linux-aws vulnerabilities · Page 200

usbnet: gl620a: fix endpoint checking in genelink_bind()

In the Linux kernel, the following vulnerability has been resolved: usbnet: gl620a: fix endpoint checking in genelink_bind() Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing

efi: Don't map the entire mokvar table to determine its size

In the Linux kernel, the following vulnerability has been resolved: efi: Don't map the entire mokvar table to determine its size Currently, when validating the mokvar table, we (re)map the entire table on each iteration of the loop, adding space as we discover new entries. If the table grows over a certain size, this fails due to limitations of early_memmap(), and we get a failure and traceback: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220 ... Call Trace: <TASK> ? __early_ioremap+0xef/0x220 ? __warn.cold+0x93/0xfa ? __early_ioremap+0xef/0x220 ? repor

sched/core: Prevent rescheduling when interrupts are disabled

In the Linux kernel, the following vulnerability has been resolved: sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_

tee: optee: Fix supplicant wait loop

In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix supplicant wait loop OP-TEE supplicant is a user-space daemon and it's possible for it be hung or crashed or killed in the middle of processing an OP-TEE RPC call. It becomes more complicated when there is incorrect shutdown ordering of the supplicant process vs the OP-TEE client application which can eventually lead to system hang-up waiting for the closure of the client application. Allow the client process waiting in kernel for supplicant response to be killed rather than indefinitely waiting in an unkillable state. Also, a normal uninterruptible wait sh

Kernel Live Patch Security Notice

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that.)(CVE-2023-52880) In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on th

• Update to 4.15.0-1180.193

cifs.upcall makes an upcall to the wrong namespace in containerized environments

A flaw was found in cifs-utils. When trying to obtain Kerberos credentials, the cifs.upcall program from the cifs-utils package makes an upcall to the wrong namespace in containerized environments. This issue may lead to disclosing sensitive data from the host's Kerberos credentials cache.

powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC

In the Linux kernel, the following vulnerability has been resolved: powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c

drop_monitor: fix incorrect initialization order

In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix incorrect initialization order Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw

mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()

In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize() If migration succeeded, we called folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the old to the new folio. This will set memcg_data of the old folio to 0. Similarly, if migration failed, memcg_data of the dst folio is left unset. If we call folio_putback_lru() on such folios (memcg_data == 0), we will add the folio to be freed to the LRU, making memcg code unhappy. Running the hmm selftests: # ./hmm-tests ... # RUN hmm.hmm_device_private.migrate ..

USB: gadget: f_midi: f_midi_complete to call queue_work

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler.

geneve: Fix use-after-free in geneve_find_dev().

In the Linux kernel, the following vulnerability has been resolved: geneve: Fix use-after-free in geneve_find_dev(). syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, us

ibmvnic: Don't reference skb after sending to VIOS

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Don't reference skb after sending to VIOS Previously, after successfully flushing the xmit buffer to VIOS, the tx_bytes stat was incremented by the length of the skb. It is invalid to access the skb memory after sending the buffer to the VIOS because, at any point after sending, the VIOS can trigger an interrupt to free this memory. A race between reading skb->len and freeing the skb is possible (especially during LPM) and will result in use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ibmvnic_

• Update to 4.15.0-1187.200

acct: perform last write from workqueue

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (

btrfs: fix double accounting race when btrfs_run_delalloc_range() failed

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double accounting race when btrfs_run_delalloc_range() failed [BUG] When running btrfs with block size (4K) smaller than page size (64K, aarch64), there is a very high chance to crash the kernel at generic/750, with the following messages: (before the call traces, there are 3 extra debug messages added) BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental BTRFS info (device dm-3): checking UUID tree hrtimer: interrupt took 5451385 ns BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1

usb: gadget: core: flush gadget workqueue after device removal

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: flush gadget workqueue after device removal device_del() can lead to new work being scheduled in gadget->work workqueue. This is observed, for example, with the dwc3 driver with the following call stack: device_del() gadget_unbind_driver() usb_gadget_disconnect_locked() dwc3_gadget_pullup() dwc3_gadget_soft_disconnect() usb_gadget_set_state() schedule_work(&gadget->work) Move flush_work() after device_del() to ensure the workqueue is cleaned up.

usb: gadget: f_midi: fix MIDI Streaming descriptor lengths

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: fix MIDI Streaming descriptor lengths While the MIDI jacks are configured correctly, and the MIDIStreaming endpoint descriptors are filled with the correct information, bNumEmbMIDIJack and bLength are set incorrectly in these descriptors. This does not matter when the numbers of in and out ports are equal, but when they differ the host will receive broken descriptors with uninitialized stack memory leaking into the descriptor for whichever value is smaller. The precise meaning of "in" and "out" in the port counts is not clearly defined and can be conf

PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1

In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1 commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the aff

tomoyo: don't emit warning in tomoyo_write_control()

In the Linux kernel, the following vulnerability has been resolved: tomoyo: don't emit warning in tomoyo_write_control() syzbot is reporting too large allocation warning at tomoyo_write_control(), for one can write a very very long line without new line character. To fix this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE, for practically a valid line should be always shorter than 32KB where the "too small to fail" memory-allocation rule applies. One might try to write a valid line that is longer than 32KB, but such request will likely fail with -ENOMEM. Therefore, I feel that separately returning -EINVAL when a line

KVM: Explicitly verify target vCPU is online in kvm_get_vcpu()

In the Linux kernel, the following vulnerability has been resolved: KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() Explicitly verify the target vCPU is fully online _prior_ to clamping the index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will generate '0', i.e. KVM will return vCPU0 instead of NULL. In practice, the bug is unlikely to cause problems, as it will only come into play if userspace or the guest is buggy or misbehaving, e.g. KVM may send interrupts to vCPU0 instead of dropping them on the floor. However, returning vCPU0 when it shouldn't exist per online_vcpus is problematic now that KVM uses

• Update to 4.15.0-1187.200

wifi: rtlwifi: remove unused check_buddy_priv

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: remove unused check_buddy_priv Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global list of private data structures. Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") started adding the private data to that list at probe time and added a hook, check_buddy_priv to find the private data from a similar device. However, that function was never used. Besides, though there is a lock for that list, it is never used. And when the probe fails, the private data is never removed from the list. This wo