab page with metadata corruption, do n

drm/amdgpu: fix usage slab after free

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix usage slab after free [ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched] [ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147 [ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1 [ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000016] Call Trace: [ +0.000008] <TASK> [ +0.000009] dump_stack_lvl+0x76/0xa0 [ +0.000017] print_report+0xce/0x5f0 [ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [

• Update to 4.4.0-269.303

hfsplus: don't query the device logical block size multiple times

In the Linux kernel, the following vulnerability has been resolved: hfsplus: don't query the device logical block size multiple times Devices block sizes may change. One of these cases is a loop device by using ioctl LOOP_SET_BLOCK_SIZE. While this may cause other issues like IO being rejected, in the case of hfsplus, it will allocate a block by using that size and potentially write out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the latter function reads a different io_size. Using a new min_io_size initally set to sb_min_blocksize works for the purposes of the original fix, since it will be set to the max between HFS

• Update to 4.4.0-278.312

wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan() Replace one-element array with a flexible-array member in `struct mwifiex_ie_types_wildcard_ssid_params` to fix the following warning on a MT8173 Chromebook (mt8173-elm-hana): [ 356.775250] ------------[ cut here ]------------ [ 356.784543] memcpy: detected field-spanning write (size 6) of single field "wildcard_ssid_tlv->ssid" at drivers/net/wireless/marvell/mwifiex/scan.c:904 (size 1) [ 356.813403] WARNING: CPU: 3 PID: 742 at drivers/net/wireless/marvell/mwifiex/scan.c:904 mwifiex_scan_n

ALSA: usx2y: Use snd_card_free_when_closed() at disconnection

In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Use snd_card_free_when_closed() at disconnection The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close.

ALSA: us122l: Use snd_card_free_when_closed() at disconnection

In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Use snd_card_free_when_closed() at disconnection The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close. The

ALSA: caiaq: Use snd_card_free_when_closed() at disconnection

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Use snd_card_free_when_closed() at disconnection The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close. This

ALSA: 6fire: Release resources at card release

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: Release resources at card release The current 6fire code tries to release the resources right after the call of usb6fire_chip_abort(). But at this moment, the card object might be still in use (as we're calling snd_card_free_when_closed()). For avoid potential UAFs, move the release of resources to the card's private_free instead of the manual call of usb6fire_chip_destroy() at the USB disconnect callback.

• Update to 4.4.0-271.305

scsi: bfa: Fix use-after-free in bfad_im_module_exit()

In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Fix use-after-free in bfad_im_module_exit() BUG: KASAN: slab-use-after-free in __lock_acquire+0x2aca/0x3a20 Read of size 8 at addr ffff8881082d80c8 by task modprobe/25303 Call Trace: <TASK> dump_stack_lvl+0x95/0xe0 print_report+0xcb/0x620 kasan_report+0xbd/0xf0 __lock_acquire+0x2aca/0x3a20 lock_acquire+0x19b/0x520 _raw_spin_lock+0x2b/0x40 attribute_container_unregister+0x30/0x160 fc_release_transport+0x19/0x90 [scsi_transport_fc] bfad_im_module_exit+0x23/0x60 [bfa] bfad_init+0xdb/0xff0 [bfa] do_one_initcall+0xdc/0x550 do_init_module+0x22d/0x6b0 loa

• Update to 4.4.0-267.301

NFSD: Prevent NULL dereference in nfsd4_process_cb_update()

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update() @ses is initialized to NULL. If __nfsd4_find_backchannel() finds no available backchannel session, setup_callback_client() will try to dereference @ses and segfault.

• Update to 4.4.0-276.310

vfio/pci: Properly hide first-in-list PCIe extended capability

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Properly hide first-in-list PCIe extended capability There are cases where a PCIe extended capability should be hidden from the user. For example, an unknown capability (i.e., capability with ID greater than PCI_EXT_CAP_ID_MAX) or a capability that is intentionally chosen to be hidden from the user. Hiding a capability is done by virtualizing and modifying the 'Next Capability Offset' field of the previous capability so it points to the capability after the one that should be hidden. The special case where the first capability in the list should be hidden is han

s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()

In the Linux kernel, the following vulnerability has been resolved: s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct() Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted:

xen: Fix the issue of resource not being properly released in xenbus_dev_probe()

In the Linux kernel, the following vulnerability has been resolved: xen: Fix the issue of resource not being properly released in xenbus_dev_probe() This patch fixes an issue in the function xenbus_dev_probe(). In the xenbus_dev_probe() function, within the if (err) branch at line 313, the program incorrectly returns err directly without releasing the resources allocated by err = drv->probe(dev, id). As the return value is non-zero, the upper layers assume the processing logic has failed. However, the probe operation was performed earlier without a corresponding remove operation. Since the probe actually allocates resources, failing to perf

ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration.

• Update to 4.4.0-270.304

KVM: arm64: Get rid of userspace_irqchip_in_use

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Get rid of userspace_irqchip_in_use Improper use of userspace_irqchip_in_use led to syzbot hitting the following WARN_ON() in kvm_timer_update_irq(): WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459 kvm_timer_update_irq+0x21c/0x394 Call trace: kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459 kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968 kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264 kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline] kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inlin

PCI: Fix use-after-free of slot->bus on hot remove

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix use-after-free of slot->bus on hot remove Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock. Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware"), USB4 v2 and v1 Host Routers are reset on probe of the thunderbolt driver. The reset clears the Presence Detect State and Data Link Layer Link Active bits at the USB4 Host Router's Root Port and thus causes hot removal of the dock. The crash occurs when pciehp is unbound from one of the dock's Downst

wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failures

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failures Syzkaller reported a hung task with uevent_show() on stack trace. That specific issue was addressed by another commit [0], but even with that fix applied (for example, running v6.12-rc5) we face another type of hung task that comes from the same reproducer [1]. By investigating that, we could narrow it to the following path: (a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and dummy_hcd infrastructure. (b) During the probe of rtl8192cu, the driver ends-up performing an efuse

um: ubd: Do not use drvdata in release

In the Linux kernel, the following vulnerability has been resolved: um: ubd: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the ubd instance. Otherwise, removing a ubd device will result in a crash: RIP: 0033:blk_mq_free_tag_set+0x1f/0xba RSP: 00000000e2083bf0 EFLAGS: 00010246 RAX: 000000006021463a RBX: 0000000000000348 RCX: 0000000062604d00 RDX: 0000000004208060 RSI: 00000000605241a0 RDI: 0000000000000348 RBP: 00000000e2083c10 R08: 0000000062414010 R09: 00000000601603f7 R10: 000000000000133a R11: 000000006038c4bd R12: 0000000000000000 R13: 0000000060213a5c R14: 0000000062405d20

um: net: Do not use drvdata in release

In the Linux kernel, the following vulnerability has been resolved: um: net: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the uml_net instance. Otherwise, removing a network device will result in a crash: RIP: 0033:net_device_release+0x10/0x6f RSP: 00000000e20c7c40 EFLAGS: 00010206 RAX: 000000006002e4e7 RBX: 00000000600f1baf RCX: 00000000624074e0 RDX: 0000000062778000 RSI: 0000000060551c80 RDI: 00000000627af028 RBP: 00000000e20c7c50 R08: 00000000603ad594 R09: 00000000e20c7b70 R10: 000000000000135a R11: 00000000603ad422 R12: 0000000000000000 R13: 0000000062c7af00 R14: 000000006

smb: client: fix use-after-free of signing key

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @