p PatchFirst

PatchFirst · Latest vulnerabilities

linux-raspi-5.4 vulnerabilities · Page 172

Vulnerabilities published for linux-raspi-5.4 in the last 30 days: 485. Listed in the KEV catalogue: 0.

Filter vulnerabilities
Clear filters

Vulnerabilities: 7029

  1. CVE-2023-54305

    Not ratedEPSS 0.21%Fix available

    ext4: refuse to create ea block when umounted

    In the Linux kernel, the following vulnerability has been resolved: ext4: refuse to create ea block when umounted The ea block expansion need to access s_root while it is already set as NULL when umount is triggered. Refuse this request to avoid panic.

    • Update to 5.4.0-1088.99~18.04.1
    Published Updated
  2. CVE-2023-54300

    Medium · CVSS 5.2EPSS 0.23%Fix available

    wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should validate pkt_len before accessing the SKB. For example, the obtained SKB may have been badly constructed with pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr but after being processed in ath9k_htc_rx_msg() and passed to ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI command header which should be located inside its da

    • Update to 5.4.0-1097.109~18.04.2
    Published Updated
  3. CVE-2023-54299

    Medium · CVSS 5.1EPSS 0.21%Fix available

    usb: typec: bus: verify partner exists in typec_altmode_attention

    In the Linux kernel, the following vulnerability has been resolved: usb: typec: bus: verify partner exists in typec_altmode_attention Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to t

    • Update to 5.4.0-1100.112~18.04.1
    Published Updated
  4. CVE-2023-54295

    Low · CVSS 2.4EPSS 0.2%No fix published

    mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type

    In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0x

    Published Updated
  5. CVE-2023-54294

    Not ratedEPSS 0.21%Fix available

    md/raid10: fix memleak of md thread

    In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix memleak of md thread In raid10_run(), if setup_conf() succeed and raid10_run() failed before setting 'mddev->thread', then in the error path 'conf->thread' is not freed. Fix the problem by setting 'mddev->thread' right after setup_conf().

    • Update to 5.4.0-1093.104~18.04.1
    Published Updated
  6. CVE-2023-54289

    Not ratedEPSS 0.21%Fix available

    scsi: qedf: Fix NULL dereference in error handling

    In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix NULL dereference in error handling Smatch reported: drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues() warn: missing unwind goto? At this point in the function, nothing has been allocated so we can return directly. In particular the "qedf->global_queues" have not been allocated so calling qedf_free_global_queues() will lead to a NULL dereference when we check if (!gl[i]) and "gl" is NULL.

    • Update to 5.4.0-1097.109~18.04.2
    Published Updated
  7. CVE-2023-54287

    Not ratedEPSS 0.2%No fix published

    tty: serial: imx: disable Ageing Timer interrupt request irq

    In the Linux kernel, the following vulnerability has been resolved: tty: serial: imx: disable Ageing Timer interrupt request irq There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort inf

    Published Updated
  8. CVE-2023-54286

    High · CVSS 7.6EPSS 0.3%Fix available

    wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace

    In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwla

    • Update to 5.4.0-1093.104~18.04.1
    Published Updated
  9. CVE-2023-54284

    High · CVSS 7.1EPSS 0.16%Fix available

    media: av7110: prevent underflow in write_ts_to_decoder()

    In the Linux kernel, the following vulnerability has been resolved: media: av7110: prevent underflow in write_ts_to_decoder() The buf[4] value comes from the user via ts_play(). It is a value in the u8 range. The final length we pass to av7110_ipack_instant_repack() is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is not negative. It's not clear that passing a negative len value does anything bad necessarily, but it's not best practice. With the new bounds checking the "if (!len)" condition is no longer possible or required so remove that.

    • Update to 5.4.0-1093.104~18.04.1
    Published Updated
  10. CVE-2023-54283

    Low · CVSS 0EPSS 0.21%Fix available

    bpf: Address KCSAN report on bpf_lru_list

    In the Linux kernel, the following vulnerability has been resolved: bpf: Address KCSAN report on bpf_lru_list KCSAN reported a data-race when accessing node->ref. Although node->ref does not have to be accurate, take this chance to use a more common READ_ONCE() and WRITE_ONCE() pattern instead of data_race(). There is an existing bpf_lru_node_is_ref() and bpf_lru_node_set_ref(). This patch also adds bpf_lru_node_clear_ref() to do the WRITE_ONCE(node->ref, 0) also. ================================================================== BUG: KCSAN: data-race in __bpf_lru_list_rotate / __htab_lru_percpu_map_update_elem write to 0xffff888137038de

    • Update to 5.4.0-1097.109~18.04.2
    Published Updated
  11. CVE-2023-54282

    Not ratedEPSS 0.23%Fix available

    media: tuners: qt1010: replace BUG_ON with a regular error

    In the Linux kernel, the following vulnerability has been resolved: media: tuners: qt1010: replace BUG_ON with a regular error BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34

    • Update to 5.4.0-1100.112~18.04.1
    Published Updated
  12. CVE-2023-54281

    Medium · CVSS 5.7EPSS 0.2%No fix published

    btrfs: release path before inode lookup during the ino lookup ioctl

    In the Linux kernel, the following vulnerability has been resolved: btrfs: release path before inode lookup during the ino lookup ioctl During the ino lookup ioctl we can end up calling btrfs_iget() to get an inode reference while we are holding on a root's btree. If btrfs_iget() needs to lookup the inode from the root's btree, because it's not currently loaded in memory, then it will need to lock another or the same path in the same root btree. This may result in a deadlock and trigger the following lockdep splat: WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Not tainted ----------

    Published Updated
  13. CVE-2022-50881

    High · CVSS 7EPSS 0.2%No fix published

    wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect()

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix use-after-free in ath9k_hif_usb_disconnect() This patch fixes a use-after-free in ath9k that occurs in ath9k_hif_usb_disconnect() when ath9k_destroy_wmi() is trying to access 'drv_priv' that has already been freed by ieee80211_free_hw(), called by ath9k_htc_hw_deinit(). The patch moves ath9k_destroy_wmi() before ieee80211_free_hw(). Note that urbs from the driver should be killed before freeing 'wmi' with ath9k_destroy_wmi() as their callbacks will access 'wmi'. Found by a modified version of syzkaller. ====================================================

    Published Updated
  14. CVE-2023-54279

    Not ratedEPSS 0.23%Fix available

    MIPS: fw: Allow firmware to pass a empty env

    In the Linux kernel, the following vulnerability has been resolved: MIPS: fw: Allow firmware to pass a empty env fw_getenv will use env entry to determine style of env, however it is legal for firmware to just pass a empty list. Check if first entry exist before running strchr to avoid null pointer dereference.

    • Update to 5.4.0-1093.104~18.04.1
    Published Updated
  15. CVE-2023-54277

    Low · CVSS 2.4EPSS 0.21%Fix available

    fbdev: udlfb: Fix endpoint check

    In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: Fix endpoint check The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google

    • Update to 5.4.0-1093.104~18.04.1
    Published Updated
  16. CVE-2023-54274

    Not ratedEPSS 0.21%No fix published

    RDMA/srpt: Add a check for valid 'mad_agent' pointer

    In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Add a check for valid 'mad_agent' pointer When unregistering MAD agent, srpt module has a non-null check for 'mad_agent' pointer before invoking ib_unregister_mad_agent(). This check can pass if 'mad_agent' variable holds an error value. The 'mad_agent' can have an error value for a short window when srpt_add_one() and srpt_remove_one() is executed simultaneously. In srpt module, added a valid pointer check for 'sport->mad_agent' before unregistering MAD agent. This issue can hit when RoCE driver unregisters ib_device Stack Trace: ------------ BUG: kernel NULL

    Published Updated
  17. CVE-2023-54271

    Not ratedEPSS 0.21%No fix published

    blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init

    In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init blk-iocost sometimes causes the following crash: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... RIP: 0010:_raw_spin_lock+0x17/0x30 Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 <f0> 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00 RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001 RDX: ffffc900023b3d20

    Published Updated
  18. CVE-2023-54270

    Medium · CVSS 5.4EPSS 0.21%Fix available

    media: usb: siano: Fix use after free bugs caused by do_submit_urb

    In the Linux kernel, the following vulnerability has been resolved: media: usb: siano: Fix use after free bugs caused by do_submit_urb There are UAF bugs caused by do_submit_urb(). One of the KASan reports is shown below: [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890 [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49 [ 36.408316] [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8 [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584 [ 36.416157] Workqueue: 0x0 (events) [ 36.417654] Call Trace: [

    • Update to 5.4.0-1088.99~18.04.1
    Published Updated
  19. CVE-2023-54268

    Not ratedEPSS 0.21%Fix available

    debugobjects: Don't wake up kswapd from fill_pool()

    In the Linux kernel, the following vulnerability has been resolved: debugobjects: Don't wake up kswapd from fill_pool() syzbot is reporting a lockdep warning in fill_pool() because the allocation from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM) and therefore tries to wake up kswapd, which acquires kswapd_wait::lock. Since fill_pool() might be called with arbitrary locks held, fill_pool() should not assume that acquiring kswapd_wait::lock is safe. Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for !__GFP_DIRECT_RECLAIM allocation.

    • Update to 5.4.0-1093.104~18.04.1
    Published Updated

Check your server

Check your installed stack and versions against the current vulnerability feeds.

Check your server →