PatchFirst · Latest vulnerabilities
Vulnerabilities published for linux in the last 30 days: 322. Listed in the KEV catalogue: 0.
Vulnerabilities: 5321
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx11: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd)
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid() The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only valid while the lock is still being held. Once xa_unlock_irqrestore is called and returned, the pointer is no longer under lock and is subject to modification. Since, the caller still dereferences vm->task_info in amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a use after unlock problem. Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid() through removing the amdgpu_vm_get_vm_from_pasid() function from am
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Release VFCT ACPI table reference amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table() but never releases it. acpi_get_table() takes a reference on the table (incrementing its validation_count and mapping it on the 0->1 transition); without a paired acpi_put_table() the mapping is leaked on every call, whether or not a matching VBIOS image is found. Route all exit paths after the table is acquired through a common acpi_put_table(). The VBIOS image is copied out with kmemdup() before the table is released, so it remains valid for the caller. (ch
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: dce100: skip non-DP stream encoders for DP MST On DCE8-class ASICs (e.g. Bonaire), the resource pool contains digital DIG stream encoders plus one analog DAC encoder. When assigning a stream encoder for a second DisplayPort MST stream, if the preferred digital encoder is already acquired, dce100_find_first_free_match_stream_enc_for_link() falls back to the first free pool entry. That entry may be the analog encoder, whose funcs table lacks DP hooks such as dp_set_stream_attribute. The subsequent atomic commit then dereferences NULL function pointers in link
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved amdgpu_bo_create_reserved() only allocates a new BO when *bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is NULL, it simply skips creation when *bo_ptr is non-NULL. But it unconditionally reserves, pins, gart allocates and maps the BO afterwards. When the same non-NULL BO pointer is passed in again, for example firmware buffers that live in adev and are re-loaded on every resume / cp_resume / start under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases pin_count unconditionally, however the matching t
In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. airspy_start_streaming() returned -ENODEV early when the USB device had been disconnected (s->udev == NULL) without returning any buffers that buf_queue() had already accepted. Take v4l2_lock first and jump to the existing err_clea
In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the driver state lifetime so that it is released on driver unbind.
In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure.
In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptib
In the Linux kernel, the following vulnerability has been resolved: media: pci: dm1105: Free allocated workqueue Destroy allocated workqueue in remove() callback to free its resources, thus fixing memory leak.
In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails
In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued
In the Linux kernel, the following vulnerability has been resolved: media: radio-si476x: Unregister v4l2_device on probe failure si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2 controls and before registering the video device. If any of those later steps fails, probe returns through the exit label after freeing only the control handler. A failed probe does not call si476x_radio_remove(), so the v4l2_device_unregister() there is not reached. This leaves the parent device reference taken by v4l2_device_register() behind on the error path. Unregister the V4L2 device in the probe error path after freeing the controls.
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, u
In the Linux kernel, the following vulnerability has been resolved: media: saa7134: Fix a possible memory leak in saa7134_video_init1 In saa7134_video_init1(), the return value of the first saa7134_pgtable_alloc() is not checked. If it fails, the function continues as if successful, leaving the driver with an invalid page table. Additionally, if vb2_queue_init() for the VBI queue fails after the video queue page table has been allocated, the allocated memory is not freed before returning. The second saa7134_pgtable_alloc() also lacks a return value check. Errors occur during device probing before the device is fully registered, the normal c
In the Linux kernel, the following vulnerability has been resolved: media: vivid: check for vb2_is_busy() when toggling caps The vivid_update_format_cap/out() functions must only be called if the capture/output queue are not busy. But for the controls that select the CROP/COMPOSE/SCALE capability that is not checked. Only when streaming starts will they be set to 'grabbed' and it is impossible to change the control, but between REQBUFS and STREAMON you are still allowed to set these controls. Since vivid_update_format_cap/out will change the format, this can cause unexpected results. Besides adding these checks, also add a WARN_ON in vivi
In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails.
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: close a re-opened queue timer in the destructor queue_delete() closes the queue timer, then frees it. snd_seq_timer_close() clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and snd_seq_timer_delete() frees q->timer. A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT that took a queueptr() use_lock reference before the queue was unlinked runs snd_seq_timer_open() after the close. Open refuses re-open only while timeri is set, and the close just cleared it, so it re-opens timeri. snd_seq_timer_delete() does not close that i
In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB access from firmware ADDBA window size aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to compute a kzalloc size and stored in rxtid->hold_q_sz, leading to zero-size or overflowed allocations and subsequent out-of-bounds access. Clean up any previously active aggregation session for the TID first, then return early when win_sz is out of the valid range, instead of proceeding with a broken allocatio
In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix use-after-free in aggr_reset_state() The aggr_reset_state() function uses timer_delete() (non-synchronous) for the aggregation timer before proceeding to delete TID state and before the structure is freed by callers like aggr_module_destroy(). If the timer callback (aggr_timeout) is executing when aggr_reset_state() is called, the callback will continue to access aggr_conn fields like rx_tid[] and stat[] which may be freed immediately after by kfree(aggr_info->aggr_conn) in aggr_module_destroy(). Additionally, the timer callback can re-arm itself via mod
Check your installed stack and versions against the current vulnerability feeds.